Salman Nourouzi

Salman Nourouzi

سلمان نوروزي
Email:  s-nourouzi[at]nit.ac.ir
Website:  http://mec.nit.ac.ir/?nourouzi

Associate Professor

B.Sc: Metallurgy&Materials Engineering, IsFahan University of Technology, Iran, 1988

M.Sc: Metallurgy&Materials Engineering, Tabiat Modarres, Iran, 1995

Ph.D: Surface Engineering (Thermal Spray Coating), Limoges University, France, 2004

 
Qualifications
 
Research Interests

1-Thermal Spray Coating

2- Semi-Solid Forming

3- Solid State Welding

4- Heat Treatment of Metalic Alloys

 

 
Honors and Awards
University Distinguished Researcher, Babol University of Technology
 
Previous and Present Positions
 
Professional Membership

2010-2014 Dean of School of Mech. Eng. of Babol University of Technology

2008-2009 Research Director of Babol University of Technology

2007-2008 Education Deputy of School of Mech. Eng. of Babol University of Techology

1997-1999 Financial and Administrative Deputy of Eng. Faculty of Mazandaran University

1996-1997 Director of Industrial Collaboration Mazandaran University

 
Teaching Experiences

  BSc:

  • Heat Treatment
  • Metals Casting
  • Materials Science & Engineering
  • Manufacuring Methodes
  • Industrial Metal Alloys and Manufacturing Technology
  • Physical Properties I, II

 

MSc :

  • Metal Coating
  • Advanced Welding Technology
  • Advanced surface Engineering
  • Advanced Surface Engineering

 

PhD :

  • Advanced  Materials Selection
  • Metallurgical Phenomenon in Manufacuring Eng.
 
Publications

 

Journal Papers

   

[45] A.H. Lotfi, S. Nourouzi, " Effect of welding parameters on microstructure, thermal and mechanical properties of friction-stir welded joints of AA7075-T6 aluminum alloy ",  Metallurgical and Materials

Transactions A, Vol. 45A, No. 4, 2014, pp2792-2807

[44] A. Kolahdooz, S. Nourouzi, M. Bakhshi, S.J.Hosseinipour, " Investigation of the controlled atmosphere of semisolid metal processing of A356 aluminium alloy ",  Journal of Mechanical Science and Technology, Vol. 28, No. 10, 2014, pp4267-4274

[43] A. Kolahdooz, S. Nourouzi, M. Bakhshi, S.J.Hosseinipour, "Experimental investigation of thixoforging parameters effects on the microstructure and mechanical properties of the helical gearbox cap",  Journal of Mechanical Science and Technology, Vol. 28, No. 10, 2014, pp4257-4265

[42] S. Nourouzi, M. Jalali Azizpour, H.R. Salimijazi, "Parametric study of residual stresses in HVOF thermally sprayed WC–12Co coatings", Materials and Manufacturing Processes, Vol. 29, No. 9, 2014, pp1117-1125

[41] S. Nourouzi, A.H. Lotfi, "Predictions of the optimized friction stir welding process parameters for joining AA7075-T6 aluminum alloy using preheating system",  The International Journal of

Advanced Manufacturing Technology, Vol. 72, No. 8, 2014, pp1717-1737

[40] M. Habibnia, M. Shakeri, S. Nourouzi, M. K. Besharati Givi, “Microstructural and mechanical properties of friction stir welded 5050 Al alloy and 304 stainless steel plates", The International Journal of

Advanced Manufacturing Technology, Vol. 14, No. 4, 2014, pp81-90

[39] A.H. Lotfi, S. Nourouzi, " The microstructural and mechanical properties of friction stir welded 5050-T6 Al alloy by the use of design of experiment ",  Modares Mechanical Engineering Journal(in Persian), Vol. 14, No. 3, 2014, pp17-26

[38] S. Nourouzi,_M. shakeri, M. Habibnia, "Effect of friction stir welding parameters on microstructure and mechanical properties of dissimilar joint Al alloy to stainless steel",  Aerospace Mechanics Journal (in Persian), Vol. 11, No. 1, 2014, pp69-75

[37] S. S. Hosseini,_S. Nourouzi, S. J. Hosseinipour, "Simulation of semi-solid casting process on cooling slope surface",  Aerospace Mechanics Journal (in Persian), Vol. 11, No. 1, 2014, pp11-20

[36] M. Jalali Azizpoura,, S. Nourouzi, H. Salimijazi, D. Sajedipour, H. Mohammadi majd, F. Saadi, " Experimental and numerical study of residual stress in the WC-12Co HVOF sprayed coatings ",  Journal of Advanced Materials and Processing, Vol. 1, No. 4, 2013, pp3-14

[35] S. Nourouzi, H. Baseri, A. Kolahdooz, S.M. Ghavamodini, "Optimization of semi-solid processing of 357 aluminum alloy",  Journal of Mechanical Science and Technology, Vol. 27, No. 12, 2013, pp3869-3874

[34] M. Jalali Azizpour, S. Nourouzi, "Evaluation of surface residual stresses in HVOF sprayed WC-12Co coatings by XRD and ED-hole drilling",  Journal of Mechanical Science and Technology, Vol. 27, No. 9, 2013, pp2709-2713

[33] S. Nourouzi, M. Bakhshi, A. Kolahdooz, S.J. Hosseinipour, "Effect of  temperature on the Microstructure of semi-solid casting in cooling slope method",  Aerospace Mechanics Journal (in Persian), Vol. 9, No. 3, 2013, pp55-63

[32] S. Nourouzi, M. Shakeri, N. Karimi, "Comparison of microstructure and mechanical properties of aluminum alloy joining by friction stir welding in air and underwater",Modares Mechanical Engineering (in Persian), Vol. 13, No. 3, 2013, pp146-152

[31] F. Zhalehfar, S.J. Hosseinipour, S. Nourouzi, A.H. Gorji, "A different approach for considering the effect of non-proportional loading path on the forming limit diagram of AA5083", Materials and Design, 20(2013), pp165-173

[30] M. JalaliAzizpour, S. Nourouzi, H.R Salimijazi, R.Moharami, "Evaluation of through thickness residual stress in WC-Co coatings using electro discharge hole drilling method", Iranian Journal of Surface Science & Engineering (in Persian), March 2013, pp45-53

[29] S. Nourouzi, M. Shakeri, M. Habibnia, "Frictions stir welding of dissimilar metal Al 5050 Aluminum alloy to AISI304 stainless steel", Modares Mechanical Engineering (in Persian), Vol. 12, March 2013, pp 95-103

[28] M. JalaliAzizpour, S. Nourouzi, H.R Salimi, "Evalution the effect of process parameters on velocity of HVOF thermally sprayed WC-Co particles", Iranian Journal of Surface Science & Engineering (in Persian), November 2012, pp59-64

[27]M. Botkan, S. nourouzi, A. kolahdooz, "Effect of isothermal stirring parameters on microstructure of Al-A356 alloy", Steel research International, September 2012, pp 775-778

[26] M. Botkan, S. Nourouzi, S. J. Hosseinipour, A. kolahdooz, "Effect of isothermal stirring parameters on microstructure of Al-A356 alloy" Steel research International, September 2012 ,pp 779-782

[25] N. Karimi, S. Nourouzi, M. Shakeri, M. Habibnia, A. Dehghani, Underwater FSW process on the joining of 5050 aluminum alloy", Steel research International, September 2012 ,pp 623-626

[24] N. Karimi, M.Shakeri, M. Habibnia,  S.Nourouzi, "Joining of 1100 aluminum alloy to AISI 1045 carbon steel by friction stir welding", Applied Mechanics &Materials, Vol. 152-154, 2012,pp418-423

[23] N. Karimi, S. Nourouzi, M. Shakeri, M. Habibnia, A. Dehghani, "Effect of tool material and offset on friction stir welding of Al alloy to carbon steel", Advance Materials Research, Vol. 445, 2012,pp747-752

[22] M. Habibnia,  M. Shakeri, S. Nourouzi, N. Karimi, "Effect of tool rotation speed and feed rate on friction stir welding of 1100 aluminum alloy to carbon steel", Advance Materials Research, Vol. 445, 2012,pp741-746

[21] S. Nourouzi, A. Kolahdooz and M. Botkan, "Behavior of A356 alloy in semi-solid state produced by mechanical stirring", Advance Materials Research, Vol. 402, 2012,pp331-336

[20] S. Nourouzi, S.M. Ghavamodini, H. Baseri, A. Kolahdooz, M.Botkan, "Microstructure evolution of A356 aluminum alloy produced by cooling slope method", Advance Materials Research, Vol. 402, 2012,pp272-276

[19] A.H. Gorji, H. Alavi-hashemi , M. Bakhshi-Jooybari, S. Nourouzi, S. J.Hosseinipour, " ivestigatin of hydrodynamic deep drawing for conicai-cylindrical cups", Advance Manufacturing Technol, Vol. 56, 2011,915-927

[18] S. Nourouzi, A. Gorji, M. Bakhshi-Jooybari, S.J.Hosseinipour,G.M. Alinejad, "The effect of bending radius on thickness distribution in hydroforming of conical-cylindrical cups ", Advance Materials Research, Vol. 284-286, 2011,pp1362-1362

[17]S. Nourouzi, A.R Yaghoubi, M. Bakhshi-Jooybari, A. Gorji, "Experimental study of drawing load curves in forming conical parts by hydroforming and conventional deep drawing processes", Advance Materials Research, Vol. 291-294, 2011, pp556-560

[16] A. Gorji, M. Bakhshi-Jooybari, S. Nourouzi , S. J. Hosseinipour and G.M. Alinejad, "The effect of process parameters on thickness distribution in hydroforming of conical-cylindrical cups", Key Engineering Materials,  Vol. 473, 2011, pp176-181 

[15] A. Gorji, A. R. Yaghobi, M. Bakhshi-Jooybari ,S.Nourouzi, " Thickness distribution in conical parts formed by hydroforming and conventional multistage deep drawing processes", Advance Materials Research, Vol. 189-193, 2011,  pp2884-2887

[14] A. Gorji M. Bakhshi-Jooybari , S.Nourouzi, S.J. Hosseinipour, G.M. Alinejad  "Finite element simulation and experimental study of the effect of cone parameter on thickness distribution in hydroforming of conical-cylanderical cups", Advance Materials Research,  Vol. 189-193, 2011,  pp2634-2637

[13] S. Nourouzi, M.M. kykha,”Investigation on effect of die temperature and reheating treatment on microstructure of A360 aluminum alloy semi-solid forming", Journal of Engineering Materials (in Persian), Vol. 2, 2010, pp347-341

[12] A.H. Gorji, H. Alavi-hashemi , M. Bakhshi-Jooybari, G. M. Alinejad, S. Nourouzi , ”Development of hydrodynamic deep drawing assisted by radial pressure for conical-cylindrical Parts", Steel research International , Vol. 81, 2010 ,pp 628-631

[11] M. Elyasi, P. Zoghipour, M. Bakhshi-Jooybari A.H. Gorji, S. J. Hosseinipour, S. Nourouzi , "A new hydroforming die design for improvement of die corner filling of conical stepped tubes", Steel research International, Vol. 81, 2010 ,pp 516-519

[10] A. Kamarei, S. Nourouzi, M. Bakhshi and A. H. Gorji, "An investigation on the effect of mechanical stirring parameters on mechanical properties of A360 aluminum alloy in semi-solid forming", Journal of Tehran Uni. Engineering Faculty(in Persian), Vol. 43, 2009, pp751-759

[9] M. Bakhshi-Jooybari , M. Elyasi A. Gorji, , G. Alinejad, S.J. Hosseinipour and S. Nourouzi, , "Investigation of die corner filling in hydroforming of cylindrical stepped tubes using finite element simulation and experiment", Key Engineering Materials, Vol. 410-411, 2009 ,pp 335-343

[8] M. Hosseinzadeh, H. Mostajeran, M. Bakhshi-jooybari, A.H. Gorji, S. Nourouzi. S.J. Hosseinipour , "Novel combined standard hydromechanical sheet hydroforming process", IMehE, Part B. Journal of Engineering Manufacturing, Vol. 224 , 2009 ,pp 447-456

[7] M. Elyasi, M. Bakhshi, A Gorji,J. Hosseinipour and S. Nourouzi , "New die design for improvement of die corner filling in hydroforming of cylindrical stepped tubes ", IMechE, Part B. Journal of Engineering Manufacture, Vol. 223 , 2009 ,pp 821-827

[6] M. Hossienzadeh, H. Mostajeran, A.H. Gorji, M. Bakhshi, S. Nourouzi, S.J. Hossenipour, "Experimental and numerical investigation of the effective parameters in a new sheet hydroforming method", Aerospace Mechanics Journal (in Persian), 2009, pp 55-68

[5] M. Elyasi, M. Bakhshi-Jooybari, A.H. Gorji, S. Nourouzi , "Numerical and experimental investigation on forming metallic bellows in closed and open die hydroforming" , Steel research International, Vol. 79 , 2008 ,pp 148-154

[4] S. Nourouzi, "The effect of gas atomizing on stainless steel coating properties in arc-wire coating process", Journal of Mechanical Engineering of Mazandaran University (in Persian),  Vol. 3, 2007, pp 1-7

[3] S. Nourouzi, "The Using of Secondary Gas Atomizing and Cored Wire for Improvement of Coating Properties in Wire-arc Spray Process", Journal of Mechanical Engineering of Mazandaran University (in Persian), Vol.3, 2006, pp 1-7

[2] S. Nourouzi, A. Vardelle , " Effect of nozzle diameter and atomizing air pressure on characteristics of particles on vol. in wire arc spraying" , Iranian Journal of Materials Sciences and Engineering , Vol. 2 , 2005, pp 26-34

[1] P. Ctibor, S. Nourouzi, "Structural analysis of plasma and wire arc sprayed stainless steel coatigs", Journal of Actatechn. CSAV 49, Prague, Czech Republic, 2004, pp 411-422

 

 

 

Conference Papers

[52] N. Karimi, S. Nourouzi, M. Shakeri, M. Habibnia, A. Dehghani," Effect of tool Material and Offset on Friction Stir Welding of Al Alloy to Carbon Steels", Advances in Materials and Processing Technologies, Istanbul, Turkey , July 2011

[51] M. Habibnia, M. Shakeri,  S. Nourouzi, N. Karimi, " Effect of Tool Rotation Speed and Feed Rate on Friction Stir Welding of 1100 Aluminum Alloy to Carbon Steel", Advances in Materials and Processing Technologies, Istanbul, Turkey , July 2011

[50] M. Dashti, S.J. Hosseinipour, S. Nourouzi and A.H. Gorji, "Effect of Repetitive Corrugation and Straightening on the Mechanical Properties and Microstructure of Commercial Al-5083 Alloy" , Advances in Materials and Processing Technologies, Istanbul, Turkey , July 2011

[49] S.M. Ghavamodini, S. Nourouzi, H. Baseri , A. Kolahdooz, S. Kaboli, M. Botkan, "A Study of the Effects of Semi-solid Casting Parameters on the Microstructure and Hardness of Al-A356 Alloy" Advances in Materials and Processing Technologies, Istanbul, Turkey , July 2011

[48] B. Zareh, M. Sepehrizadeh, A. Gorji, M. Bakhshi-jooybari, S. Nourouzi, "An Investigation into the Forming of Hemispherical Cup Using Hydrodynamic Deep Drawing Assisted by Radial Pressure" Advances in Materials and Processing Technologies, Istanbul, Turkey , July 2011

[47] M. Jalali Azizpour, S.Nourouzi, D.Sajedipour, H.Mohammadi majd, A. Hosseini, H. Talebi, A. Ghamari, " Bond Strength in Thermally Sprayed Gas Turbine Shafts", International Conference on Mechanical, Industrial and Manufacturing Engineering, Amsterdam, Netherlands, July 2011

[46] M. Jalali Azizpour, S.Nourouzi, D.Sajedipour, H.Mohammadi majd, "Residual stresses in Thermally Sprayed Gas Turbine Components", International Conference on Mechanical, Industrial and Manufacturing Engineering, Amsterdam, Netherlands, July 2011

[45] M. Jalali Azizpour, S.Nourouzi, H.Mohammadi majd,  D.Sajedipour, R.Sajedipour Sadr, M. Derakhshan Mehr, S.A.Shoabi, R. Mohammadi, " Development Trend in Investigation of Residual Stresses in WC-Co Coating by HVOF Thermal Spraying" International Conference on Mechanical, Industrial and Manufacturing Engineering, Amsterdam, Netherlands, July 2011

[44] F. Jalehfar S.J. Hosseini, S. Nourouzi, S.M. Hosseini, A.H. Gorji," Study of Nonlinear Loading Effect on FLD Aluminum Alloy 5083", The 4the Iranian Conference on Metallurgical Engineering Society(in Persian), Tehran, Iran, November 2010

[43] F. Jalehfar S.J. Hosseini, S. Nourouzi, S.M. Hosseini, A.H. Gorgi, " The Effect of Axial Pre-strain on FLD Aluminum Alloy 5083" The 4the Iranian Conference on Metallurgical Engineering Society(in Persian) , Tehran, Iran, November 2010

[42] A. Kamarei , S. Nourouzi, M. Bakhshi , A. Gorji, "An Investigation on Semi-solid Forming of A360 Aluminum Alloy by Mechanical Stirring", Advances in Materials and Processing Technologies, Paris, France , October 2010

[41] S.M. Hosseini, S. J. Hosseinipour, S. Nourouzi,  A. Gorji, "An Investigation into the Effect of Aging on the Forming Limit Diagram of 6063 Aluminum Alloy" Advances in Materials and Processing Technologies, Paris, France , October 2010

[40] F. Zhalefar S. J. Hosseinipour, S. Nourouzi,  A. Gorji, " Effect of Equal Biaxial Pre-strain on Forming Limit Diagram of A 5083" Advances in Materials and Processing Technologies, Paris, France , October 2010

[39] A.R. Yaghoubi , M. Bakhshi-Jooybari, A. Gorjic and S. Nourouzi, " Comparison of Forming Conical Parts by Hydroforming and Conventional Deep Drawing Hydroforming and Conventional Deep Drawing Processes", Advances in Materials and Processing Technologies, Paris, France, October 2010

[38] M. Sepehrizadeha, A. Gorjib, B. Zarehc, M. Bakhshi-Jooybarid and S.Norouzi , "Experimental Study and Finite Element Simulation of the Effect of Cone Angle on Drawing Ratio and Thickness Distribution in Hydroforming of Conical-cylindrical Cups", Advances in Materials and Processing Technologies, Paris, France , October 2010

[37] A. Gorji M. Bakhshi-Jooybari , S.Norouzi,  G. Mohamad-alinejad, " Forming of Conical Parts with Sharp Tip in Sheet Hydroforming process-cylindrical cups" Advances in Materials and Processing Technologies, Paris, France , October 2010

[36] S.M. Hosseini, S.J. Hosseini, S. Nourouzi, , A.H. Gorgi, " The Study of Formability and Mechanical properties of A6063 Aluminum Alloy after Age Hardening Treatment" The 4the Iranian Conference on Metallurgical Engineering Society (in Persian), Tehran, Iran, November 2010

[35] M. Sepehrizadeh, B. Zareh, A.H. Gorji, M. Bakhshi, S. Nourouzi , "Effect of Pressure Path and Punch Tip Radial on Thickness Distribution and Critical Areas in the Cone Shaped Parts Using Hydroforming Method" The 11th Iranian Conference on Manufacturing Eng. (in Persian), Tabriz, Iran , October 2010

[34] B. Zareh, M. Sepehrizadeh, A.H. Gorgi, M. Bakhshi, S. Nourouzi , "Finite Element Simulation and Experimental Study on Pressure Path of the Cup Shape of the Frontal Half Spherical Stone on Hydrodynamic Deep Drawing Process with Radial Pressure" The 11th Iranian Conference on Manufacturing Eng. (in Persian), Tabriz, Iran, October 2010

 [33] A. Kolahdouz, S. Nourouzi, M. Bakhshi , " Study and Comparison the Semi-solid Forming Aluminum Alloy A360 Produced with Slop Cooling and Mechanical Stirring " The 11th Iranian Conference on Manufacturing Eng. (in Persian), Tabriz, Iran, October 2010

[32] A. Kolahdouz, S. Nourouzi, M. Bakhshi, A.H. Gorji , "Effect of Reheating Treatment on Casting Aluminum alloy Properties Produced in Slop Cooling Method" The 11th Iranian Conference on Manufacturing Eng. (in Persian), Tabriz, Iran, October 2010

[31] S. M. Hosseini, S.J. Hosseini, F. Jalehfar, S. Nourouzi, A.H. Gorji, "Experimental Study of Edge Hardening Heat Treatment on Anisotropy behavior of sheet aluminum alloy AA6063" The 11th Iranian Conference on Manufacturing Eng. (in Persian), Tabriz, Iran, October 2010

[30] B. Zareh, M. Sepehrizadeh, A.H. Gorgi, M. Bakhshi, S. Nourouzi, "Experimental Study of Effective Parameters in Hydrodynamic Deep Drawing with Radial Pressure" The 11th Iranian Conference on Manufacturing Eng. (in Persian), Tabriz, Iran, October 2010

[29] S.M. Hosseini, S.J. Hosseini, F. Jalehfar S. Nourouzi, A.H. Gorgi, "Experimental Study of Edge Hardening Heat Treatment on FLD Aluminum Alloy AA6063" The 11th Iranian Conference on Manufacturing Eng. (in Persian), Tabriz, Iran, October 2010

[28] M. Hossienzadeh, H. Mostajeran, M. Bakhshi, S. Nourouzi, S.J. Hosseini, A.H. Gorji , "Investigation of Forming Mechanism in New Method Combined Sheet Standard Hydroforming-Hydro-mechanical" The 10th Iranian Conference on Manufacturing Eng. (in Persian), Babol, Iran, March 2010

[27] A. Kamerie, A. Koladoze, S. Nourouzi M. Bakhshi, A.H. Gorgi, "Effect of Mold Temperature and Reheating Treatment on Microstructure Aluminum alloy A360 with Mechanical Stirring" The 10th Iranian Conference on Manufacturing Eng. (in Persian), Babol, Iran, March 2010

[26] M. Jalali, S. Nourouzi, H. Mohammadi, A. Hosseini , "Reconstruction the High Cycle Axles in Gas Compressor Using Thermal Spraying HVOF" The 10th Iranian Conference on Manufacturing Eng. (in Persian), Babol, Iran, March 2010

[25] S.T. Momeni , S.J. Hosseinipour, S. Nourouzi, A.H. Gorji , "Experimental Investigation of Bimetallic Tubes"  Advances in Materials and Processing Technologies, Kuala Lumpur, Malaysia , October 2009

[24] H. Mostajeran, M. Hosseinzade, M. Bakhshi, A. Gorji, S. Nourouzi; S. J. Hosseinipour , "Experimental and Numerical Investigation of the Effect of Process Parameters in a New Sheet Hydroforming Method" Advances in Materials and Processing Technologies, Kuala Lumpur, Malaysia , October 2009

[23] S.T Momeni, S.J. Hosseinipour, S. Nourouzi, A.H. Gorji , "Experimental Investigation of the Forward Extrusion of Bimetallic Tubes " The 9th Iranian Conference on Manufacturing Eng. (in Persian), Birjand, Iran , March 2009

[22] H. Kalantary, S.J. Hosseinipoo, S. Nourouzi, A.H. Gorji , "Experimental Investigation of Effective Parameters on Equal Channel Angular Pressing of Aluminum Alloy 6063 " The 9th Iranian Conference on Manufacturing Eng. (in Persian), Birjand Iran , March 2009

[21] A. Kamerie, M.M. Kykha, S. Nourouzi , "A Method for Controlling of Shear Stress Rate in Semi-solid Metals Process" The 9th Iranian Conference on Manufacturing Eng. (in Persian), Birjand Iran , March 2009

[20] H. Towsyfyan, S.Nourouzi, S.S.Saharkhiz , "Ultrasonic Inspection of Train Axle Using Phased" The 9th Iranian Conference on Manufacturing Eng. (in Persian), Birjand, Iran , March 2009

[19] O. Ebrahimi, S.J. Hosseinipour, M. Bakhshi, S. Nourouzi, "Simulation and Microstructural Modeling of Equal Channel Angular Pressing" The 9th Iranian Conference on Manufacturing Eng. (in Persian), Birjand, Iran, March 2009

[18] J. Khoshnazar, S. Nourouzi, A. Ostevari, "Investigation of Indium Pressure Bonding Quality Dependence on Pressure and Temperature" The 2th National Conf. on Manufacturing Eng. (in Persian), Isfahan, Iran, October 2008

[17] J. Khoshnazar, S. Nourouzi, A. Ostevari, "A Review on Cold Welding Effective Parameters", The 2th National Conf. on Manufacturing Eng. (in Persian), Isfahan, Iran, October 2008

[16] M.M. Kykha, S. Nourouzi , "The Influence of angle and Length of Slope Plate on Properties of Cast Aluminum Alloys In Semi-solid Forming State" , The 2th National Conf. on Manufacturing Eng.(in Persian), Isfahan, Iran , October 2008

[15] H. Towsyfyan, S.S. Aharkhiz, S. Nourouzi , "Investigating the Role of Non-Destructive Testing In Quality Control of Wagon Axle in Iran" , 2th International Conf. Technical Inspection and NDT(in Persian), Tehran Iran , October 2008

[14] H. Towsyfyan, S.S. Aharkhiz, S. Nourouzi , "A Review of the Development and Evolution of Ultrasonic Testing in Detecting Defects and Discontinuities of Wagon Axle" , 2th International Conf. Technical Inspection and NDT(in Persian), Tehran Iran , October 2008

[13] M. Elyasi., M. Bakhshi, A. Gorji, S. Nourouzi, G. Alinejhad , "Numerical and Experimental Investigation on Forging Metallic Bellows in Closed and Open Die Hydroforging" , Poland , September 2008

[12] O. Ebrahimi, S.J. Hosseinipou, M. Bakhshi, S. Nourouzi, "Investigation and Simulation of Equal Channel Angular Pressing", 2nd International Congress on Manufacturing Engineering(in Persian), Tehran, Iran, December 2007

[11] O. Ebrahimi., S.J. Hosseinipour, M. Bakhshi, S. Nourouzi , "Extrusion Process in Equal Channel Angular Pressing, Simulation and Visitation of Path type influent in Strain and its homogeneity", 2th Tehran International Con on Manufacturing Eng. (in Persian), Tehran, Iran , December 2007

[10] M. Sabkrouh, S. Nourouzi, S.J. Hosseinpoor, "Inspection based Risk and Corrosion Roll in Risk Determination of Pipeline", 1st International Conference on Technical Inspection and NDT(in Persian), Tehran, Iran, October 2007

[9] M. Sabkrouh, S. Nourouzi, S.J. Hosseinpoor , "Defect Appearance Probability and Using the NDT tests Suitable for vessels and Pipes in Petrochemical Industries " , 1st International Conference on Technical Inspection and NDT(in Persian), Tehran, Iran, October 2007

[8] M. Sabkrouh, S. Nourouzi, S.J. Hosseinpoor , "Phased Array Technology" , 1st International Conference on Technical Inspection and NDT(in Persian), Tehran, Iran , October 2007

[7] M. Sabkrouh, S. Nourouzi, S.J. Hosseinpoor , "The Effect of Fluid Speed and Time on Pipeline Welding" , 1st Iranian Pipe & Pipeline Conference(in Persian), Tehran, Iran , July 2007

[6] M. Sabkrouh, S. Nourouzi, S.J. Hosseinpoor , "Friction-fusion in Welding, the New Junction Procedure in Pipelines Montage and Installation" , 1st Iranian Pipe & Pipeline Conference, (in Persian), Tehran, Iran , July 2007

[5] M. Sabkrouh, S.Nourouzi, S.J. Hosseinpoor , "Statistical and Economical Survey of Welding Defects in Petrochemical Industries Pipelines and Necessity of more Attention International Welding Engineering" , 1st Iranian Pipe & Pipeline Conference(in Persian), Tehran, Iran , July 2007

[4] M. Sabkrouh, S. Nourouzi, S.J Hosseinpoor , "Effect of Time and Fluid Corrosive Speed on Corrosion Rate and Mechanical Strength of Plain and Stainless Steels in Pipelines Welding" , 8th Iranian Conference in Welding & Inspection(in Persian), Tehran, Iran , May 2007

[3S. Nourouzi , "Improving of Thermal Coating Properties by Using of Novel Technique in Wire-arc Spraying" , 15th International Conf. on Mechanical Eng, Amirkabir University(in Persian),Tehran, Iran , May 2007

[2S. Nourouzi , "The Effect of Liquid Droplet Parameters on Stainless Steel Coating Properties in Wire-arc Spraying" , 9the Congress of the Iranian Metallurgical Society(in Persian), Shiraz University, Iran , November 2005

[1] P. Rohan, S. Bawar,J.C Legoux, C. Moreau BouchervillCanada and P. Ctibor, S. Nourouzi, C. Leniniven Limoges/France , "Deposition of Amorphous Metallic Coatings by Thermal Spraying" , International Thermal Spray Conference, Osaka, Japan , May 2004

 

 
Supervised Dissertations and Theses

MSc& PhD Supervision Theses in

Manufacuring Engineering & Materials Engineering

 
Research Projects
  • Materials for Engineering (inpress)
  • High Temperature Coating (inpress)
 
Back to top