Seyed Ehsan Abdollahi

Seyed Ehsan Abdollahi

سید احسان عبداللهی
Email:  e.abdollahi[at]nit.ac.ir

Assistant Professor
School of Electrical and Computer Engineering
Babol University of Technology
47148-71167, Babol, Iran
 
Qualifications
IEEE Senior Member

Ph.D., Power Electrical Engineering, University of Tehran, Tehran, Iran, 2008-2014
Thesis Title: Design and Optimization of a Linear Flux Switching Motor with Segmented Secondary

M.Sc., Power Electrical Engineering, Iran University of Science & Technology, Tehran, Iran, 2002-2005
Thesis Title: Dynamic Modeling of a Microturbine Generation System

B.Sc., Power Electrical Engineering, Amirkabir University of Technology, Tehran, Iran, 1998-2002
Thesis Title: Analytical Modeling of a Disk Induction Motor
 
Research Interests
  • Design, analysis, modelling and control of electrical machine
  • Power Electronics
  • Electric Vehicles
  • Solid State Transformers(SST)

 
Honors and Awards
  • Graduated as first rank of honor B.Sc. student
  • Distinguished B.Sc. student
 
Previous and Present Positions
  • International steering committee of 16th International Power Electronics and Motion Control Conference and Exposition, PEMC2014.
  • Consultant at Niroo Research Center
  • Consultant at Iran Khodro Sazeh Co.





 
Professional Membership
  • IEEE Member
  • IEEE Magnetic Society Member
  • IEEE Power and Energy Society Member
  • IEEE Power Electronics Society Member
  • Reviewer of the following publications:
    -IEEE Transactions on Magnetics
    -IEEE Transactions on Industrial Electronics
 
Teaching Experiences
Undergraduate:
  • Electric Machine I
  • Electric Machine II
  • Electric Machine III
  • Electric Circuit II
  • Industrial Electronics
  • Electric Measurement
  • Electric Machine Lab
Graduate:
  • Electric Machine Design
  • Transformer and Inductor Design for Power Electronic Applications
  • Modern Electric Machines
 
Publications

Journal papers:

  1. S.E. Abdollahi, M.Mirzayee, M.Mirsalim, " Design and Analysis of a Double Sided Linear Induction Motor for Transportation", accepted for publication at IEEE Trans. On Magnetics, 2015.
  2. S.E. Abdollahi, S. Vaez-zadeh, "Back EMF analysis of a Novel Linear Flux Switching Motor with Segmented Secondary", IEEE Trans. On Magnetics, vol. 50,, issue 4, Apr. 2014.
  3. S.E. Abdollahi, S. Vaez-zadeh, "Reducing Cogging Torque in Flux Switching Motors with Segmented Rotor ", IEEE Trans. On Magnetics, vol. 49, issue 10, Oct. 2013.
  4.  S.E. Abdollahi, S. Vaez-zadeh, "Modeling and Performance Evaluation of a Linear Flux Switching Motor with Segmented Secondary for Maglev" IEEE Trans. On Magnetics (revision requested).
  5. M. Mirzaei, S.E. Abdollahi, , H. Lesani, ,” A large linear interior permanent magnet motor for electromagnetic launcher”, IEEE Trans. on Plasma Science, Vol. 39,  Issue. 6, pp: 1566-1570.
  6.  M.Mirzayei, S.E. Abdollahi, " Design Optimization of Reluctance-Synchronous Linear Machines for Electromagnetic Aircraft Launch System”, IEEE Trans. On Magnetics,Vol.45, No.1, pp. 389 – 395.
  7.   M.Mirzayei, M.Mirsalim, S.E. Abdollahi,” Analytical Modeling of Axial Air Gap Solid Rotor Induction Machine Using Quasi three dimensional Method”, IEEE Trans. On Magnetics,Vol.43,No.7, July 2007.
  8.  S.E.Abdollahi, M.Mirzayei, M.Mirsalim, M.Ehsani, S.Gay, “Two-Dimensional Finite Element and Analytical Modeling of a Solid Rotor Disk Induction Motor”, International Scientific Quarterly ‘ELECTROMOTION’ (ISSN 1223 – 057X), Vol. 10 (2003), No. 3

9.     مهران میرزایی، مجتبی میرسلیم، سید احسان عبداللهی،"ارائه روشهای تحلیلی و اجزا محدود برای بررسی عملکرد موتور القایی دیسکی شکل" مجله علمی پژوهشی دانشگاه صنعتی امیرکبیر، سال پانزدهم، شماره آ-58، بهار 1383

Conference Papers: 

1.      S. M. Kazemi Sangdehi, S. E. Abdollahi and S. A. Gholamian ,” Investigation of Field to Armature Slot Area Ratio on Torque Ripple in HEFS Machine” published in proceeding of   XXIIth International Conference on
Electrical Machines (ICEM'2016), Switzerland, September, 2016  

2.      S.E. Abdollahi, M. Mirzaei,” Analysis of Linear Induction Motor for Urban Transportation” Proc. of Eighth International Symposium on Linear Drives for Industry Applications (LDIA 2011), Netherland, 2011.

3.         M. Mirzaei, S.E. Abdollahi, ,”A Large Linear Interior Permanent Magnet Motor for Electromagnetic Launcher “published in proceeding of 15th International Symposium on Electromagnetic Launch Technology Symposium ,Belgium,2010

4.       S.E. Abdollahi, M. Mirzaei, H. Lesani “A Linear Reluctance Synchronous Motor for Urban Transportation”, published in proceeding of seventh International Symposium on Linear Drives for Industry Applications (LDIA 2010), Korea, 2009.

5.       S.E. Abdollahi, M. Mirzaei, H. Lesani ,“Rotor Optimization of a Segmented Reluctance Synchronous Motor Utilizing Genetic Algorithm”, published in proceeding of The International Conference on Electrical Machines and Systems         (ICEMS2009), Tokyo, Japan 2009

6.       M. Mirzaei, S.E. Abdollahi “Design and Analysis of Linear Reluctance Machine for Transportation” published in proceeding of 20th International conference on Magnetically levitated systems and Linear drives (Maglev 2008), San Diego, USA, 2008.

7.      S.E. Abdollahi, M. Mirzaei, , A.Vahedi” Permanent Magnet DC Linear Motor for Aircraft Electromagnetic Launcher “published in proceeding of 14th International Symposium on Electromagnetic Launch Technology Symposium ,Canada,2008

8.       M. Mirzaei, S.E. Abdollahi,” Design Optimization of Reluctance Synchronous Linear Machines for Electromagnetic Aircraft Launch System” published in proceeding of  International Symposium on Electromagnetic Launch Technology Symposium,Canada,2008.

9.       S.E.Abdollahi, A.Vahedi, " Dynamic Modeling of High-Speed Permanent Magnet Synchronous Generator for Microturbine Application” published in proceeding of 6th International symposium on Advanced Electromechanical Motion Systems, Switzerland, 2005

10.    S.E.Abdollahi, A.Vahedi,” Dynamic Simulation of MICROTURBINE Generation Systems” published in proceeding of  International Conference on Electricity Distribution, Italy, 2005.

11.    S.E.Abdollahi, M.Mirsalim, M.Mirzayee, A.Vahedi "Performance Analysis of a Solid Rotor Disk Induction Motor", published in proceeding of International Conference on Electrical Machines, ICEM, Poland, 2004.

12.    S.E.Abdollahi, M.Mirzayee, M.Mirsalim, M.Ehsani, S.Gay, “Two-Dimensional Finite Element and Analytical Modeling of a Solid Rotor Disk Induction Motor", Invited paper published in proc. 5th International Symposium on AdvancedElectromechanical Motion Systems, Morocco, 2003.

13.   M. Mirzayee, ,M. Mirsalim, S.E.Abdollahi , "Modeling Disk Induction Motor with Analytical Method",EMF2003,proc. 6th International Symposium on Electric and Magnetic Fields,2003 ,Aachen , Germany

14.    M.Mirzayee, M.Mirsalim, S.E.Abdollahi, "Analytical Modeling of a Disk Induction Motor Using Maple Software ", published in proceeding of XII International Symposium on Theoretical Electrical Eng. proc., Poland, 2003. ISTET2003.

 

 
Supervised Dissertations and Theses
  • Design of a Hybrid Excited Flux Switching Motor for Electric Vehicle Application (S. M. Kazemi)
 
Research Projects
  • Design and Prototyping of a Disk Induction Motor (Amirkabir University of Technology)
 
Back to top