Prof. Mofid Gorji-Bandpy

Prof. Mofid Gorji-Bandpy

پروفسور مفيد گرجی بندپی
Email:  gorji[at]nit.ac.ir
Website:  http://en.nit.ac.ir/departments/mec/faculty_members.aspx

Professor

Contact

 

           Correspondence address:               Faculty of Mechanical Engineering,

                                                        Noshirvani University of Technology,

                                                        P.O. Box 484, Babol, Iran.

 

Phone Number:                           +98, 11, 332 240 48

                                                 

Fax:                                              +98, 11, 332 34 201

 

Email:                                            gorji@nit.ac.ir

                                                 

Countries visited

 

Britain, Canada, Germany, Switzerland, The Netherlands, India, China, Russia, Pakistan and more than  30 different countries from Asia and Europe.

 

 
 
Qualifications

 Primary and Secondary School

 

1960- 1966                  Primary School, Ministry of Education and Culture, Iran, (First class)    

      

1966-1971                   High School, Ministry of Education and Culture, Iran, (First class) 

 

Undergraduate

 

1972-1976                   BSc, Faculty of Engineering, Department of Mechanical Engineering, University of Tehran, Iran(First Grade)

 

Postgraduate

 

1976-1978                   MSc., Faculty of Engineering, Department of Fluid Mechanics and Heat Transfer, University of Tehran, Iran (First Grade)

            

1987-1991                   PhD, School of Engineering, Division of Mechanical Engineering, University of Wales College of Cardiff (UWCC), Cardiff, U.K.(Distinguished Grade)

                                   
 
Research Interests

1. Fluid Mechanics,Turbomachinery and all of the Hydro Engineering subjects

 

2. Renewable Energy (wind, water, solar and tidal energy)


3. History of Science (ancient to modern era)

 

4. Water Distribution Networks

 

5. Mechanics and Thermodynamics of Propulsion Systems.

 

6. Internal Combustion Chamber

 
Honors and Awards
Water & Power Ministry(2002-2004) "Analysis of pipe breaks in water distribution systems for Three Cities in Mazandaran Province", Chief Consultant

His book entitled "Engineering Fluid Mechanics" was awarded as The Best scientific book of the Year 1998, University of Tehran

His book entitled "Turbo machinery" was awarded as The Best scientific book of the Year 2006, University of Amirkabir

In 2012, he was nominated as a national scientific fellow (Eternal Figure) for his upstanding and permanent contributions in different fields of engineering.
 
Previous and Present Positions

Full time Professor, Department of Mechanical Engineering, Noshirvani University of Technology, Babol, IRAN (Since 1979).

Visiting Professor,Department of Mechanical and Industrial Engineering ,University of Toronto,Canada, ( Since 2004).

Coordinate Supervisor, University of Guildford, Surrey, U.K.,(Since 1997).

 
Professional Membership

             1983- Present              Mechanical Department Committee

 

             1993- Present              Educational and Research Advisor to the Chancellor of the University of Mazandaran

 

 1992- Present              Member of the Mazandaran University Council

 

 1995- Present              Member of the joint committee (Mazadaran University and Ministry of Water and Power of Iran)

 

 1993-1997                   Ministry of Higher Education and Culture representative in Scholarship Committee

 

 1993-1998                   Head of Micro Hydroelectric Power Research Center in Mazandaran, Iran

 

 1992- 2000                  Head of Caspian Sea water level Rising and Intrusion Research Center

  

 1999- Present               Member of the Chartered Institution of Water and Waste water Management (CIWWM)

 

 1996- Present               Secretary to the Board of Postgraduate Studies

 

 1991- Present               Program Director, M.Sc. in Water and Environmental Engineering

 

  2000-2004                    Director of Int. Relation Affairs, University of Mazandaran

 

             1991-present                 Chairman of the Examination group, Department of Mechanical Engineering, Mazandaran

 

 1992- Present                External Examiner for the postgraduate exam

 

 1991- Present               Invited as a visiting professor, Examiner and Guest Lecturer to

                                    various Universities in Iran

 

 2000-2001                    Collaborative work with Water Authority of Mazandaran      

                                    (WAM), Iran

                                                                                                                                    

 

 2000-present                 Member of the Local Organizing Committee of the 2000

                                    “International Conference on mini Hydroelectric Power Station

                                     in rural regions”, held at Ministry of Jehad, Sari, Iran.

 

 
Teaching Experiences

1) Education

 

1979-1991                   Head of Mechanical Department,Facualty of  Engineering,

                                        Noshirvani University of Technology, Babol, Iran.

1981-1983                   Dean of Faculty of Engineering, Noshirvani University of Technology,

                                        Babol, Iran.

1983-1985                   Deputy of Chancelor to the Finance and Admimistrative

affairs,University of Mazandaran.

             1982-Present               Postgraduate Students Research Supervisor

             2001-2004                      Editor in Chief, Mazandaran Journal of Science and Engineering

             2009-present                  Editorial Manager, Iranica Journal of Energy and Environment            

                                                    (Noshirvani University of Technology), www.idosi.org/ijee/ijee.htm.

 

 

2) Teaching Duties;

 

++At the undergraduate level:

· Fluid Mechanics I and II

· Turbomachinery

· City Water Distribution Design

 

             ++At the postgraduate level:

   

· Advanced Fluid Mechanics

· Mechanics and Thermodynamics of  Propulsion

                        · Supervisor of M.Sc. and Ph.D. students

                       

 

Review Activities (Until December 2016):

1.    Transport in Porous Media (80);

2.  Flow Measurement and Instrumentation (52);

3.  OMICS Group - Engineering Journals (18);

4.  Energy (13);

5.  Experimental Thermal and Fluid Science (11);

            6.    Journal of Fluid Flow, Heat and Mass Transfer  (6);

7.     International Journal of Thermal Sciences (6);

8.     Journal of Heat and Mass Transfer Research (4);

9.     Alexandria Engineering Journal (3);

10.   Physica A: Statistical Mechanics and its Applications (2);

11.   Entropy (An Open Access Journal from MDPI) (1);

12. Engineering Science and Technology: an International Journal (1);

13.  Journal of Thermophysics and Heat Transfer (2);

14. International Journal of Heat and Mass Transfer (2);

15.  Journal of Modeling in Engineering (2);

16.   Part E: Journal of Process Mechanical Engineering (2);

17.   International Journal for Numerical Methods in Biomedical Engineering (2);

18.   Journal of Zhejiang University-SCIENCE A (1);

19.  Applied Soft Computing (1);

20.   Artificial Intelligence Review (1);

21.   International Journal of Modelling and Simulation (1);

22.  International Journal of Exergy (1);

23.  International Journal of Numerical Methods for Heat and Fluid Flow (1);

24. Karbala International Journal of Modern Science (1);

25.   Chemical & Process Engineering (1);

26. Journal of Testing and Evaluation (1);

27.  Frontiers in Heat and Mass Transfer(1);

28. Journal of the Taiwan Institute of Chemical Engineers(1);

29.  Ain Shams Engineering Journal (1);

30. International Journal of Refrigeration (1);

31.  International Journal of Maritime Technology(1)

 
Publications

1) Publications

 

1. Text-Book on "Water Distribution Systems for Engineers", Published by University of Mazandaran, (1984).

 

2. Text-Book on "Engineering Fluid Mechanics", Published by University of Mazandaran, (1998). This book was awarded as "The Best Scientific Book of the Year 1998, University of Tehran.

 

3.  Text-Book on "Turbomachinary", Published by University of Mazandaran,(2002). This book  

     was awarded as "The Best Scientific Book of the Year 2006”,University of Amirkabir,    Tehran.

 

4. Text-Book on "Turbomachinary, Second Edition", Published by Babol Noshirvani University of   Technology, (2011).

 

5. Text-Book on "Turbojet and Propulsion Systems", Published by Babol Noshirvani University of Technology, (2011).

 

6.   Text-Book on "Advanced Fluid Dynamics", Published by Babol Noshirvani University of Technology, (2011).

 

7.  Text-Book on "Thermodynamics, Interaction Studies-Solids, Liquids and Gases", Published by Intech, Croatia, www.intechopen.com, (chapter 9, Exergy the Potential Work).


 8.  Text-Book on "Magnetic field effects on natural convection heat transfer using LBM, Published by LAMBERT Academic Publishing .

http://www.amazon.com/Magnetic-effects-natural-convection-transfer/dp/3659628034

 

 

2) Scientific papers


 English scientific papers:


2017



211.Ehsan Sourtiji, Mofid Gorji-Bandpy .(2017) .
A numerical study of mixed convection flow and heat transfer inside a square cavity with inlet
and outlet ports is performed
http://thermalscience.vinca.rs/pdfs/papers-2017/TSCI130804001S


210. Tabassum, R., Mehmood, R., Pourmehran, O., Akbar, N. S., & Gorji-Bandpy, M. (2017). Impact of viscosity variation on oblique flow of Cu–H2O nanofluid. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 0954408917732759.
http://journals.sagepub.com/doi/abs/10.1177/0954408917732759


209. Yousefi, M., Pourmehran, O., Gorji-Bandpy, M., Inthavong, K., Yeo, L., & Tu, J. (2017). CFD simulation of aerosol delivery to a human lung via surface acoustic wave nebulization. Biomechanics and Modeling in Mechanobiology, 1-16.
https://link.springer.com/article/10.1007/s10237-017-0936-0


208. Iman Sohrabiasla, Mofid Gorji-Bandpay, Alireza Hajialimohammadib, Mostafa Agha Mirsalimc (2017). "Effect of open cell metal porous media on evolution of high pressure diesel fuel spray". Fuel, 206, 133–144.
http://www.sciencedirect.com/science/article/pii/S0016236117306981



207. Lohrasbi, S., Gorji-Bandpy, M., & Ganji, D. D. (2017). Thermal penetration depth enhancement in latent heat thermal energy storage system in the presence of heat pipe based on both charging and discharging processes. Energy Conversion and Management, 148, 646-667.
http://www.sciencedirect.com/science/article/pii/S0196890417305800



206. Mosayebidorcheh, S., & Gorji-Bandpy, M. (2017). Local and averaged-area analysis of steel slab heat transfer and phase change in continuous casting process. Applied Thermal Engineering, 118, 724-733.

http://www.sciencedirect.com/science/article/pii/S1359431116330538



205. Mirzababaei, S. N., Gorji, T. B., Baou, M., Gorji-Bandpy, M., & Fatouraee, N. (2017). Investigation of magnetic nanoparticle targeting in a simplified model of small vessel aneurysm. Journal of Magnetism and Magnetic Materials, 426, 126-131.
http://www.sciencedirect.com/science/article/pii/S0304885316329675

204. Lohrasbi, S., Miry, S.Z., Gorji-Bandpy, M. and Ganji, D.D., (2017). Performance enhancement of finned heat pipe assisted latent heat thermal energy storage system in the presence of nano-enhanced H 2 O as phase change material. International Journal of Hydrogen Energy.
http://www.sciencedirect.com/science/article/pii/S0360319917300666



2016


203. Asadian, H., Zaretabar, M., Ganji, D.D., Gorji-Bandpy, M. and Sohrabi, S., Investigation of Heat Transfer in Rectangular Porous Fins (\ mathrm {Si} _3\ mathrm {N} _4) with Temperature-Dependent Internal Heat Generation by Galerkin’s Method (GM) and Akbari-Ganji’s Method (AGM). International Journal of Applied and Computational Mathematics, pp.1-14.

202. Rahmani, Y., Bandpy, M.G. and Ganji, D.D., (2016). Numerical Study of Thermal Spreading Resistance in Body-Fitted Curvilinear Coordinates. International Journal of Applied and Computational Mathematics, pp.1-16.

201.Gorji-Bandpy, M. and Mozaffari, A., (2016). An economic and exergetic analysis of Damavand power plant: A case study in Iran. Energy Sources, Part B: Economics, Planning, and Policy, 11(6), pp.496-503.


200.Rahimi-Gorji, M., Gorji, T.B. and Gorji-Bandpy, M.,(2016). Details of regional particle deposition and airflow structures in a realistic model of human tracheobronchial airways: two-phase flow simulation. Computers in biology and medicine, 74, pp.1-17.


199.Lohrasbi, S., Bandpy, M.G. and Ganji, D.D., (2016). Response surface method optimization of V-shaped fin assisted latent heat thermal energy storage system during discharging process. Alexandria Engineering Journal, 55(3), pp.2065-2076

198. Rahmani, Y., Ganji, D.D. and Bandpy, M.G., (2016). Analytical study of thermal spreading resistance in curved-edge heat spreader. Applied Thermal Engineering, 104, pp.527-533.


197. M. Sheikholeslami , M. Gorji-Bandpy, D.D. Ganji, (2016), "Experimental and numerical analysis for effects of using conical ring on turbulent flow and heat transfer in a double pipe air to water heat exchanger." Applied Thermal Engineering, Vol. 100, pp 805-819.


196. M. Sheikholeslami , M. Gorji-Bandpy, D.D. Ganji, (2016), " Experimental study on turbulent flow and heat transfer in an air to water heat exchanger using perforated circular-ring." Experimental Thermal and Fluid Science, Vol. 70, pp 185-195.


195. M. Sheikholeslami , M. Gorji-Bandpy, D.D. Ganji, (2016), " Effect of discontinuos helical turbulators on heat transfer characteristic of double pipe water to air heat exchanger." Energy Conversion and Management, Vol. 118,  pp 75-87.


194. Pourmehran. O, Gorji. TB, Gorji-Bandpy. M, (2016), "Magnetic drug targeting through a realistic model of human tracheobronchial airways using computational fluid and particle dynamics."
US National Library of Medicine, Biomech Model Mechanobiol.
DOI: 10.1007/s10237-016-0768-3.


193. M. Jafaryar, R. Kamrani, M. Gorji-Bandpy, M. Hatami, D.D. Ganji, (2016), "Numerical optimization of the asymmetric blades mounted on a vertical axis cross-flow wind turbine." International Communications in Heat and Mass Transfer,  Vol. 70, January 2016, Pages 93–104.

2015



192.  S. Tavakoli, D. Domiri Ganji, M. Gorji, A. Rasekh, S. Naeejee, (2015) "Different camshaft profile analyses for natural gas engine performance and emission." Journal of the Brazilian Society of Mechanical Sciences and Engineering, Vol. 38, no. 2, pp 355-364.


191. M. Hatami, D.D. Ganji, M. Gorji-Bandpy, (2015), "Experimental and numerical analysis of the optimized finned-tube heat exchanger for OM314 diesel exhaust exergy recovery."  Energy Conversion and Management    Vol. 97, no. 97, pp. 26- 41.


190. Sajjad Sattari, Mahsa Jahani, Mofid Gorji-Bandpy, (2015), "Numerical Simulation of the Supersonic Flow over Forward-Facing Step in Micro Couette Flow Using Direct Simulation Monte Carlo Method."  International Journal of Advanced Design and Manufacturing Technology, Vol. 8, no. 3, pp. 43- 51.


189. Mehdi Miansari , M Gorji , D. D. Ganji , Kamel Hooman, (2015), " Comparison between continuum and porous continuum models in studying natural convection in porous cavity with random distribution of solid obstacles." International Journal of Numerical Methods for Heat & Fluid Flow, Vol. 25, no. 3, pp. 484 - 503.



188.   Tavana. M, Pourmehran. O, Khasraghei. A. A, Gorji-Bandpy. M, Alipour Sangarab, J, (2015), '' Numerical analysis of  fluid flow and heat transfer in micro-channels with various internal fins." International Journal of Artificial Intelligence and Mechatronics, Volume 3, Issue 4, ISSN 2320-5121.


187.   Sajjad Sattari, Mahsa Jahani, Mofid Gorji-Bandpy, (2015), " Application of different analytical methods to equation system of Bodewadt's fixed disc and rotating stream." New Trends in Mathematical Science, Volume 3,Issue 3,Pages 149-163.



186. M. Sheikholeslami, M. Gorji-Bandpy, D.D. Ganji, (2015), "Experimental study on turbulent flow and heat transfer in an air to water heat exchanger using perforated circular-ring."  Experimental Thermal and Fluid Science, vol. 70, pp. 185–195.



185. O. Pourmehran, M. Rahimi-Gorji, M. Gorji-Bandpy, M. Baou, (2015), " Comparison between the volumetric flow rate and pressure distribution for different kinds of sliding thrust bearing." Propulsion and Power Research, Volume 4, Issue 2, June 2015, Pages 84–90, DOI: 10.1016/j.jppr.2015.05.002 .



184. M. Sheikholeslami , M. Gorji-Bandpy, D.D. Ganji, (2015)," Fluid flow and heat transfer in an air-to-water double -pipe heat exchanger." The European Physical Journal Plus, vol. 130, no. 11, pp. 1-12,  DOI: 10.1140/epjp-/i2015-15225-y. Vol. 130, No. 11, PP. 1-12.



183.  Farkhadnia F, Gorji TB, Gorji-Bandpy M, (2015), " Airflow, transport and regional deposition of aerosol particles during chronic bronchitis of human central airways." The Official Journal of the Australasian College of Physical  Scientists and Engineers in Medicine, DOI: 10.1007/s13246-015-0394-x.


182. M. Sheikholeslami , M. Gorji-Bandpy, D.D. Ganji, (2015), " Experimental study of the influence of perforated circular-ring on pressure loss and heat transfer enhancement using sensitivity analysis." Journal of Applied Thermal Engineering, Volume 91, 5 December 2015, Pages 739–748. DOI: 10.1016/j.applthermaleng.2015.08.068.


181. O. Pourmehran,  M. Rahimi-Gorji, M. Gorji-Bandpy , T.B. Gorji, (2015), " Simulation of magnetic drug targeting through tracheobronchial airways in the presence of an external non-uniform magnetic field using Lagrangian magnetic particle tracking."Journal of Magnetism and Magnetic Materials, Volume 393, 1 November 2015, Pages: 380–393. DOI: 10.1016/j.jmmm.2015.05.086.


180. M. Hatami, D. D. Ganji, M. Gorji-Bandpy, (2015), " Investigations of fin geometry on heat exchanger performance by simulation and optimization methods for diesel exhaust application." Neural Computing and Applications pp:1-17, DOI: 10.1007/s00521-015-1973-1.


179. S. Tavakoli, D. Domiri Ganji, M. Gorji, A. Rasekh, S. Naeejee, (2015)," Different camshaft profile analyses for natural gas engine performance and emission." Journal of the Brazilian Society of Mechanical Sciences and Engineering, pp. 1-10, DOI: 10.1007/s40430-015-0317-5.



178. M. Rahimi-Gorji, , O. Pourmehran, M. Gorji-Bandpy, DD.Ganji, (2015), " An analytical investigation on unsteady motion of vertically falling spherical particles in non-Newtonian fluid by Collocation Method." Ain Shams Engineering Journal Volume6, Issue 2, June 2015, Pages 531–540.


177. Gorji , Tahereh B; Mozaffari , Ahmad; Gorji-Bandpy , Mofid; Fatouraee , Nasser " Estimating the deposition efficiency of micro-particles in human upper airway using computerized tomography imaging and bio-inspired evolvable extreme learning machine interpolator."


176.  M. Rahimi-Gorji, , O. Pourmehran, M. Gorji-Bandpy , T.B. Gorji, (2015), " CFD simulation of airflow behavior and particle transport and deposition in different breathing conditions through the realistic model of human airways."  Journal of Molecular Liquids 209, 121-133.


175.  M. Hatami,  M.D. Boot, D.D. Ganji, M. Gorji-Bandpy, (2015), '' Comparative study of different exhaust heat exchangers effect on the performance and exergy analysis of a diesel engine.'' Applied Thermal Engineering 90, 23-37.


174. Jafar Ghazanfarian, Roozbeh Saghatchi, Mofid Gorji-Bandpy, (2015), " Turbulent fluid-structure interaction of water-entry/exit of a rotating circular cylinder using SPH method.'' International Journal of Modern Physics C 26 (08), 1550088.

173.  R.A Alashti, M.Gorji-Bandpy, Ahmad Mozaffari, (2015), " Vector mutable smart bee algorithm for engineering optimisatio." International Journal of Computational Science and Engineering 10(1-2), 155-163.


172.      M.Sheikholeslami, M.Gorji-Bandpy, DD.Ganji " Review of heat transfer enhancement methods: Focus on passive methods using swirl flow devices." Renewable and Sustainable Energy Reviews, Volume 49, September 2015, Pages 444-469.


171.  M.Sheikholeslami, M.Gorji-Bandpy, HR Ashourinejad, (2015),  " Lattice Boltzmann Method for simulation of magnetic field effect on hydrothermal behavior of nanofluid in a cubic cavity." Physica A: Statistical Mechanics and its Applications 432, 58-70.


170.    M.Sheikholeslami, M. Jafaryar, F. Farkhadnia, M.Gorji-Bandpy, DD Ganji, (2015), " Investigation of turbulent flow and heat transfer in an air to water double-pipe heat exchanger."  Neural Computing and Applications 26(4), 941-947.


169. O. Pourmehran, M. Rahimi-Gorji, M. Gorji-Bandpy, D.D. Ganji, (2015), " Analytical investigation of squeezing unsteady nanofluid flow between parallel plates by LSM and CM ", Alexandria Engineering Journal,Volume 54, Issue 1, March 2015, Pages 17-26.


168. M. Hatami, D.D. Ganji, M. Gorji-Bandpy, (2015), '' Experimental investigations of diesel exhaust exergy recovery using delta winglet vortex generator heat exchanger", International Journal of Thermal Sciences, Volume 93, July 2015, Pages 52-63.


167. Mohsen Sheikholeslami, M. Hatami, M. Jafaryar, F. Farkhadnia, Davood Domiri Ganji, Mofid Gorji-Bandpy, (2015), "Thermal management of double-pipe air to water heat exchanger", Energy and Buildings, Volume 88, 1 February 2015, Pages 361-366, ISSN 0378-7788, http://dx.doi.org/10.1016/j.enbuild.2014.11.076.

http://www.sciencedirect.com/science/article/pii/S0378778814010457



166.    Mohsen Sheikholeslami, Mofid Gorji-Bandpy,"Kuppalapalle Vajravelu,(2015)," Lattice Boltzmann simulation of magnetohydrodynamic natural convection heat transfer of Al2O3–water nanofluid in a horizontal cylindrical enclosure with an inner triangular cylinder", International Journal of Heat and Mass Transfer, Volume 80, January 2015, Pages 16-25, ISSN 0017-9310, http://dx.doi.org/10.1016/j.ijheatmasstransfer.2014.08.090.

http://www.sciencedirect.com/science/article/pii/S0017931014007881

165. M. Hatami, D.D. Ganji, M. Gorji-Bandpy, (2015), "Experimental and thermodynamical analyses of the diesel exhaust vortex generator heat exchanger for optimizing its operating condition", Applied Thermal Engineering, Volume 75, 22 January 2015, Pages 580-591, ISSN 1359-4311, http://dx.doi.org/10.1016/j.applthermaleng.2014.09.058.

http://www.sciencedirect.com/science/article/pii/S1359431114008308




2014     


164. Ahmad Mozaffari , Moein Mohammadpour, Alireza Fathi , M. Gorji-Bandpy  " A Fuzzy Model with Thermodynamic Based Consequents and a Niching Swarm-Based Supervisor to Capture the Uncertainties of Damavand Power System." International Joural of Applied Metaheuristic Computing (IJAMC) 5 (3), 9-22.



163. M. Nasiri-Lohesara, M. Gorji-Bandpy, (2014), " Two-phase simulation of nanofluid in aheat exchaneger in turbulent flow regime." European Online Journal of Natural and Social Sciences. 3(3(S)), pp.' 95-104.



162. M Aliana,
M.Gorji-Bandpy, DD Ganji, S Soleimani, E Ghasemi,  A Darvan, (2014), " Two-phase natural convection of SiO2-water nanofluid in an inclined square enclosure." Transaction on Mechanical Engineering 21(5), 1643.



161. Roozbeh Saghatchi,  Jafar Ghazanfarian, Mofid Gorji-Bandpy, (2014) " Numerical Simulation of Water-Entry and Sedimentation of an Elliptic Cylinder Using Smoothed-Particle Hydrodynamics Method." Journal of Offshore Mechanics and Arctic Engineering136 (3), 031801.



160. M. Sheikholeslami, M.Gorji-Bandpy, R. Ellahi, Mohsan Hassand, Soheil Soleimani, (2014)   "CVFEM for MHD on Cu–water nanofluid flow and heat transfer." Journal of Magnetism and Magnetic Materials 349, 188-200.


159. M. Sheikholeslami, M.Gorji-Bandpy, D.D.Ganji, P.Rana and Soheil Soleiman,(2014),  Magnetohydrodynamic free convection of Al2O3–water nanofluid considering Thermophoresis and Brownian motion effects " , Computers & Fluids , Vol. 94  , pp.147–
160.

 http://www.sciencedirect.com/science/article/pii/S0045793014000553

 

158. M. Sheikholeslami, M. Gorji-Bandpy, D.D.Ganji,(2014), " Lattice Boltzmann method for MHD natural convection heat transfer using nanofluid", Powder Technology, Vol.254 , pp.82–93.

http://www.sciencedirect.com/science/article/pii/S0032591014000072

 

157. M. Sheikholeslami, M. Gorji-Bandpy,(2014), " Free convection of ferrofluid in a cavity heated from below in the presence of an external magnetic field", Powder Technology, Vol. 256 , pp.490–498.

 http://www.sciencedirect.com/science/article/pii/S0032591014000989

 

156. M.Sheikholeslami,M.Gorji-Bandpy, D.D.Ganji and Soheil Soleiman,(2014),"Heatflux boundary condition for nanofluidfilled enclosure in presence of magneticfield ", Journal of Molecular Liquids, Vol. 193,pp. 174-184.

http://www.sciencedirect.com/science/article/pii/S0167732213004522

 

155. M. Sheikholeslami, M. Gorji-Bandpy, R.Ellahi, M.Hassan, S.Soleimani, (2014), "Effects of MHD on Cu-Water nanofluidflow and heat transfer by means of CVFEM", Journal of Magnetism and ManetiMaterial, Vol.349., pp. 188-200.

 http://www.sciencedirect.com/science/article/pii/S0304885313006057

 

154. Mohsen Ghazikhani, Mohammad Hatami, Davood Domiri Ganji, M. Gorji-Bandpy, Ali Behravan and Gholamreza Shahi(2014),"Exergy recovery from the exhust cooling in a DI diesel engine for BSFC reduction purpose". Vol. 65, pp.44-51.

 http://www.sciencedirect.com/science/article/pii/S036054421301061X

 

153. M. Sheikholeslami, M. Gorji-Bandpy and Soheil Soleimani(2014), "Thermal management for free convection of nanofluid using two phase model", Journal of Molecular Liquids. Vol.194. pp.179-187.

 http://www.sciencedirect.com/science/article/pii/S0167732214000361

 

152. M. Sheikholeslami, M.Gorji-Bandpy and  Soheil Soleimani, (2014), " Two phase simulation of nanofluidflow and heat transfer using heatline analysis ", International Communications in Heat and Mass Transfer, Vol.47 , pp. 73–8.

 http://www.sciencedirect.com/science/article/pii/S0735193313001395

 

151. M. Sheikholeslami, M.Gorji-Bandpy, D.D.Ganji, Soheil Soleimani,(2014), " Magnetic  field  effect  on  nanofluid  flow  and  heat  transfer using  KKL  model", Journal  of  the  Taiwan  Institute  of  Chemical  Engineers   Vol. 45  , pp.795–807.

http://www.sciencedirect.com/science/article/pii/S1876107013002460

 

150. M. Sheikholeslami, M.Gorji-Bandpy, D.D. Ganji, Soheil Soleimani, (2014), "MHD natural convection in a nanofluid filled inclined enclosure with sinusoidal wall using CVFEM", Neural Comput & Applic, Vol. 24:8,pp. 873–882.

 http://link.springer.com/article/10.1007%2Fs00521-012-1316-4#page-1

 

149. Ahmad  Mozaffari, Mohammadreza  Azimi and M.Gorji-Bandpy,(2014), " Ensemble  mutable  smart bee  algorithm  and  a  robust  neural  identifier for  optimal  design  of  a  large  scale  power  system" , Journal  of  Computationand  Science, Vol. 5, pp. 206–223.

http://www.sciencedirect.com/science/article/pii/S1877750313001245

 

148. M. Sheikholeslami, M. Gorji-Bandpy, D.D.Ganji and Soheil Soleimani, (2014), " Natural  convection  heat  transfer  in  a  cavity  with  sinusoidal  wall  filled  with CuO–water  nanofluid  in  presence  of  magnetic  field " Journal  of  the  Taiwan  Institute  of  Chemical  Engineers , Vol.45  , pp.40–49.

http://www.sciencedirect.com/science/article/pii/S1876107013001089

 

147. M. Sheikholeslami, M. Gorji-Bandpy, and D.D. Ganji, S. Soleimani, (2014), "Natural Convection Heat Transfer In A Nanofluid Filled Inclined L-Shaped Enclosure", IJST, Transactions of Mechanical Engineering, Vol. 38, No. M1+, pp 217-226, Printed in The Islamic Republic of Iran, 2014.

 

146. M. Hatami, D. D. Ganji, M. Gorji-Bandpy,(2014), "CFD simulation and optimization of ICEs exhaust heat recovery using different coolants and fin dimensions in heat exchanger", Neural Computing and Applications, December 2014, Volume 25, Issue 7-8, pp 2079-2090.

http://link.springer.com/article/10.1007/s00521-014-1695-9

 

145.M. Hatami, D.D. Ganji, M. Gorji-Bandpy, (2014), "Numerical study of finned type heat exchangers for ICEs exhaust waste heat recovery", Case Studies in Thermal Engineering, Volume 4, November 2014, Pages 53-64, ISSN 2214-157X.

http://www.sciencedirect.com/science/article/pii/S2214157X14000240

 

144. E. Sourtiji, M. Gorji-Bandpy, D.D. Ganji, S.F. Hosseinizadeh, (2014), "Numerical analysis of mixed convection heat transfer of Al2O3-water nanofluid in a ventilated cavity considering different positions of the outlet port", Powder Technology, Volume 262, August 2014, Pages 71-81, ISSN 0032-5910.

http://www.sciencedirect.com/science/article/pii/S0032591014003799

 

143. M. Hatami, M. Jafaryar, D.D. Ganji, M. Gorji-Bandpy, (2014), "Optimization of finned-tube heat exchangers for diesel exhaust waste heat recovery using CFD and CCD techniques", International Communications in Heat and Mass Transfer, Volume 57, October 2014, Pages 254-263, ISSN 0735-1933.

http://www.sciencedirect.com/science/article/pii/S0735193314002012

 

142. Delara Soltani1, M. Gorji-Bandpy, (2014), "GDQ Simulation for Flow and Heat Transfer of a Nanofluid over a Nonlinearly Stretching Sheet", Vol.1, No.1, pp. 13-22.

http://airccse.com/aeij/current.html

141. M. Rahimi-Gorji, O. Pourmehran, M. Gorji-Bandpy, D.D. Ganji, (2014), "An analytical investigation on unsteady motion of vertically falling spherical particles in non-Newtonian fluid by Collocation Method", Ain Shams Engineering Journal, Available online 20 December 2014, ISSN 2090-4479, http://dx.doi.org/10.1016/j.asej.2014.10.016.

http://www.sciencedirect.com/science/article/pii/S2090447914001543

 

140. O. Pourmehran, M. Rahimi-Gorji, M. Gorji-Bandpy, D.D. Ganji, (2014), "Analytical investigation of squeezing unsteady nanofluid flow between parallel plates by LSM and CM", Alexandria Engineering Journal, Available online 8 December 2014, ISSN 1110-0168, http://dx.doi.org/10.1016/j.aej.2014.11.002.

http://www.sciencedirect.com/science/article/pii/S1110016814001069


139. Mohsen Sheikholeslami, Mofid Gorji Bandpy, R. Ellahi, A. Zeeshan, (2014), "Simulation of MHD CuO–water nanofluid flow and convective heat transfer considering Lorentz forces", Journal of Magnetism and Magnetic Materials, Volume 369, November 2014, Pages 69-80, ISSN 0304-8853, http://dx.doi.org/10.1016/j.jmmm.2014.06.017.

http://www.sciencedirect.com/science/article/pii/S0304885314005381

 

138. M. Gorji, A. Kazemi and D. D. Ganji, (2014), "Optimal Thermodynamic Design Of Turbofan Engines Using Multi-Objective Genetic Algorithm", international journal of engineering, Vol. 27, No. 6 (June 2014) 961-970.

http://www.ije.ir/abstract/%7BVolume:27-Transactions:C-Number:6%7D/=1708

 

137. M. Sheikholeslami, M. Gorji-Bandpy, and D.D. Ganji, (2014), "MHD free convection in an eccentric semi-annulus filled with nanofluid", Journal of the Taiwan Institute of Chemical Engineers.

http://dx.doi.org/10.1016/j.jtice.2014.03.010

 

136. M. Sheikholeslami, M. Gorji-Bandpy, and D.D. Ganji, (2014), "Investigation of Nanofluid Flow and Heat Transfer in Presence of Magnetic Field Using KKL Model", Arabian Journal for Science and Engineering, June 2014, Volume 39, Issue 6, pp 5007-5016

http://link.springer.com/article/10.1007%2Fs13369-014-1060-4

 

135. E. Sourtiji, M. Gorji-Bandpy, D.D. Ganji, S.M. Seyyedi, (2014), "Magnetohydrodynamic buoyancy-driven heat transfer in a cylindrical–triangular annulus filled by Cu–water nanofluid using CVFEM", Journal of Molecular Liquids, Volume 196, August 2014, Pages 370-380, ISSN 0167-7322, http://dx.doi.org/10.1016/j.molliq.2014.04.017.

http://www.sciencedirect.com/science/article/pii/S0167732214001792

 

134. E. Sourtiji, D.D. Ganji, M. Gorji-Bandpy, S.M. Seyyedi, (2014), "Numerical study of periodic natural convection in a nanofluid-filled enclosure due to transitional temperature of heat source", Powder Technology, Volume 259, June 2014, Pages 65-73, ISSN 0032-5910, http://dx.doi.org/10.1016/j.powtec.2014.03.055.

http://www.sciencedirect.com/science/article/pii/S0032591014002666

 

133. M. Hatami, D.D. Ganji, M. Gorji-Bandpy, (2014), "A review of different heat exchangers designs for increasing the diesel exhaust waste heat recovery", Renewable and Sustainable Energy Reviews, 2014, Vol. 37 p.p 168-181

https://www.infona.pl/resource/bwmeta1.element.elsevier-fcac3929-0006-367e-941a-00b5165c8e2a

 

132. M. Gorji, A. Kazemi and D. D.Ganji, (2014), "Uncertainties Due To Fuel Heating Value And Burner Efficiency On Performance Functions Of Turbofan Engines Using Monte Carlo Simulation", IJE TRANSACTIONS A: Basics Vol. 27, No. 7 (July 2014) 1139-1148  

http://www.ije.ir/abstract/%7BVolume:27-Transactions:A-Number:7%7D/=1737

 

131. Ahmad Khosravi, Mofid Gorji Band-pay, Farivar Fazelpour, (2014), "Optimizing of a gas turbine cycle by Genetic and PSO algorithms", Journal of Middle East Applied Science and Technology (JMEAST), Issue 21, Vol.3, August 2014, pp. 706-711

http://jmeast.webs.com/JMEAST%20Paper004,%20Sup%20Issue%2021,%202014-1.pdf

 

130. Arash Yahyazadeh, Hossein Yahyazadeh, Behnam Khoshandam, Mofid Gorji Bandpy, (2014), "Evaluation of Gas Solid Reactions in Packed Bed Applying Differential Transformation Method", Vol 11, No 12 (2014).

http://wjst.wu.ac.th/index.php/wjst/article/view/56



2013


129. SOURTIJI, Ehsan, and Mofid GORJI-Bandpy. (2013) "Numerical Analysis of Mixed Convection characteristics inside a ventilated cavity including the effects of nanoparticle suspensions." Thermal Science.

129. H.yahyazadeh, M.T. Khalili, D.D. Ganji, M. Gorji-Bandpy. (2013), "Evaluation of Fragment of a falling Drop Applying Volume of Fluid Method,IJNDES, Vol 5 No. 1, 2013, pp.115-120.


128.   M. Sheikholeslami, M. Gorji-Bandpy, D.D. Ganji, and S. Soleimani, (2013), "Effect of a Magnetic Field on Natural Convection in an Inclined Half-Annulus Enclosure Filled with Cu-Water Nanofluid using CVFEM", Advanced Powder Technology, www. Elsevier.com/locate/apt, Vol.24, pp. 980-991.

http://www.sciencedirect.com/science/article/pii/S0921883113000216

 

127. M. Gorji-Bandpy, M. Azimi, M. Jouya, (2013), "Tidal Energy and Main Resources in the Persian Gulf‌" , Distributed Generation and Alternative Energy Journal, Vol. 28, No. 2, pp. 61-78. Taylor and Francis Group.

http://www.tandfonline.com/doi/abs/10.1080/21563306.2013.10677551#.VIABHNKUdic

 

126.  S.M. Seyyedi, S. Soleimani, E. Ghasemi, D.D. Ganji, M. Gorji-Bandpy and H. Bararnia, (2013), "Numerical Investigation of Laminar Mixed Convection in a Cubic Cavity by MRT-LMB: Effects of the Sliding Direction", Numerical Heat Transfer, Part A, 63: pp. 285-304. Taylor and Francis Group.

 http://www.tandfonline.com/doi/abs/10.1080/10407782.2013.730456#.VI_TSNKUdic

 

125. M. Gorji-Bandpy , and M. Azimi, (2013), "Passive techniques for Fan Noise Reduction in New Turbofan Engines: Review", Journal of Engineering Science and Technology Review, Vol. 6(1), pp. 59-61.

http://www.jestr.org/downloads/Volume6Issue1/fulltext116113.pdf

 

124. M. Azimi, and M. Gorji-Bandpy, (2013), "Persian Gulf: Important resource of tidal energy for electrical power generation", Academia Journal of Environmental Science, Vol. 1, No.4, pp.62-65.

http://www.aeecenter.org/files/newsletters/EEMI/Summer2013/TidalEnergyPersianGulf.pdf 

 

123.  M. Sheikholeslami, M. Gorji-Bandpy, I. Pop, and S. Soleimani, (2013), "Numerical study of natural convection between a circular enclosure and a sinusoidal cylinder using control volume based finite element method", International Journal of Thermal Science, Vol. 72, pp. 147-158.

 http://www.sciencedirect.com/science/article/pii/S1290072913001142

 

122. M. Sheikholeslami, M.Gorji-Bandpy, D. D. Ganji, and S. Soleimani, (2013), "Natural convection heat transfer in a cavity with sinusoidal wall filled with cou-water nanofluid in presence of magnetic field", Journal of Taiwan Institute of Chemical Engineers, Vol. , pp.   

http://www.sciencedirect.com/science/article/pii/S1876107013001089 

 

121. M. Sheikholeslami, M.Gorji-Bandpy, and  D. D. Ganji, (2013), "Natural convection in a nanofluid filled concentric annulus between an outer square cylinder and an inner elliptic cylinder", Sharif university of Technology, Scientica Iranica, Transaction B: Mechanical Engineering, Vol. 20, No. 4, pp. 1241-1253.

 http://www.scientiairanica.com/en/ManuscriptDetail?mid=36

 

120. M. Sheikholeslami, M.Gorji-Bandpy, and G. Domairy, (2013), "Free convection of nanofluid filled enclosure using lattice Boltzmann method (LBM)", Applied Mathematics and Mechanics, Engl, Ed, Vol. 37, No. 7, pp. 833-846.  

 http://link.springer.com/article/10.1007%2Fs10483-013-1711-9#page-1

 

119. M.Gorji bandpy, D. D. Ganji, M. Hatami, A. Hasanpour, and A. K. Hossein, (2013), "Launching process for variable mass rocket by series solution method", Journal of Mechanical Engineering and Technology, Vol. 1, No.1, pp. 13-20.

 www.academicpub.org/DownLoadPaper.aspx?PaperID=14127

 

118. A. Mozaffari, M.Gorji-Bandpy, P. Samadian, R. Rastgar, and A. Rezania, (2013), "Comprehensive preference  optimization of an irreversible thermal engine using Pareto based mutable smart bee algorithm and generalized regression neural network", Swarm and Evoluationary Computaion, Vol. 9, pp. 90-103.

http://www.sciencedirect.com/science/article/pii/S2210650212000818

 

117. M. Sheikholeslami, M.Gorji-Bandpy, and S. Soleimani, (2013), "Two phase simulation of nanofluid flow and heat transfer sing heatlines analysis", International communication in Heat and Mass Transfer, Vol. 47 , pp. 73-81.

 http://www.sciencedirect.com/science/article/pii/S0735193313001395

 

116. M. Sheikholeslami, M.Gorji-Bandpy, S. M. Seyyedi, D. D. Ganji,  H. B. Rokhi, and S. Soleimani, (2013), "Application of LBM in simulation  of natural convection in a nanofluid filled square cavity with curve boundaries", Powder Technlogy, Vol. 247, pp.87-94.

 http://www.sciencedirect.com/science/article/pii/S0032591013004142

 

115. A. Hasanpour, N. Khademzadeh, M. Hatami, M.Gorji bandpy, D.D. Ganji(2013), ''Propulsion an launching analysis of variable-mass rockets by analytical methods'', Propulsion and Power Research, 2 (3):335-233.

http://www.sciencedirect.com/science/article/pii/S2212540X13000394

 

114. M. Dayan, S.M. Seyyedi, G.G. Domairry, M.Gorji bandpy. (2013), ''Analytical Solution of Flow and Heat Transfer over a permeable Streching Wall in a porous Medium'', Mathematica Problems in Engineering, DIO.10.1155/2013/682795.

http://www.hindawi.com/journals/mpe/2013/682795/

 

113. M.Gorji-bandpy , pendarsamadian, rouzbeh.rastegar, alireza rezaian ahmad. mozaffari(2013), ''Comprehensive preference optimization of an irreversible thermal engine using pareto based mutable smart bee algorithm and generalized regression neural network'', Swarm and Evolutionary Computation, Vol. 9 , pp(2013).

http://vbn.aau.dk/en/publications/comprehensive-preference-optimization-of-an-irreversible-thermal-engine-using-pareto-based-mutable-smart-bee-algorithm-and-generalized-regression-neural-network(b6ea29a2-b902-47a9-8d42-8ce2b1a5233d).html

 

112. M. Sheikholeslami, M.Gorji-Bandpy, I. Pop, S. Soleimani, (2013), "Numerical study of natural convection between a circular enclosure and a sinusoidal cylinder using control volume based finite element method", International Journal of Thermal Sciences , Vol. 72 , pp. 147-158.

http://www.sciencedirect.com/science/article/pii/S1290072913001142

 

111. M. Sheikholeslami, M.Gorji-Bandpy, D. D. Ganji ,(2013), "Natural convection in a nanofluid concentric annulus between an outer square cylinder and an inner elliptic cylinder", Scientia Iranica B, Vol. 20(4), pp.1241-1253.

http://www.scientiairanica.com/en/ManuscriptDetail?mid=36

 

110. Mozaffari, Ahmad, Mohammadreza Azimi, M.Gorji-Bandpy,,(2013), "Design and Control of an Energy Cycle Using a Self Organized Evolutionary Strategy", journal of bioinformatics and intelligent control, Vol.2, No.2, pp. 1-13. American Scientific Publishers, Vol. 2 (2), pp.125-13.

http://www.ingentaconnect.com/content/asp/jbic/2013/00000002/00000002/art00007?crawler=true&mimetype=application/pdf

 

109. Mohammadreza Azimi and Mofid M.Gorji-Bandpy, (2013), " Important resource of tidal energy for electrical power generation",  Academia Journal of Environmental Sciences, (4): 062-065.

https://www.academiapublishing.org/journals/ajes/abstract/2013/Apr/Azimi%20and%20Gorji-Bandpy.htm

 

108. M. Sheikholeslami, M.Gorji-Bandpy, D.D.Ganji, (2013)," Numerical investigation of MHD effects on Al2O3ewater nanofluid flow and heat transfer in a semi-annulus enclosure using LBM",  Energy , Vol. 60,pp.501-510.

http://www.sciencedirect.com/science/article/pii/S0360544213007081


107. GholamReza Kefayati, Mofid Gorji, Hasan Sajjadi, Davood Domiri Ganji, (2013), "Investigation of Prandtl number effect on natural convection MHD in an open cavity by lattice Boltzmann method", Engineering Computations, Vol. 30 Iss: 1, pp.97 – 116.

http://www.emeraldinsight.com/doi/abs/10.1108/02644401311286035


106. M. Rostamani, S. Najafi, E.Amini and M. Gorji, (2013),  " Numerical study of turbulent force convection flow of AL2O3 nano-fluid in the tube considering variable properties", Journal of Hydrodynamics, Ser. B

http://www.journals.elsevier.com/journal-of-hydrodynamics/


2012



105. Ahmad Mozaffari, M.Gorji-Bandpy, P Samadian, SM Noudeh, (2012), "Analyzing, controlling, and optimizing Damavand power plant operating parameters using a synchronous parallel shuffling self-organized Pareto strategy and neural network: a surve." Proceedings of the Institution of Mechanical Engineers Part A Journal of Power and Energy (P I MECH ENG A-J POW).




104.  D.D. Ganji, M. Gorji-Bandpy, and M. Mostofi , (2012), " Analytical Solutions of Electrokinetics Driven Flow in a Nanotube with Power Law Fluid by HPM ", Applied Mechanics and Materials, Vols. 110-116, pp. 3663-3666.

http://www.scientific.net/AMM.110-116.3663

 

103.  D.D. Ganji, M. Gorji-Bandpy, and M. Mostofi , (2012), " Study of Electroosmotic Flow in a Nanotube with Power Law Fluid", Applied Mechanics and Materials, Vols. 110-116, pp. 3633-3638.

http://www.scientific.net/AMM.110-116.3633

 

 102.  D.D. Ganji, M. Gorji-Bandpy, and M. Mostofi , (2012), " Study of Electroosmotic Flow in a Nanotube with power Law Fluid", Applied Mechanics and Materials, Vols. 110-116, pp. 3633-3638. DOI: 10.4028/www.scientific.net/AMMM.

http://www.scientific.net/AMM.110-116.3633

 

101. S. Soleimani, M. Sheikholeslami, D.D. Ganji, and M. Gorji-Bandpy, (2012), "Natural Convection Heat Transfer in a Nanofluid Filled Semi-Annulus Enclosure", International Communications in Heat and Mass Transfer, Vol. 39, pp. 565-574.

http://www.sciencedirect.com/science/article/pii/S0735193312000176

 

100. H. Sajjadi, M. Gorji-Bandpy, D.D. Ganji, R. Kefayati, (2012), "Lattice Boltzman Simulation of MHD Mixed Convection in a Two-Sided Lid-Driven Square Cavity", Heat Transfer Asian Research, Vol. 41, No. 2, pp. 179-195.

http://www.sciencedirect.com/science/article/pii/S1026309812001368

 

99. M. Gorji-Bandpy, and M. Azimi, (2012), "Technologies for Jet Noise Reduction in Turbofan Engines", Aviation, Taylor and Francis Group, Vol. 16, No. 1, pp. 25-32, DOI: 10.3846/16487788.2012.679770.

http://www.tandfonline.com/doi/abs/10.3846/16487788.2012.679770#.VH8C5tKUdic

 

98. A. Mozaffari, M. Gorji-Bandpy, T.B. Gorji, (2012), "Optimal Design of Constraint Engineering Systems: Application of Mutable Smart Bee Algorithm", International Journal of Bio-Inspired Computation, Vol. 4, No. 3, pp. 167-180.

http://dl.acm.org/citation.cfm?id=2330107

 

97. M. Sheikholeslami, M.Gorji-Bandpy, D.D. Ganji, S. Soleimani, and S.M. Seyyedi, (2012), "Natural Convection of Nanofluids in an enclosure between a circular and a sinusoidal cylinder in the presence of magnetic field", Int. Communications in Heat and Mass Transfer, Vol. 39, pp. 1431-1443.

http://www.sciencedirect.com/science/article/pii/S0735193312001868

 

96. A.Z. Ghadi, H. Goodarzian, M. Gorji-Bandpy, and M.S. Valipour, (2012), "Numerical Investigation of Magnetic Effect on Forced Convection around Two-Dimensional Circular Cylinder embedded in Porous Media", Engineering Applications of Computational Fluid Dynamics, Vol. 6, No. 3, pp. 395-402.

http://www.tandfonline.com/doi/pdf/10.1080/19942060.2012.11015430

 

95. M. Sheikholeslami, M. Gorji-Bandpy, and D.D. Ganji, (2012), "Magnetic field effects on Natural Convection around a Horizontal Circular Cylinder inside a square enclosure filled with nanofluid", Int. Communications in Heat and Mass Transfer, Vol. 39, pp. 978-986.

http://www.sciencedirect.com/science/article/pii/S0735193312001194

 

94. G.R. Kefayati, M. Gorji-Bandpy, H. Sajjadi, and D.D. Ganji, (2012), "Lattice Boltzman Simulation of MHD Mixed Convection in a Lid-driven Square Cavity with linearly Heated Wall", Scientia Iranica, Sharif University of Technology, Transaction B: Mechanical Engineering, Vol. 19, No.4, pp. 1053-1065.

http://www.sciencedirect.com/science/article/pii/S1026309812001368

 

93. E. Sourtiji, S.F. Hosseinizadeh, M. Gorji-Bandpy, (2012), "Numerical Simulation of Compressible high gradient Thermobuoyant Flow in Square Enclosures with Localized Heating from Below", Int. Communications in Heat and Mass Transfer, Vol. 39, pp. 987-994.

http://www.sciencedirect.com/science/article/pii/S0735193312001170

 

92. Hosseinzadeh, M. Gorji-Bandpy, G. Javadi-Rad, M. Keshavarz, (2012), Experimental and Numerical Study of Impact of Air Filter Holes Masking on Altitude at Heavy-Duty Diesel Engine ModernMechanicalEngineering,pp.157-166,doi:10.4236/mme.2012, (http://www.scirp.org/journal/mme).

http://www.scirp.org/journal/PaperInformation.aspx?PaperID=25136#.VH__6dKUdic

 

91. M. Gorji-Bandpy, M. Azimi, (2012), "Airframe Noise Sources and Reduction Technologies in Aircraft", Noise and Vibration Worldwide, Vol. 43, pp. 29-36.

http://multi-science.metapress.com/content/879560l488rq8m85/

 

90. S.M. Seyyedi, H. Bararnia, D.D. Ganji, M. Gorji-Bandpy, S. Soleimani, (2012), "Numerical Investigation of the Effect of a Splitter Plate on Forced Convection in Two Dimensional Channel with an Inclined Square Cylinder‌", International Journal of Thermal Sciences, Vol. 61, pp.1-14.

http://www.sciencedirect.com/science/article/pii/S1290072912001949

 

89. M. Gorji-Bandpy, M. Hatami, A. Hassanpour, D.D. Ganji, (2012), "Nonlinear Thermal Analysis of Solar Air Heater for the Purpose of Energy Saving, Iranica Journal of Energy and Environment", Vol. 3, No. 4, pp. 361-369. 

http://www.academia.edu/2829641/Nonlinear_Thermal_Analysis_of_Solar_Air_Heater_for_the_Purpose_of_Energy_Saving

 

88. R. Akbari Alashti, M. Gorji-Bandpy, A. Mozaffari, (2012), "Vector Mutable Smart Bee Algorithm for Engineering Optimization‌", International Journal of Computational Sciences and Engineering, Inderscience Publisher. 

http://www.inderscience.com/info/ingeneral/forthcoming.php?jcode=ijcse

 

87. M. Sheikholeslami, M. Gorji-Bandpy, D.D. Ganji, S.S. Soleimani, (2012), "MHD Natural Convection in a Nanofluid Enclosure with Sinusoidal Wall using CVFEM‌", Neural Computation and Application, DOI: 10-1007/500521-012-1316-4, Springer-Verlag, London, 2012.

http://link.springer.com/article/10.1007%2Fs00521-012-1316-4#page-1

 

86. M. Gorji-Bandpy, A. Kazemi, D.D. Ganji, (2012), "Thermodynamic Study of Turbofan Engine in off-Design Conditions‌", Journal of Basic Science and Research, Vol. 2, No. 11, pp. 11239-11253.

http://www.textroad.com/Old%20Version/pdf/JBASR/J.%20Basic.%20Appl.%20Sci.%20Res.,%202%2811%2911239-11253,%202012.pdf

 

85. S.Hosseinzadeh, and M. Gorji-Bandpy, (2012), "The impact of mass flow and masking on the pressure drop of air filter in heavy-duty diesel engine", ExperimentalFluid Mechanics, Vol. 25, No.1023, pp.10-21.

http://www.epj-conferences.org/articles/epjconf/abs/2012/07/epjconf_EFM2011_01023/epjconf_EFM2011_01023.html


84.  M. Gorji-Bandpy, A. Mozaffari, S. Mohammadrezaei, (2012) "  Optimizing maximum power output and minimum entropy generation of Atkinson cycle using Mutable Smart Bees Algorithm", International Journal of Soft Computing and Engineering, Vol.7, No.2, pp. 108-120.

http://dl.acm.org/citation.cfm?id=2338875

 

83.  M. Gorji-Bandpy, A. Mozaffari, (2012), "Multi-Objective Optimization of an Atkinson Cycle Using Mutable Smart Bee Algorithm", Applied Computational Intelligence and Computing, Vol.2012, article ID 652391, doi:10.1155/2012.

http://www.hindawi.com/journals/acisc/2012/652391/

 

82.   M. Gorji-Bandpy, A. Mozaffari, Tahere B.Gorji, (2012), " Verifying the Optimum Operating Parameters of Mahshahr Power Plant using a Synchronous Self learning Evolutionary Algorithm", International Journal of Energy Science and Technology, Vol.3, No.2, pp. 50-62.

http://www.journal-enertech.eu/

 
   
2011



81.  H. Sajjadi, M. Gorji-Bandpy, S.F. Hosseinizadeh, G. Kefayati, and D.D. Ganji, (2011), "Numerical Analysis of Turbulent Natural Convection in Square cavity using Large Eddy Simulation in Lattice Boltzman Method", International Journal of Science and Technology, Transactions of Mechanical Engineering, Vol.35, No.2, pp. 133-142.

http://ijstm.shirazu.ac.ir/article_901_0.html


80. M.Gorji-Bandpy, M.Azimi, M. Mostofi, (2011), "Analytical methods to a generalized duffing oscillator." Journal of Applied Sciences Research;Nov2011, Vol. 7 Issue 11, p788.


79.  G.H. Kefayeti, S.F. Hosseinzadeh, M.Gorji-Bandpy, and H.Sajjadi, (2011), "Lattice Boltzman Simulation of  Natural Convection in an Open encluser Subjugated to Watter/Copper nanofluid", International Journal of Thermal  Sciences, Vol. 52, pp. 91-101. 

http://www.sciencedirect.com/science/article/pii/S1290072911002742

 78. D.D. Ganji, M. Gorji-Bandpy, and M. Mostofi , (2011), " Analytical Solutions of Electrokinetics Driven Flow in a   Nanotube with Complex Fluid by HPM ", Applied Mechanics and Materials, Vols. 110-116, pp. 3663-3666.

http://www.scientific.net/AMM.110-116.3663


77. M.Gorji-Bandpy, and H. Goodarzian, (2011), "Exergoeconomic Optimization of Gas Turbine Power Plants Operating Parameters Using Genetic Algorithms: A case study", Thermal Science, Thsci. 2010.237, Vol. 15, pp. 43-54.

http://www.doiserbia.nb.rs/Article.aspx?id=0354-98361100010G#.VH2x5dKUdic

 

76.  M.Gorji-Bandpy, M. Alipanah, M. Shateri, and E. Farnad, (2011), "Analytical Solution for Laminar Flow through Leaking Tube", Applied Mathematics and Mechanics, Vol. 32, No.1, pp. 69-74. 

http://link.springer.com/article/10.1007%2Fs10483-011-1394-6#page-1

 

75.  G.H. Kefayati. S.F. Hosseinzadeh, M.Gorji-Bandpy, and H. Sajjadi, (2011), " Lattice Boltzman Solution of Natural Convection in tall enclosures using Water/SiO2 nanofluid", Int. Communications in Heat and Mass Transfer,38,pp.798-805.

http://www.sciencedirect.com/science/article/pii/S0735193311000418

 

74.  S. Soleimani, D.D. Ganji, M.Gorji-Bandpy, H. Bararnia, and E. Ghasemi, (2011), "Optimal location of  a pair heat source-sink in an enclosed square cavity with natural convection through PSO algorithm", Int. Communications in Heat and Mass Transfer, No.38 ,pp.652-658. 

 

73.  E. Sourtiji, S.F. Hosseinzadeh, M.Gorji-Bandpy, and D.D. Ganji (2011), " Heat Transfer enhancement of mixed convection in a square cavity with inlet and outlet ports due to oscillation of incoming flow", Int. Communications in Heat and Mass Transfer", Vol. 38, No.6, pp. 806-814. 

http://www.sciencedirect.com/science/article/pii/S0735193311000686

 

72.  H. Naeimi, D.D Ganji, M.Gorji-Bandpy, G. Javadirad, and M. Keshavarz, (2011), "A Parametric Design of Compact Exhaust Manifold Junction in Heavy Duty Diesel Engine using CFD", Thermal Science, Thsci. 2011.245, Vol.15, No.4, pp. 1023-1033.

http://www.doiserbia.nb.rs/Article.aspx?id=0354-98361100041N#.VH6x69KUdic

 

71. E. Sourtiji, S.F. Hosseinizadeh, M. Gorji-Bandpy, and J.M. Khodadadi, (2011), "Computational Study of Turbulent Forced Convection Flow in a Square Cavity with Ventilation Parts", Numerical Heat Transfer, Part A: Applications,Vol.59 ,No.12 ,pp.954-969. (Taylor and Francis Group).

http://www.tandfonline.com/doi/abs/10.1080/10407782.2011.582406?journalCode=unht20#.VH6ytdKUdic

 

70.  E. Sourtiji, S.F. Hosseinizadeh, M.Gorji-Bandpy, and D.D. Ganji (2011), " Effect of Water Based  Nanofluids on Heat Transfer and Pressure Drop in Periodic Mixed Convection Inside a Square Ventilated Cavity", International Communications in Heat and Mass Transfer, Vol. 38, No.8, pp. 1125-1134.

 

69. D.D. Ganji, M.Gorji-Bandpy and M. Mostofi, (2011), “Numerical Simulation of Electrokinetic Flow in a Nanotube with Variable Physical Properties", Lecture Notes in Electrical Engineering, Communication Systems and Information Technology, Vol.4, 2011, pp. 125-134.

http://link.springer.com/content/pdf/10.1007%2F978-3-642-21762-3_107.pdf

 

68.  H. Sajjadi, M.Gorji-Bandpy, G.H. Kefayati, D.D. Ganji, and M. Shayannia, (2011), " Simulation of Natural Convection flow in an Inclined Open Cavity Using Lattice Boltzman Method", World Academic of Science, Engineering and Technology, Vol.79, pp. 265-271.

 

67.  M. Kazemi-Sangsereki, D.D. Ganji, and M.Gorji-Bandpy, (2011), "Application of the Homotopy Perturbation Method (HPM) and Vriational Iteration Method (VIM) to Gas Dynamic Equations", TWMS Journal of Applied and Engineering Mathematics, Vol.1, No.1, pp. 27-34.

http://jaem.isikun.edu.tr/web/archive/87-vol1no1/166-application-of-the-homotopy-perturbation-method-hpm-and-variational-iteration-method-vim-to-gas-dynamic-equation

 

66.  M. Alinia, D.D. Ganji , M.Gorji-Bandpy, (2011), " Numerical Study of Mixed Convection in an Inclined two sided Lid Driven Cavity Filled with Nanofluid Using Two-Phase Mixture Model", International Communications in Heat and Mass Transfer, Vol.38, No.1, pp. 1428-1435. 

http://www.sciencedirect.com/science/article/pii/S0735193311001758

 

65.  M.Gorji-Bandpy,  . , H. Yahyazadeh-Jelodar, and M. Khalili, (2011) , " Optimization of Heat Exchanger Network", Applied Thermal Engineering,Vol.31, No.5, 2011, pp. 779-784. 

http://www.sciencedirect.com/science/article/pii/S1359431110004655

 

64.  M.Gorji-Bandpy, Mirgolbabaei, M., Barari, A., Domairy, G. and Nadim, N., (2011), "Numerical Analysis of Longitudinal Location Optimization of Vortex Generator in Compact Heat Exchanger", International Journal for Numerical Methods in Fluids, Vol.66, No.6, pp. 705-713. DOI: 10.1002/fld.2278.

http://onlinelibrary.wiley.com/doi/10.1002/fld.2278/abstract

 

63.  G.H. Kefayeti, S.F. Hosseinzadeh, M.Gorji-Bandpy, and H.Sajjadi, (2011), "Lattice Boltzman Simulation of Natural Convection in an Open encluser Subjugated to Watter/Copper nanofluid", International Journal of Thermal Sciences.

http://www.sciencedirect.com/science/article/pii/S1290072911002742

 

62.  D.D. Ganji, M. Gorji-Bandpy, and M. Mostofi, (2011), "Variable Physical Properties Effect on Velocity and Potential Distribution in Nanotube with Large Zeta Potential", International Review of Electrical Engineering, (Praise Worthy Prize).

http://link.springer.com/chapter/10.1007%2F978-3-642-21762-3_107

 

61.  M. Kazemi-Sansarki, D.D. Ganji, M. Gorji-Bandpy, and M. Mostofi, (2011), "Homotopy Perturbation Method for a Non-Linear Unforced and Undamped Duffing Equation", International Review of Mechanical Engineering, (Praise Worthy Prize).

http://connection.ebscohost.com/c/articles/69860433/homotopy-perturbation-method-non-linear-unforced-undamped-duffing-equation


59.   M. Gorji-Bandpy, A. Mozaffari, (2011), "Economic and Exergetic Analysis of Damavand Power Plant: A Case study in Iran" Energy Sources, Part B.

http://pia.sagepub.com/content/226/7/848.refs




2010


58.  D.D. Ganji, M.Gorji-Bandpy, M. Mostofi, and P. Jalili, (2010), " HPM Based Simulation of Poisson –Boltzman Equation with Small Zeta Potential", Nonlinear Science Letters D, Vol. 2, pp.83-86.

http://www.nonlinearscience.com/downloads/NSLD_vol_2.pdf



57. M.Gorji-Bandpy, , H.Mirgolbabaei, A. Barari and G. Domairy,(2010), "Numerical Investigation of Heat Transfer Augmentation through Geometrical Optimization of Vortex Generator",    Central European Journal of Physics, DOI:10.2478/s11534-010-0005.

www.versita.com/science/physics/cejp

 

46.  N.Jamshidi and   M.Gorji-Bandpy, . (2010), "Technologies for Noise Mitigation in Turbofan Engines", International Journal of Multiphysics.

www.multiphysics.org

 

56.  N.Ghorbani , H.Taherian,M. Gorji-Bandpy, . and H.Mirgolbabaei, (2010), "An Experimental study on thermal performance of shell-and coil Heat Exchanger," International Communications in Heat and Mass Transfer, Vol.37,pp.775-781.

http://www.sciencedirect.com/science/article/pii/S073519331000045X


55. D.D. Ganji , M.Gorji-Bandpy, . and M.Mostofi. (2010), "Simulation of Lakes Pollution Distribution by Homotopy Perturbation Method", International Review of Civil Engineering, Praise Worthy Prize.Vol. 1., No. 1, pp. 119-123.

www.praiseworthyprize.com/irece

 

54. D.D.Ganji, M.Gorji-Bandpy, . and M.Mostofi. (2010), "Analytical Solution of an Electro osmotic Flow in a Nano-Channel using curvilinear coordinates" , International Review on Modeling and Simulation , Praise Worthy Prize. , Vol. 3, No. 2, pp. 202-205. 

www.praiseworthyprize.com/irece

 

53.  F.Noori ,M. Gorji-Bandpy. and A.Kazemi. (2010), " Thermodynamic Optimization of ideal Turbojet with afterburner engines using Non – Dominated Sorting Genetic Algorithm II ", Proceedings of the Institution of Mechanical Engineers, Vol.224, Part G .Journal  of Aerospace Engineering. DOI:10.1243/09544100JAER0771.

http://pig.sagepub.com/content/224/12/1285.short

 

52.M.Gorji-Bandpy.,H.Goodarzian,and M.Biglari,(2010)," The Cost Effective Analysis of a Gas Turbine Power Plant on the Unit Cost of product", Energy Sources, Part B, 5:348-358, Economics, Planning, and Policy, Taylor and Francis Group,Vol.5, No.4, pp.348-358 Online ISSN:1556-7249, DOI: 1080/15567240903096894.

http://www.tandfonline.com/doi/abs/10.1080/15567240903096894#.VH2vTtKUdic

 

51.  G. Javadi-Rad, M.Gorji-Bandpy,., M.Keshavarz, and H. Safari,(2010), "An Investigation on Injection Characteristics of Direct-Injected Heavy Duty Diesel Engine by Means of Multi-Zone Spray Modeling", Oil and Gas Science and Technology-Revue de l’IFP, DOI: 10.1051/ogst/2009048.

http://ogst.ifpenergiesnouvelles.fr/articles/ogst/pdf/2010/06/ogst09067.pdf

 

50.  N.Ghorbani , H.Taherian, M.Gorji-Bandpy, . and H.Mirgolbabaei, (2010), "Experimental study of mixed convection heat transfer in vertical helically coiled tube heat exghangers", Experimental Thermal and Fluid Sciences, Vol.34, pp.900-905. 

http://www.sciencedirect.com/science/article/pii/S0894177710000282

 

49. M. Rostamani, S. F. Hosseinizadeh,M. Gorji-Bandpy, . and J. M. Khodadadi, (2010),  "Numerical study of turbulent forced convection flow of nanofluids in a long horizontal duct considering variable properties", Internatianal Communications in Heat and Mass Transfer, DOI: 1016/ J. icheatmasstransfer. 2010/ 06/ 007, 37, pp. 1426-1431.

http://www.sciencedirect.com/science/article/pii/S0735193310001971

 

48.  M.Gorji-Bandpy, and M. Alipour, (2010), " Analytical Solution of Regularized Long Wave (RLW) Equation with Homotopy Analysis Method", Journal of Mathematical Sciences: Advances and Applications, 2010 Scientific Advances Publishers, Vol. 6, No. 1, pp. 165-177.

http://www.scientificadvances.co.in/abstract/1/26/334

 

47.  M. Kazemi, D.D. Ganji, M.Gorji-Bandpy, And M. Alijani, (2010), " Homotopy Perturbation Method for a Non-linear Unforced and Undamped Duffing Equation", Advances and Applications in Mathematical Sciences, Vol.2 , 2010 Milli Publications, pp. 1-9.

http://connection.ebscohost.com/c/articles/69860433/homotopy-perturbation-method-non-linear-unforced-undamped-duffing-equation

 

46.  M.Gorji-Bandpy, and M. Kazemi, (2010), " Computational Investigation of Air-Gas Venturi Mixer for powered Bi-Fuel Diesel Engine", Int. Journal of Mechanical and Material Engineering, Vol.1, No. 2, pp. 43-54.

http://connection.ebscohost.com/c/articles/60742651/computational-investigation-air-gas-venturi-mixer-powered-bi-fuel-diesel-engine

 

45.  M.Gorji-Bandpy, and H. Sajjadi, (2010), "An Experimantal Study of the Effect of Coil Step on Heat Exchanger Coefficient in Shell-and-Coil Heat Exchanger", Int. Journal of Mechanical and Material Engineering, Vol.1, No.2, pp. 80-91.

http://www.hindawi.com/journals/je/2014/641954/

 

          
2009



44. D.D.Ganji, M.Gorji-Bandpy,, S.Soleimani, and M.Esmaeilpour,(2009),"Solution of nonlinear cubic-quintic duffing oscillators using He’s Energy Balance Method", Journal of Zhejiang University Science A (JZUS),Vol.10,No.9,pp.1263-1268.

http://link.springer.com/article/10.1631%2Fjzus.A0820651#page-1

 

43. M.Rostamian, D.D.Ganji andM. Gorji-Bandpy. (2009), " Optimization of the Geometry of Spins and Analysis of Heat transfer and thermal efficiency with Variable Thermal Conductivity" , International Journal of Modern Physics B. ,Vol.4,No.2, pp.159- 174.

http://www.scirp.org/journal/PaperInformation.aspx?PaperID=25136#.VHthYtKUdic

 

42.  H.Bararnia, G.Domairry, M.Gorji-Bandpy. and A.Rezania,(2009), " An approximation of the analytic solution of some nonlinear heat transfer in fin and 3D diffusion equations using HAM" ,Numerical Methods for Partial Differential Equations, Vol. 26, No.1,pp.1-13. 

http://onlinelibrary.wiley.com/doi/10.1002/num.20404/abstract

 

41. M. Gorji-Bandpy, S.Soleimani, and, D.D.Ganji,(2009), "The Effect of Different Injection Strategies and Intake Conditions on the Emissions Characteristics in a Diesel Engine", Int.Journal of Vehicular Technology, Hindawi Publishing Corporation, Vol.2, Research Article ID105363,11 pages, DOI: 10.1155/2009/105363. 

http://www.hindawi.com/journals/ijvt/2009/105363/

 

40.  M.J.Hosseini, M.Gorji-Bandpy, and M.Ghanbarpour,(2009), "Solution of Temperature Distribution in a Radiating Fin Using Homotopy Perturbation Method", Mathematical Problems in Engineering, Hindawi Publishing Corporation, Vol.2, Research Article ID831362,8 pages, DOI: 10.1155/2009/831362.

http://www.hindawi.com/journals/mpe/2009/831362/

 

39.  D.D.Ganji, M.Gorji-Bandpy, M.Alipanah, and E.Farnad, (2009) , " Analytical Solutions to Non linear Equations Arising in Heat Transfer by Variational Iteration, Homotopy Perturbation, and Adomian Decomposition Methods", Numerical Methods for Partial Differential Equations, An  International  Journal, Wiley Science  DOI:10,1002/num.20503. (www.interscience.wiley.com), pp. 1463-1475.

http://onlinelibrary.wiley.com/doi/10.1002/num.20503/abstract

 

38.  N.G.Mianroudi , Taherian ,H.,and , M.Gorji-Bandpy. (2009) " Designing shell-and coil mixed  convection heat exchangers " , 2008 Proceeding of the ASME Summer Heat Transfer Conference , HT2008 ,Vol . 2, no.3, PP.137-143.

http://proceedings.asmedigitalcollection.asme.org/proceeding.aspx?articleid=1638574

 

37.  G.Javadirad , M.Gorji-Bandpy. , M.Keshavarz , and H.Safari. (2009), "The effect of different injection characteristics on the Performance of a Direct Injected Heavy Duty Diesel Engine", International Journal of Vehicular Technology , Hindawi Publishing Corporation , Research Article , ZD 802608.V1 , 9 pages ,DOI: 10.NSS/2009/802608.

http://www.hindawi.com/journals/ijvt/2009/105363/




2008


36.  E.Mohseni, M.Gorji-Bandpy. and M.Masoudy,(2008)," A Numerical Study of flow and Temperature Field  in Circular Tube Heat  Exchanger with Elliptic Vortex Generator", Thermal Science, Vol.12, No.2, pp.129-136. 

http://www.doiserbia.nb.rs/Article.aspx?id=0354-98360802129M#.VHrw-9KUdic

 

35.  V.Ebrahimian and M.Gorji-Bandpy.,(2008), "Two Dimensional Modeling of Water Spray Cooling in Superheated Steam", Thermal Science, Vol.12, No.2, pp.79-88.

http://www.doiserbia.nb.rs/Article.aspx?id=0354-98360802079E#.VHrxYtKUdic

 

34.  A.Sadighi, D.D.Ganji, M. Gorji-Bandpy. and N.Tolou,(2008), "Numerical simulation of heat like models with variable coefficients by Variational Iteration Method", Journal of Physics: Conference Series, Vol.96, pp.1-6.

http://iopscience.iop.org/1742-6596/96/1/012083/pdf/1742-6596_96_1_012083.pdf

 

33. D.D.Ganji, M.Gorji-Bandpy,,A.Sadighi, H.Tolou and N.Haghparast,(2008), "Large Deflection  of a Cantilever Beam under point load using the Homotopy Perturbation Method", Topological Methods in Nonlinear Analysis, Vol.31,No.2,pp.271-277.

https://www.tmna.ncu.pl/static/archives/vol-31-2.html

 

32.  H.Bararnia, M.Gorji-Bandpy,, D.Ganji and A.R.Ghotbi,(2008),"An Analytical Study of Boundary Layer Flows on a Continuous Surface",Acta Applicandae Mathematica, Springer,Vol.16,No.1, (USA), DOI:101007/s10440-008-9286-3,pp.125-133.

http://link.springer.com/article/10.1007%2Fs10440-008-9286-3

 

31. N.Nadim, M.Gorji-Bandpy. and D.Ganji,(2008)," Analytical Approximation of Three-Dimensional Flow in Stagnation Point", Advances and Applications in Fluid Mechanics, Vol.4,No.2, pp.135-146.

http://www.pphmj.com/abstract/3641.htm

 

30. M.Gorji-Bandpy,, S.Soleimani and F.Hosseinejad,(2008), "Pressure and Heat Transfer in Staggered Arrangement Circular Tubes with Airfoil Vortex Generator", International Energy Journal, Asian Ins. of Technology, Vol.9,No.3,pp.207-214. 

http://www.rericjournal.ait.ac.th/index.php/reric/article/view/487

 

29. M.Gorji-Bandpy. and M.Shateri,(2008), "Analysis of Pipe Breaks in Urban Water distribution Networks-Three case studies in Iran", International Energy Journal, Asian Ins. of Technology,Vol.2,No.3,pp.117-123.

http://www.buildwelllibrary.org/design/building-science

 

28.  M.Gorji-Bandpy,. and N.Ghorbani , (2008),"The Influences of Velocity on Pressure losses in Hydrate Slurry", Int. Journal of Num. Methods for Heat and Fluid Flow, Vol.18, No.1, pp.5-14. 

http://www.emeraldinsight.com/doi/abs/10.1108/09615530810839705

 

27.  M.Gorji-Bandpy, S.Soleimani and B.Jafari,(2008),"Numerical Analysis of Fluid Flow in a  Duct around Perpendicular Cylinder with Triangle Cross Section obstacle", Int. Journal of Dyn. of   Fluids, Research India Pub., Vol.4,No.2, pp.93-107.

http://connection.ebscohost.com/c/articles/47081833/numerical-analysis-fluid-flow-duct-around-perpendicular-cylinder-triangle-cross-section-obstacle

 

26.  M.Gorji-Bandpy,M.Nourollahi,B.Jafari and G.Javadi,(2008),"The Effect of Fluctuation Flow  on the EPPLER 435 and S8035 Airfoils", Int. Journal of Dynamic of Fluids, Research India Pub., Vol.4,No.2, pp.159- 174. 

http://connection.ebscohost.com/c/articles/47081838/effect-fluctuation-flow-eppler-435-s8035-airfoils

 

25.  M.Gorji-Bandpy. ,D.D.Ganji and S.Soleimani, (2008),"The effect of variations of intake pressure and temperature on a Heavy Duty Diesel Engine",Green Chemistry and Engineering. Int. Conf. on Process Intensification and Nanotechnology, 15-18Sep., 2008, NewYork, U.S.A. pp. 53-64.

https://getinfo.de/app/The-effect-of-variations-of-intake-pressure-and/id/BLCP%3ACN073674863




2007



 24.  V. Ebrahimian and M.Gorji-Bandpy.,(2007),"Two-Dimensional non-Stationary Modeling of Water Spray Cooling in Superheated Steam", WSEAS TRANSACTIONS on Fluid Mechanics, Vol. 2,No.1,pp.11-19.

http://www.worldses.org/journals/hmt/

 

23.  M.Gorji-Bandpy. and V.Ebrahimian ,(2007),"Exergy Analysis of the Steam Power Plant – A Case study in Iran" ,International Journal of Exergy, Vol.4, No.1, pp.54-73. 

http://www.inderscience.com/info/inarticle.php?artid=11579

 

22. M.Gorji-Bandpy, D.D.Ganji, and S. Soleimani ,(2007), "New Application of He's Homotopy  Perturbation Method", Int. Journal of Nonlinear Sciences and Numerical Simulation ,  Vol.8, No.3, pp. 319-328.

http://www.degruyter.com/dg/viewarticle/j$002fijnsns.2007.8.3$002fijnsns.2007.8.3.319$002fijnsns.2007.8.3.319.xml;jsessionid=EF995410CEBC6DDC66359B635D8BAAE5

 


2006



21.M. Gorji-Bandpy. and V.Ebrahimian,(2006),"Exergoeconomic Analysis of Gas Turbine Power Plants", International Energy Journal, Vol.7, No.1, pp.57-68.

http://www.doiserbia.nb.rs/Article.aspx?id=0354-98361100010G&AspxAutoDetectCookieSupport=1#.VHrrzdKUdic

 

20.  M.Gorji-Bandpy, and M.Rostamian,(2006),"Analyzing the influences of different parameters on terminal deposit velocity in hydrate slurry", International Journal of Fluid Dynamics (IJFD),Vol.2, No.1,pp. 99-109.

http://connection.ebscohost.com/c/articles/24893468/analyzing-influences-different-parameters-terminal-deposit-velocity-hydrate-slurry

 

19. M.Gorji-Bandpy , A.A.Bastani and N.Qorbani,(2006),"A new design of domestic gases storage water heater to increase heat efficiency", International Journal of Applied Engineering Research(IJAER),Vol.1, No.1, pp. 87-97.

http://www.ripublication.com/Volume/ijaerv1n1.htm

 

18. V.Ebrahimian, M.Gorji-Bandpy. and D.D.Ganji,(2006), "The Influences of Ambient Temperature on Steam Power Plant", WSEAS TRANSACTIONS on Heat and Mass Transfer, Vol.10, No.1,pp. 755-763.

http://www.worldses.org/journals/hmt/

 

17.  M.Gorji-Bandpy, V. Ebrahimian and D.D. Ganji,(2006)," Numerical Study of the Effect of  Water Particles on the Evaporation of Water Spray Cooling", WSEAS TRANSACTIONS on Fluid Mechanics,Vol. 12,No.1,pp. 1017-1028. 

http://www.worldses.org/journals/hmt/




2005



16.  K.Hooman and M.Gorji-Bandpy,(2005),"Laminar Dissipative Flow in a Porous Channel Bounded by Isothermal Parallel Plates", Journal of Applied Mathematics and  Mechanics,Vol.26,No.5, pp. 587-593.

http://link.springer.com/article/10.1007%2FBF02466332

 

15. M.J.Ebadi and M.Gorji-Bandpy,(2005), "Exergetic Analysis of Gas Turbine Plants", International Journal of Exergy ,Vol.2,No.1, pp. 31-39. 

http://www.inderscience.com/info/inarticle.php?artid=6431

 

14. K. Hooman and  M.Gorji-Bandpy,.,(2005), "Heat Transfer to laminar dissipative flow in a duct filled with saturated porous medium", Journal of Applied Mathematics and Mechanics, Vol.26, No.7, pp.25-32.

http://link.springer.com/article/10.1007/BF02466332?no-access=true




2004



13. K.Hooman and M.Gorji-Bandpy,, (2004), "Effects of Viscous Dissipation on Forced Convection in a Porous Saturated Duct with a Uniform Wall Temperature",Heat Transfer Research Journal,Begell House Ins.,Vol.35,Nos.7 & 8, pp. 588-596.

http://dl.begellhouse.com/journals/46784ef93dddff27,10c426844f7b559c,7f26d6bc28e1c29a.html

12.M. Gorji-Bandpy and K.Hooman,(2004),"Controlling and discussion of the main factors of  rising and introution of the Caspian sea level",Caspian Journal of Environment and Sustainable Development,Vol.2,No.1,pp.1-10.

 

11.M. Gorji-Bandpy,(2004),"The Effects of Temperature on the Ray Gas Turbine Power Plant", Journal  of Iranian Society of Mechanical Eng.,Vol.12,No.33, pp. 15-20.

 

10.  K.Hooman and M.Gorji-Bandpy,,(2004), "Laminar Heat Transfer to a Highly Viscous Fluid Flow in Entrance Region of a Porous Saturated circular tube with Uniform Wall Temperature", International Journal of Engineering Sciences ,Vol.15,No.3, pp.61-66.

http://en.journals.sid.ir/ViewPaper.aspx?ID=80160




2003


9. K.Hooman,M.Gorji-Bandpy, and M.Mahdavi-Hezaveh, (2003), "Using a porous segment to increase Thermal Efficiency by converting Gas Enthalpy to Thermal Radiation in High Temperature Industrial Furnaces",Heat Transfer Research Journal,Begell House Ins.,Vol.34,Nos.5&6, pp.310-317.

http://dl.begellhouse.com/journals/46784ef93dddff27,576265bc39577c0e,487391917ab997f1.html


8. Hughes, T.G. and M.Gorji-Bandpy, (2003), "A new Joint Probability appraisal of flood risk", Proc. Instn. Civ. Engrs.Water, Maritime and Energy, Discussion, 148, pp.215-216.




2002


7. M.Gorji-Bandpy., and K. Mirnia ,(2002), "Evaluation of the accuracy of FSR and Gray Synthetic Unit Hydrograph in the North of Iran",Flood Defence ,Science Press, NewYork Ltd.,ISBN 1-880132-54-0,pp.479-484.

 

6. M.Gorji-Bandpy. (2002),"The effect of different parameters on the design of detention ponds in coastal regions", Journal of Engineering of Mazandaran University,Vol.1, No.1 ,pp.37-48.



2001


 5. M.Gorji-Bandpy, ,(2001), "Selection of design events in tidally affected pond systems", International Journal of Engineering, Vol. 14, No.2, pp. 163-172.

http://www.ije.ir/abstract/%7BVolume:14-Transactions:N-Number:2%7D/=203

 

4. M.Gorji-Bandpy,(2001), "A parametric study for identification the variables in tidally affected pond systems", International Journal of Engineering, Vol. 14, No.2, pp.173-185.

http://en.journals.sid.ir/ViewPaper.aspx?ID=37509

 

3. M.Gorji-Bandpy, ,(2001), "The Joint Probability method of determining the return period of detention pond peak level in coasted regions", International Journal of Science and Technology, Transaction B.Vol.25, No.B4, pp.599-610.

http://ijstc.shirazu.ac.ir/article_1117_165.html




2000


  

2. M. Gorji-Bandpy, .,(2000), "A comparison study between the Joint Probability approach and Time Series Rainfall in coastal detention pond analysis", International Journal of Engineering, Vol. 13, No.2, pp. 85-95.

 https://inis.iaea.org/search/search.aspx?orig_q=RN:32023774



   1997




1. Hughes, T. G., and M.Gorji-Bandpy, .,(1997), "The analysis of surface water detention pond for tidally affected detention outfalls", Proc. Instn.Civ. Engrs. Water, Maritime and Energy,124, pp. 202-211.

http://www.icevirtuallibrary.com/content/article/10.1680/iwtme.1997.29784

 

مقالات فارسی

1.       نغمه جمشیدی، مفید گرجی، (2010) ،" تکنولوژی کاهش صدا در موتورهای توربوفن" ، نامه مکانیک شریف، فصلنامه تخصصی کاربردی مهندسی مکانیک، سال سیزدهم، شماره 36، تابستان 1388، صفحه 20-24.

http://www.magiran.com/magtoc.asp?mgID=2610&Number=36

 

2.       توحید محمدی، مفید گرجی، وحید محمدی، (2010)، " بررسی عوامل تاثیرگذار فرآیند شست و شوی فراصوتی در میزان پاک کنندگی فلزات Al23 و ST37 به جهت بهینه سازی آن ها" ، مجله مهندسی انرژی و محیط زیست، سال 1 ، شماره 1 ، پاییز 1388، صفخه 73-88

 

3.       رضا نوری؛ مفید گرجی بندپی؛ داوود دومیری گنجی، بررسی عددی اثر میدان مغناطیسی بر انتقال حرارت اجباری نانوسیال در یک کانال سینوسی شکل، دوره 13، شماره 14- فوق العاده، اسفند 1392، صفحه 43-55

http://mme.modares.ac.ir/article_10588_210.html

 

4.       نازنین قدیمی، مفید گرجی و داود دومیری،(2012) ، شبیه­سازی سه بعدی چرخه بسته موتور گازسوز اشتعال جرقه­ای و بررسی اثر هندسه محفظه احتراق بر توان و آلایندگی،  فصلنامه علمی پژوهشی تحقیقات موتور ، شماره 28، پاییز 1391،صفحه 31-38.

http://www.engineresearch.ir/files/site1/user_files_3920b3/admin-A-10-1-103-ccf6ef3.pdf

 

5.       علی شکیبا  مفید گرجی، بررسی عددی جریان و انتقال حرارت فروسیال در مبدل حرارتی دولوله  ای، دوره 99، شماره 9- فوق العاده، اسفند 1392، صفحه 1-8.

http://webcache.googleusercontent.com/search?q=cache:DhWWim--cogJ:mme.modares.ac.ir/pdf_11929_e5d3e9dfcc1c5a46a64736a049fdffa0.html+&cd=1&hl=en&ct=clnk&gl=ir

 

6.       مفید گرجی مهدی محمودی فرشی بوستانی، حل عددی جریان ریز قطبی ضربانی خون در رگ ویسوالستیک و مقایسه با رگ صلب و الستیک، پذیرفته شده جهت چاپ در مجله علمی پژوهشی شریف، 1393

 

2) Papers presented at technical Meetings and International Symposium


English papers:

 

1.     M.Gorji-Bandpy"Monitoring of pollution and Assessment of Toxicity", paper presented in International Symposium on Air pollution, Hong Kong, 12-14 Sep.,1986, pp. 16-23.

 

2.      M.Gorji-Bandpy"Development of a conceptual model for assessing the air pollution", paper presented at one- day National Seminar on Development in Air pollution, University of Tehran, Iran, Oct.22, 1986, pp. 21-30.

 

3.      M.Gorji-Bandpy, "Analysis of Surface water detention ponds", paper presented of one-day International Seminar on ECO, Islamabad, Pakistan,Sep.8. ,1992, pp. 14-19.

 

4.      M.Gorji-Bandpy "The joint probability Method of Determining the flood return period of a tidally affected pond", First International Symposium on Flood defense (ISFD-1),  10-13 Sep.,2001, Castle,Germany.

 

5.      M.Gorji-Bandpy , K.Hooman and A.Ejlali , "Effects of heat exchangers and a new insight to renewable energy sources to be used in closed Brayton cycles in industrial and air-space utilizations", The 3rd Sc-ISME Conf.,Babol, Iran, June 2002,(in Farsi).

 

6.      M.Gorji-Bandpy, K.Hooman and A.Ejlali., "Discussion of using an air-derivative gas turbine in industrial applications" ,The 3rd Sc-ISME Conf.,Babol,Iran, June 2002,(in Farsi).

 

7.     M.Gorji-Bandpy,,K.Hooman and A.Ejlali "Automation of mounting extra tubes on Paykan and Peugeot cars in Iran-Khodro Co." , The 3rd Sc-ISME Conf.,Babol,Iran, June 2002 ,(in Farsi).

 

8.      M.Gorji-Bandpy , M.Mirnia and M.Maramaei, "Evaluation of Accuracy of Gray and FSR Synthetic Unit Hydrograph in North of Iran" , The 2nd International Sym. on Flood Defence(ISFD-2), Sep. 10-13,2002, Beijing, China.

 

9.      M.Gorji-Bandp, K.Hooman and M.Mahdavi-Hevazeh, "Using porous segment to increase thermal efficiency by converting gas enthalpy to thermal radiation in high temperature industrial furnaces" ,The 1st International Conference on Sustainable Energy, Planning and Technology in Relationship to the Environment, 14-16 May, 2003, Halkidiki,Greece.

 

10.   Ebadi.M.J and M.Gorji-Bandpy,"Exergoeconomic analysis of Gas Turbine power plants", The 2nd International Exergy,Energy and Environment Symposium(IEEES2),3-7 July, 2005, Kos, Greece.

 

11.  M.Gorji-Bandpy Mirsadeghi and V.Ebrahimian , "Analysis of pipe breaks in urban water distribution networks – three case studies in Iran", 26-29 Oct.,2005,Riodoganiro ,Brazil.

 

12.  M.Gorji-Bandpy, A.A.Bastani  and N.Jamshidi-Alashti ,"Numerical analysis of fluid flow in duct around perpendicular cylinder with triangle cross section obstacle" , Water Resources , Hydraulics and Hydrology ,12-14 May,2006, Chalkiada , Greece .

 

13.  M.Gorji-Bandpy and V. Ebrahimian ,"Exergy Analysis of Boiler of the steam Power Plant- Case Study in Iran" ,  25-29 June,2006,Ontario,Canada.

 

14. M.Gorji-Bandpy E.Mohseni and M.Jannatabadi, "A numerical investigation of a two dimensional flow in in-lined circular tubes with elliptic vortex generator" , Heat Transfer 2006,5-7 July, 2006, The New Forest, U.K.

 

15.  M.Gorji-Bandpy,  A.A.Bastani , T.Gorji and N.Jamshidi-Alashti , "Flow Characteristics in cross flow heat exchangers using cylindrical tubes and triangle vortex generator" , The 4th WSEAS Int. Conf. on Heat Transfer , Thermal Engineering and Environment , 21-23August, 2006 , Crete Island , Greece.

 

16.  M.Gorji-Bandpy and T.Gorji, "The Influences of  Velocity on Pressure Losses in hydrate slurry" , The 4th IASME Int. Conf. on Fluid Mechanics and Aerodynamics,21-23 August, 2006 , Crete Island , Greece.

 

17.   M.Mostofi, A.H.Shamekhi and M.Gorji-Bandpy"Developing an Algorithm for Sl Engine Diagnosis Using Parity Relations" , International Conference on Modeling and Simulation (AMSE06), 28-30 August ,2006, Konya, Turkey.

 

18.  M.Mostofi, A.H.Shamekhi and M.Gorji-Bandpy,"Modified Mean Value Sl Engine Modeling (EGR Included)" , International Conference on Modeling and Simulation (AMSE06), 28-30 August,2006, Konya, Turkey.

 

19.  M.Gorji-Bandpyand E.Mohseni, "A numerical study of flow in circular tube heat exchanger with elliptic vortex generator", BRASLI –NOCMAT 2006- Salvador, Oct.29- Nov.1, 2006, Bahia, Brasil.

 

20.  M.Gorji-Bandpy M.Mirsadeghi and V.Ebrahimian, "Analyzing the influences of different parameters on settling velocity in hydrate slurry" , The 6th Int. Symposium on Stratified Flows , 11-14 Dec.,2006 , Perth, Australia.

 

21.  M.Mirsadeghi , A.A.Ranjbar and M.Gorji-Bandpy, "Two Numerical Methods for estimation of initial Temperature Profile in an Inverse Heat Conduction problem for a polymer process" , Inverse Problems , Design and Optimization Symposium (IPDO-2007), 16-18 April,2007,Miami , Florida , U.S.A.

 

22.   A.Bagheri , T.Karimi , M.Gorji-Bandpy and A.Kazemi , "An Adaptive Design of Mechanical Neural-Net Controller System for an Underwater Vehicle using Algorithm Genetic Systems" , The 15th International Symposium on Mechanical Engineering (ISME2007) , 14-16 May , 2007 , AmirKabir Univ. , Tehran , Iran.

 

 23.  M.Gorji-Bandpy and F.Hosseinnejad, " Pressure and Heat Transfer in staggered arrangement circular tubes with airfoil vortex generator ", 21st  Canadian Congress of Applied Mechanics, Ryerson University, Department of Mechanical and Industrial Engineering, 3-7 June,2007, Toronto, Canada.

 

24.  M.Gorji-Bandpy and E.Hosseinzadeh, "Numerical Analysis of Steady State Fluid Flow in a Two – Dimensional wavy channel", 13th Int .Conference on Emerging Nuclear Energy Systems (ICENES 2007) ,3-8 June , 2007, Istanbul, Turkey.

 

25.  M.Gorji-Bandpy and F.Fouladi , "Ambient Temperature Effects on Gas Turbine power plant : A case study in Iran" ,The third Int. Exergy , Energy and Environment Symposium (IEEES3) , 1-5 July ,2007, Evora,Portugal.

 

26.  M.Gorji-Bandpy, and M. Nimafar, "Comparison Between the Perturbation Expansion Method and the Numerical Method in Plane Couette Flow with Variable Viscosity",  IC-NOCMAT2007Maceio, International Conference on Non-Conventional Materials and Technologies: Ecological Materials and Technologies for Sustainable Building, 14-17 Oct. 2007, Maceio, Alagonas, Brazil.

 

27.  S.Sadighi, M.Gorji-Bandpy N. Haghparast and D. Ganji, "Large Deflection of a Cantilever Beam under point Load: A Survey by HPM", International Symposium on Non linear Dynamics, 27-30 Oct., 2007,China.

 

28.  A. Sadeghi, D.D. Ganji ,M.Gorji-Bandpyand N. Tolou, "Numerical Simulation of Heat- like Models with Variable coefficients by VIM", International Symposium on Non linear Dynamics, 27-30 Oct., 2007, China.

 

29.  M.Gorji-Bandpy and S.Soleimani, "Numerical Analysis of Fluid flow in a duct around perpendicular cylinder with triangle cross section obstacle", Second GMSARN International Conference, 12-14 Dec., 2007, Pattaya, Thailand.

 

30.  M.Gorji-Bandpy, M.Famouri and A.Mohsenzadeh, "An Analysis of two approximate techniques for solution of Simple Pendulm equation", Second GMSARN International Conference, 12-14 Dec., 2007, Pattaya, Thailand.

 

31.  M.Gorji-Bandpy, S.Soleimari and F.Hosseinnejad, "Pressure and Heat Transfer in staggered Arrangemnt circular Tubes with airfoil vortex Generator", Second GMSARN International Conference, 12-14 Dec., 2007, Pattaya, Thailand.

 

32.  M.Gorji-Bandpy,, M. Famouri and F. Gholipour, "Numerical Investigation of Flow through Convergent or Divergent Channel with FDM", Second GMSARN International Conference, 12-14 Dec., 2007, Pattaya, Thailand.

 

33.  M.Gorji-Bandpy.and T.Gorji, "Analysis of Pipe Breaks in Urban Water Distribution networks,Three case studies in Iran", Second GMSARN International Conference, 12-14 Dec., 2007, Pattaya, Thailand.

 

34. M.Gorji-Bandpy,"A Comparison study Between the Joint Probability Approach and Time Series Rainfall Modeling in Coastal Detention Pond Analysis", 4th International Symposium on Flood Defense, Managing Flood Risk, Reliability and Vulnerability, 6-8 May 2008, Toronto, Canada.

 

35.  H.Bararnia,  M.Gorji-Bandpy,and G.Domairy, "An Analytical Study of Boundary Layer Flows on a Continues Stretching Surface", Second International Inter disciplinary Chaos Symposium CCS 2008, 7-10 May,2008, Istanbul University, Turkey.

 

36.  M.Gorji-Bandpy., D.D. Ganji and S.Soleimani, "The effect of variations of intake pressure and temperature on a Heavy Duty Diessel Engine", Applied Fluid Mechanics(AFM 2008), 10-12 May, 2008, Southampton, England.

 

37.  M.Gorji-Bandpy, D.D.Ganji and S.Soleimani, "An Investigation on the Behaviour of Different Injection Angle on a Heavy Duty Diesel Engine",LAA Conference,July 2008,Portugal.

 

38.  N.Ghorbani, M.Gorji-Bandpy,and H.Taherian, "Experimental Study of Mixed Convection  Shell-and-Coil Heat Exchanger", 2008 ASME Summer Heat Transfer Conference, 10-14 Aug.,2008,USA, Vol.2, 2009, pp. 129-135.

 

39.  N.Ghorbani, H.Taherian and M.Gorji-Bandpy,, "Designing Shell-and-Coil Mixed Convection Heat Exchanger", 2008 ASME Summer Heat Transfer Conference,10-14 Aug.,2008,USA.

 

40.  M.Gorji-Bandpy,, D.D.Ganji and S.Soleimani, "Injection Timing and Cone Angle Behaviour on a Heavy Duty Diesel Engine", WSEAS Conference,Aug.,2008, Greece.

 

41.  M.Gorji-Bandpy, and S.Soleimani, "An Investigation on the behavior of different injection angle on a heavy duty diesel engine", The Third GMSARN International Conference2008, Nov.12-14,2008,Kunming, China.

 

42.  H.TaherianM.Gorji-Bandpy, and M.Nimafar,"Design Improvement of Circular Packed Vertical  Bed Paddy Dryer", Fourth Int. Conference on Energy Research and Development(ICERD-4), 17-19 Nov.,2008,Kuwait.

 

43.  M.Gorji-Bandpy, S.Soleimani, and N. Molana, “Exergy Analysis of a Steam Plant in Iran”, Asia-Pacific, Consultations on Climate Regime Beyond 2012, Bangkok, Thailand, 7-8 August 2008.

 

44.  M. Gorji-Bandpy,   A.A. Bastani, and N. Qorbani, “A New Design of Domestic Gases Storage Water Heater to Increase Heat Efficiency”, Asia-Pacific, Consultations on Climate Regime Beyond 2012, Bangkok, Thailand, 7-8 August 2008.

 

45.  F.Fouladi, M.Gorji-Bandpy,,H.Taherian and M.Khademi,"Experimental Investigation on a Typical Integrated Collector Storage Solar Water Heater", International Conference on Environment 2008,15-17 Dec.2008,Malaysia.

 

46.  N. Jamshidi, and M.Gorji-Bandpy,., "A bibliographical review of noise reduction technologies in turbofan engines", 8thIranian Aerospace Society Conference, 17-19 Feb.2009, Malek-Ashtar University of Technology, Tehran, Iran.

 

 

47.  E.Hosseinzadeh, H.Taherian and M.Gorji-Bandpy,,"Evaluation of Cooling Potential of ERA 2009 Clear Night Sky",Int. Conf. on Emerging Research and Advances in Mathematical  Engineering,, 19-21 March,2009,Chennari,India.

 

48.  F.Fouladi,H.Taherian, and M.Gorji-Bandpy,, "Integrated Collector and Storage System For Mild Climates", 4thCanadian Solar Buildings Confernce,June 25-27,2009,Toronto,Canada.

 

49.  M.Gorji-Bandpy,.,and H.Soltanzadeh, "The Study of events in water distribution networks and how to control and decrease the events in three cities in Mazandaran province, north of Iran", Int.Conf. on Water Resources, ICWR2009,16-18 Aug.2009,Shahrood,Iran,pp.326-333.

 

50.  G. Javadirad, Ahmad Al-Semed, M.Keshavarz, H. Safari, andM.Gorji-Bandpy., "Knock Occurrence Prediction by Means of Chemical Kinetics in Heavy Duty Dual-Fuel Engines", 26th CIMAC World Congress on Combustion Engine Technology, 14-17 June, 2010,Bergen, Norway.

 

51.  G. Javadirad,.M.Gorji-Bandpy,. Keshavarz, and A. Jazayeri, "Multi-Zone Spray Modeling: Useful method to optimize injection parameters of a Heavy Duty Diesel Engine", 26th CIMAC World Congress on Combustion Engine Technology, 14-17 June, 2010, Bergen, Norway.

 

52.  F. Noori, M.Gorji-Bandpy,, and A. Kazemi, "Thermodynamic optimization of ideal turbojet with afterburner engines", 7th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics( HEFAT2010),19-21 July ,2010, Antalya, Turkey.

 

53.  H. Naeimi, M.Gorji-Bandpy, D.D. Ganji, and M. Keshavarz, " Analysis of Design Parameter of compact junction using Computational Fluid Dynamics", 7th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics( HEFAT2010), 19-21 July ,2010, Antalya, Turkey.

 

54.  E. Sourtiji, M.Gorji-Bandpy, and F. Hosseinizadeh, "Numerical Study of Laminar Mixed Convection of a Nano fluid in a square cavity with Inlet and Outlet ports", 5th International Conference on Advances in Mechanical Engineering and Mechanics, 18-20 Dec., 2010, Hammamet, Tunisia.

 

55.  M.Rostamani, M. Gorji-Bandpy, and F. Hosseinizadeh, " Numerical Study of Turbulent forced convection of water-based nanofluid considering variable properties", 5th International Conference on Advances in Mechanical Engineering and Mechanics, 18-20 Dec., 2010, Hammamet, Tunisia.

 

56.  F. Noori, M. Gorji-Bandpy, and A.Kazemi, "Multi-Objective Thermodynamics Optimization  of Ideal Turbojet with afterburner engines using Non-Dominated Sorting Genetic Algorithm II", Amsterdam, International Conference on Aerospace, Propulsion and Energy Sciences, 28-30,Sep., 2010, Amsterdam, The Netherlands.(www.waset.org)

 

57.  M. Gorji-Bandpy, and M. Kazemi, "Computational Investigation of Air-Gas Venturi Mixer for Powered Bi-Fuel Diesel Engine", World Academy of Science, Engineering and Technology, 24-26 July, 2010, Venice, Italy. (www.waset.org)

 

58.  M. Gorji-Bandpy, and H. Sajjadi, "An Experimental Study of the Effect of Coil Step on Heat Transfer Coefficient in Shell-Side of Shell-and-Coil Heat Exchanger", World Academy of Science, Engineering and Technology, 24-26 July, 2010, Venice, Italy. (www.waset.org)

 

59.  M. Rostamani, F. Hosseinizadeh, and M.Gorji-Bandpy"Numerical Investigation of Heat and Mass Transfer in Concentric annulus using nanofluid", 13th Annual and 2nd International Fluid Dynamics Conference. (www.fd2010.ir)

 

60.  D.D. Ganji, M. Gorji-Bandpy, and M. Mostofi, " HPM Based Simulation of Poisson-Boltzmann Equation with Zeta Potential", The 3rd Int. Symposium on Non-linear Dynamics, 18-28 Dec., 2010, Shanghai, China. (www.isnd2010.com)

 

61.  M. Mostofi, D.D Ganji, and M.Gorji-Bandpy" Investigating the Temperature effect on velocity profile in Elektroosmotics Driven Nano-Channel", 6th Nanoscience and Nanotechnology Conference, 15-17 June, 2010, Izmir, Turkey, pp. 364-369.

 

62.  M. Mostofi, D.D Ganji, and M.Gorji-Bandpy"Analytical Solution of an Electrokinetic Flow in a Nanochannel Curvilinear Coordinates", 6th Nanoscience and Nanotechnology Conference, 15-17 June, 2010, Izmir, Turkey, pp. 681-687.

 

63.  M. Mostofi, D.D Ganji, and M. Gorji-Bandpy"Electrokinetic Flow  Modeling in a Porous Nanochannel using Curvilinear Coordinates", 6th Nanoscience and Nanotechnology Conference, 15-17 June, 2010, Izmir, Turkey, pp. 695-697.

 

64.  M.Gorji-Bandpy, D.D Ganji, and M. Mostofi, "Variable Physical Properties Effect on Velocity and Potential Distribution in a Nanotube with Large Zeta Potential", TNT 2010 Conference, Madrid, Spain.

 

65.  M. Mostofi, D.D. Ganji, and M.Gorji-Bandpy, " Analytical Solution of Electrokinetic Flow in a Nanotube With Complex Fluid", Advances in Applied Physics and Materials Science Congress, 12-15 May 2011, Antalya, Turkey.

 

66.  M. Mosofi, D.D. Ganji, and M.Gorji-Bandpy, " Simulation of Electrokinetic Phenomena in Nanochannel with Complex Fluid", Conference Dynamics of Complex Fluid, 5-7 May, 2011, Iasi, Romania.

 

67.  D.D. Ganji, M.Gorji-Bandpy, and M.Mostofi, "Numerical Simulation of Electrokinetic Flow in a Nanotube with Variable Physical Properties", 2011 International Conference on Electric and Electronics (EEIC 2011), 20-22 June 2011, Nanchang, China.

 

68.  H. Sajjadi, M.Gorji-Bandpy and G.H. Kefayati, " Simulation of Natural Convection Flow in an Inclined Open Cavity Using Lattice Boltzman Method", ICME2011: International Conference on Mechanical Engineering, Paris, France, July 27-29, 2011.

 

69.  D.D. Ganji, M.Gorji-Bandpy, and M. Mostofi, " Study of Electroosmotic Flow in a Nanotube With Power Law Fluid",The 2011 International Conference on Mechanical and Aerospace Engineering (ICAMAE 2011), Bangkok, Thailand , July 29-31, 2011.

 

70.  M.Gorji-Bandpy, and A. Zahedi-Tajrishi, "Numerical Simulation of the Supersonic Flow over Forward –Facing Step in Micro Couette Flow using Direct Simulation Monte-Carlo Method", 4th International Symposium on Heat Transfer and Energy Conversions, Guangzhou, Jan.6-9,2012, China.

 

71.  H. Sajjadi, M.Gorji-Bandpy, D.D. Ganji, R. Kefayati, and M. Shayania, "Numerical Analysis of Turbulent Natural Convection in Square Cavity using Large Eddy Simulation in Lattice Boltzman Method", 7th International Chemical Engineering Congress and Exhibition, Kish, Iran, 21-24 Nov. 2011.

 

72.  M. Zadsar, and M.Gorji-Bandpy,"An Investigation of Engine Exhaust Gases as an Energy Source with the Exergy Analysis", ISTP-22 Conference, Aula Contre , Delft, 8-11 Nov. 2011, The Netherlands.

 

73.  S.F. Hosseinizadeh, M.Gorji-Bandpy, "The Impact of Mass Flow and Masking on the pressure drop of Air Filter in Heavy-Duty Engine", Experimental Fluid Mechanics 2011, Tu Liberec, Czech Republic, November 22-25, 2011.

 

74.  R. Kefayati, and M.Gorji-Bandpy, “ Simulation Inclination Angle on Natural Convection in Enclosure Filled with Cu-Water Nanofluid by Lattice Boltzman Method”, 2012 International Conference on Fluid Mechanics, Heat Transfer and Thermodynamics, Zurikh, Switzerland, Jan. 15-17, 2012.

 

75.  R. Saghatchi, M.Gorji-Bandpy, J. Ghazanfarian, “Water Impact and Sedimentation of Solid bodies in a Newtonian Fluid using SPH Method”, International Conference of Mechanical Engineering and Advanced Technology, 10-12, Abbasi International Hotel, Isfahan, Iran.

 

76.  M. Seyyedi, D. D. Ganji, M.Gorji-Bandpy, "Flow and Heat transfer due to different thickness an length of a splliter behind a cylinder in a plane channel", 14th conference on Fluid Dynamics(CFD 2012), The university of Birjand, Mechanical Engineering Department, 1-3 may 2012.

77.  Sady Tavakoli, M.Gorji-Bandpy, Davood Domiri, Ghasem Javadirad, Nazanin Ghadimi, "The Investigation Of Intake Valve Close Timing On The Heavy Duty Gas Engine", INTERNATIONAL COUNCIL ON COMBUSTION ENGINES, CIMAC Congress 2013, PAPER NO: 295.

78.  Nazanin Ghadimi, Sady Tavakoli, M.Gorji-Bandpy, Davood Domiri, Ghasem Javadirad, " The investigation of Spark Plug Position and number on the Spark Ignition Combustion performance", INTERNATIONAL COUNCIL ON COMBUSTION ENGINES, CIMAC Congress 2013, PAPER NO: 297.

79.  Ahmad Khosravi, M.Gorji-Bandpy, " Optimization of Gas Turbine Model (KWU V94.2) Siemens by using PSO and GA for reducing CO2 and NOx emission based on exergy and economic analysis.", 3rd Conference on Emerging Trends in Energy Conservation, 2013.

80.  M Nasiri-Lohesara, M.Gorji-Bandpy, " A Comparison study of two-phase model in turbulent heat transfer using nanofluids as a coolant in a heat exchanger.", National Conference on Energy Consumption Optimization Sciences and Engineering, 2014.

81.  M. Rahimi-Gorji, O. Pourmehran, A.K. Rostami, M.Gorji-Bandpy, " Thermal Analysis of a fin with power-law temperature-dependent thermal conductivity and heat transfer coefficient using numerical method.", National Conference on Developing of Civil Engineering, Architecture, Electricity, and Mechanical in Iran. 2014.

82.  M. Rahimi-Gorji, O. Pourmehran, M.Gorji-Bandpy, TB. Gorji, " Application of Lagrangian particle tracking of drug delivery through realistic model of human airways in different breathing conditions", The 2nd National Conference on the Development of Engineering  Sciences, 2015.

83. O. Pourmehran, M. Rahimi-Gorji,  M.Gorji-Bandpy, TB. Gorji, "Magnetic drug targeting through tracheabronical airway based on CT-scan images by discrete phase model", The 2nd National Conference on the Development of Engineering  Sciences, 2015.


مقالات فارسی کنفرانسی

1.   مفيد گرجي، كامل هومن، آرش اجلالي ، "تاثير مبدل‌هاي حرارتي و نگرشي جديد بر منابع مختلف انرژي قابل دسترسی در سيكل برايتون بسته در مصارف زميني و فضايسومین کنفرانس دانشجویی انجمن مهندسین مکانیک ایران، دانشگاه صنعتی نوشیروانی بابل، 9-7 آبان 1381.

 

2.    مفيد گرجي، كامل هومن، آرش اجلالي ، "اتوماسيون نصب لاستيك زاپاس اتومبيل‌هاي پيكان و پژو براي خط توليد شركت ايران خودروسومین کنفرانس دانشجویی انجمن مهندسین مکانیک ایران، دانشگاه صنعتی نوشیروانی بابل، 9-7 آبان 1381.

 

3.     مفيد گرجي، كامل هومن، آرش اجلالي ، " بررسي امكان‌ سنجي استفاده از يك توربين گاز هوايي براي مصارف زميني و ديدبانيسومین کنفرانس دانشجویی انجمن مهندسین مکانیک ایران، دانشگاه صنعتی نوشیروانی بابل، 9-7 آبان 1381.

 

4.     احمد باقري، توحيد كريمي، مفيد گرجي، آدمين كاظمي، "طراحي كنترلر تطبيقي براي يك ربات پويشگر زيرآبي با استفاده از شبكه‌هاي عصبي و الگوريتم ژنتيكپانزدهمين كنفرانس سالانه بين‌اللملي مهندسي مكانيك ISME 2007، دانشگاه صنعتي اميركبير، 25 تا 27 ارديبهشت 1386.

 

5.    مفيد گرجي، حسام طاهريان، محمد نيمافر، "بررسي تجربي منحني كاهش رطوبت در دستگاه خشك‌كن شالي بستر عمودي گرش و به دست آوردن حالت بهينه"، شانزدهمين كنفرانس بين‌المللي مهندسي مكانيك ISME 2008، كرمان- دانشگاه شهيد باهنر، 24 تا 26 ارديبهشت 1387.

 

6.    قاسم جوادی، بهرام جعفری، مصطفی میرسلیم، مفید گرجی ، ارسطو سپهری ، “روند پیشرفت موتورهای گازسوز در سال های اخیر و فناوری های نوین افزایش بازده موتورها “، اولین کنفرانس ملی گاز طبیعی فشرده(سی. ان. جی)، ایران-تهران-هتل المپیک ، آبان 1387.

 

7.    توحید محمدی، مفید گرجی، وحید محمدی، "بررسی آزمایشگاهی شستشوی قطعات صنعتی به روش فراصوتی با اثرات پدیده کاویتاسیون"، دوازدهمین کنفرانس دینامیک شاره­ها، بابل، دانشگاه صنعتی نوشیروانی، 8 تا 11 اردیبهشت 1388.

 

8.    مجید خراقانی، مفید گرجی، داوود دومیری، فواد نوری، قاسم جوادی راد، " بهینه سازی سوخت مصرفی ایستگاه تقویت فشار با چند نوع کمپرسور در خط لوله گاز طبیعی"، هجدهمین همایش سالانه بین المللی مهندسی مکانیک، دانشکده مهندسی مکانیک، دانشگاه صنعتی شریف، تهران، 11-13 اردیبهشت 1389.

 

9.      فواد نوری، مفید گرجی، آدمین کاظمی، مجید خراقانی، " بهینه سازی ترمودینامیکی موتور توربوجت با پس سوز با چند تابع هدف توسط الگوریتم ژنتیک"، هجدهمین همایش سالانه بین المللی مهندسی مکانیک، دانشکده مهندسی مکانیک، دانشگاه صنعتی شریف، تهران، 11-13 اردیبهشت 1389.

 

10.    رضا کفایتی ، سید فرید حسینی زاده ، مفید گرجی ، حسن سجادی "بررسی انتقال حرارت جا بجایی آزاد نانو سیال آب / با روش شبکه ی بولتزمن در یک حفره ی مربعی" نوزدهمین همایش سالانه بین المللی مهندسی مکانیک در دانشگاه بیرجند ،22-20 اردیبهشت 1390    


11.     مفید گرجی ، محمد حاتمی ، آرمان حسن پور ، نوید خادم زاده "تاثیر ارتفاع و زاویه ی حمله بر ضریب فشار سطوح یک آیروفویل در نزدیکی سطح زمین" اولین کنفرانس ملی آیرودینامیک و هیدرودینامیک در دانشگاه صنعتی شریف ، 26-22 مهر 1391


12.     مفید گرجی ، محمد حاتمی ، آرمان حسن پور ، رضا نوری "پدیده ی یخ زدگی در هواپیما ها و راه های مقابله با آن" اولین کنفرانس ملی آیرودینامیک و هیدرودینامیک در دانشگاه صنعتی شریف ، 26-22 مهر 1391


13.     محمد زادسر، مفید گرجی "بررسی ترمودینامیکی به کارگیری سامانه سی اچ پی در یک موتور احتراق داخلی و تحلیل یک نمونه ی آزمایشگاهی" اولین کنفرانس انتقال حرارت و جرم ایران در دانشگاه سیستان و بلوچستان 23-21 شهریور 1391


14.     سید مصطفی سیدی ، محسن شیخ الاسلامی ، داوود دمیری گنجی ، مفید گرجی بندپی "بررسی انتقال حرارت جابجایی آزاد و با روش شبکه ی بولتزمن در یک حفره ی مربعی با دیواره ی خمیده" چهارمین کنفرانس ملی کاربردی سی اف دی در صنایع شیمیایی و نفت در دانشگاه صنعت نفت 27 اردیبهشت 1391.


15.     نازنین قدیمی، مفید گرجی، داوود دومیری گنجی، "بررسی اثر عمق کاسه پیستون بر روی عملکرد موتور های گازسوز سنگین"، هفتمین کنفرانس دانشجویی مهندسی مکانیک ایران(STU 2013)، دانشکده مهندسی مکانیک،پردیس دانشکده های فنی، دانشگاه تهران، 3-1 اسفندماه 1391   


16.     سعدی توکلی، مفید گرجی، داوود دومیری گنجی، "بررسی اثر زمانبندی درچه ورودی بر روی عملکرد و آلایندگی موتور احتراق داخلی با سوخت گاز طبیعی"، بیست و یکمین همایش سالانه مهندسی مکانیک، دانشگاه صنعتی خواجه نصیرالدین طوسی، 19-17 اردیبهشت 1392


17.    نازنین قدیمی، مفید گرجی، داوود دومیری گنجی،" بررسی اثر موقعیت و تعداد شمع بر روی عملکرد موتور های اشتعال جرقه ای گاز سوز سنگین"، بیست و یکمین همایش سالانه مهندسی مکانیک، دانشگاه صنعتی خواجه نصیرالدین طوسی، 19-17 اردیبهشت 1392


18. مهدی میانسری، مفید گرجی، "بررسی مدل ای محیط پیوسته و پیوسته ی متخلخل در بررسی پدیده ی انتقال در جابجایی طبیعی در محیط متخلخل و بررسی فاکتور های موثر جهت بهینه نمودن مدل پیوسته ی متخلخل   . "، بیست و یکمین همایش سالانه مهندسی مکانیک، دانشگاه صنعتی خواجه نصیرالدین طوسی، 19-17 اردیبهشت 1392


19. رضا نوری، مفید گرجی ،داوود دومیری گنجی، "بررسی اثر تغییر زاویه میدان مغناطیسی بر انتقال حرارت اجباری نانوسیال در یک کانال سینوسی شکل"، پانزدهمین کنفرانس دینامیک شاره ها و بندر عباس. دانشگاه هرمزگان، 29-27آذر 1392


20. مهدی باقری، امید جهانیان، مفید گرجی "بررسی عملکرد یک موتور اشتعال تراکمی مخلوط همگن با سوخت هیدروژن"، هشتمین همایش بین المللی موتور های درونسوز و نفت . پژوهشگاه صنعت نفت، تهران ،ایران ، 30-28 بهمن.



21. رسول حسن خانی، طاهره گرجی، مفید گرجی، داوود دومیری گنجی، "مطالعه ی انرژی های تجدید پذیر اقیانوسی/دریایی در ایران"، علوم مهندسی ایده های نو. 21  اردیبهشت



22. آرمان قنواتی، سجاد خدادادی، مفید گرجی، داوود دومیری گنجی، "روش های دینامیک سیالات محاسباتی در شبیه سازی صعود یک حباب در یک سیال ساکن"، پنجمین کنفرانس ملی کاربرد CFD در صنایع شیمی و نفت . دانشگاه علم و صنعت ایران. 31  اردیبهشت



23. ادریس غنودی، مفید گرجی، "بررسی و بهینه سازی ایرکولر کندانسور فرعی نیروگاه شهید سلیمی نکا"، پنجمین کنفرانس صنعت نیروگاه های حرارتی . دانشگاه شهید بهشتی. 20-21   خرداد



24. اویس پورمهران، مفید گرجی، مهدی توانا، اکبر آقایی خسرقی "تحلیل عددی جریان سیال و انتقال حرارت در میکروکانال با پره های داخلی مختلف"، اولین کنفرانس سراسری توسعه محوری مهندسی عمران ، معماری، برق و مکانیک ایران . سالن همایشگاه های دانشگاه گلستان. 27 آذرماه 1393


25. مریم بائو، محمد رحیمی گرجی، مفید گرجی،  "بررسی تاثیر وجود هندسه مخروطی بر روی انتقال حرارت لوله"، اولین کنفرانس سراسری توسعه محوری مهندسی عمران ، معماری، برق و مکانیک ایران . سالن همایشگاه های دانشگاه گلستان. 27 آذرماه



26. پویا عزیزیان، مفید گرجی،داوود دومیری گنجی "شبیه سازی جریان خروجی از نازل سفینه فضایی با روش ترکیبی ذره ای-پیوسته"،   همایش یافته های نوین در هوافضا و علوم وابسته دانشکده ی علوم و فنون دانشگاه تهران. تابستان 1394
 
Supervised Dissertations and Theses

1) PhD Students



1.     مهدی مستوفی, مدل سازی جريان الکتروسينتيک در کانال های با مقياس بسيار کوچک,84. (فارغ التحصیل شده است)

 

2.     آدمين کاظمی, بهينه سازی چند هدفي مقاوم ترموديناميکی خارج از نقطه طراحی موتور توربوفن توسط الگوريتم ژنتيک و شبيه سازي مونت كارلوو84

 

3.     بهرام جعفری,86

 

4.     قاسم جوادی راد,86 پایش مراحل احتراق موثر گازسوز اشتعال تراکمی مخلوط همگن با بکارگیری لایه ای توضیغ دمای مخلوط همگن.

 

5.     مهدي ميانسري,88 مقایسه مدل های محیط پیوسته متخلخل در بررسی پدیده انتقال  در محیط متخلخل و بررسی فاکتور های موثر جهت این مدل.

 

 

2) MSc. Students

 

 

1.     عباسعلي محمد زاده سوته, ررسي و تحليل ضربه آب در ايستگاههاي پمپاژ به روش مشخصه ها,سال76

 

2.     مهرداد مشيري, بررسي عملکرد نيروگاه گازي و بررسي سيال در اطراف پره توربين سال76

 

3.     حسن اکبرزادگان نجار تحليل عددي جريان سيال غير قابل تراکم در کانال دو بعدي پره دار به روش حجم محدود سال 76

 

4.     کاظم جواهري, استفاده از طرح اتلاف مصنوعي ماتريسي در حل معادلات اويلر تراکم پذير حول برآمدگيها,سال77

 

5.     مريم سلمانپور,طراحی لوله تخليه درياچه جمع آوری آبهای سطحی در شهرهای ساحلی ,سال 78

 

6.     رضا بهرامی صالحلو, تحليل اگزرژی بويلر نيروگاه شهيد رجائی قزوين  , سال 79

 

7.     علیرضا اسدی, بررسی جریان سیال در توربین بادی و تهیه ی نرم افزار طراحی پروفیل پره,سال 79

 

8.     صادق برزگر, فرایند کنترل در سیستم کامپیوتری ,سال 79

 

9.     احسان جعفرنیا, بررسی علمی و تکنولوژیکی احداث نیروگاه های کوچک آبی در ایران ,سال 79

 

10. مشهد قلی مارامائی, بررسی و کالیبراسیون هیدروگراف های واحد مصنوعی GRAY و FRS در شیرگاه مازندران, سال 80

 

11. سید مصطفی عقیلی, بهینه سازی شبکه های توزیع آب ,سال 80

 

12. پیام امینی, بررسی آب به حساب نیامن ,سال 80

 

13. حميد مرادي, بررسي تحليلي غلظت در لوله ها و تاثيرات آن بر سرعت حد ته نشيني براي اسلاري هيدرات و مقايسه نتايج بدست آمده با نتايج عددي , سال 80

 

14. عليرضا ايماني, شناسائی پارامترهای يک سيستم حرارتی به روش انتقال حرارت معکوس (IHCP), سال81

 

15. سید آرش موسوی کنترل فعال توربولانس بوسیله ی نوسان سطح ,سال 81

 

16. محمد جواد عبادي,آناليز ترمواکونوميک اگزرژی نيروگاه قزوین, سال 81

 

17. سيد وحيد ابراهيميان شياده,مدلسازی دو بعدی پاشش آب در بخار فوق گرم خروجی از بويلر نيروگاه بخار, سال 82

 

18. محسن روزبهانی, تهیه ی نرم افزار طراحی هیدرولیکی شبکه های فاضلاب ,سال 82

 

19. نیما شهرزاد, بررسی حوادث و اتفاقات در لوله های آبرسانی شهری و روشهای کاهش آن ,سال 82

 

20. مهدی دیندار, بررسی حوادث و اتفاقات در شبکه آب آذربایجان و مقایسه ی آن با شهرهای مازندران , سال 82

 

21. محمد توکلی رستمی, جايابی بهينه منابع توليد پراکنده در شبکه های توزيع, سال 82

 

22. علیرضا صادقی پویا, طراحی حجم و مکانیابی دریاچه های مصنوعی جمع آوری سیلاب در شهرهای غیر ساحلی , سال 83

 

23. ونداد تعلیمی, تحلیل عددی کاویتاسیون در میکروکانالها , سال 84   

 

24. بهرام جعفری, طراحی مفهومی موتور ديزل با کاربرد دريايی جهت انتقال دانش فنی در طراحی موتور ملی, سال 84

 

25. سجاد سليمانی اميری, مدل سازی دو بعدی موتور ديزل با دو انژکتور پاشش, سال84

 

26. آرش هوشمند دره, طراحی و بهينه سازی شبکه مبدلهای حرارتی با استفاده از آناليز پنچ و الگوريتم ژنتيک, سال84

 

27. سعید دوست, بررسی عددی انتقال حرارت جابجایی همراه با تشعشع, سال84

 

28. شاهد اماميان , مدلسازی نفوذ و تبخير اسپری در جريان دو فازی, سال84

 

29. محمدابراهيم پور, کاربرد روشهای تحلیلی در بررسی جریان سیال غیر نیوتنی لزج مرتبه  چهارم در داخل کانال متخلخل ,سال85

 

30. الهام حسين زاده, شبيه سازی تجربی سيستم سرمايشی تشعشعی جهت خنک کردن فضا ,سال85

 

31. محمد میرصادقی تخمین پروفیل دمای اولیه در فرایند تزریق پلاستیک ,سال85

 

32. مازيار رستميان, بررسي تحليلي فين با سطح مقطع غير يكنواخت ورسانش گرمايي وابسته به دما ,سال85

 

33. فاما فولادی, تحليل تجربی عملکرد سيستم يکپارچه کلکتور خورشيدی و مخزن ,سال85

 

34. نيما نديم, بررسی اثر صفحات متقارن بر انتقال حرارت و جريان سيال در مبدل های حرارتی فشرده صفحه لوله ای ,سال85

 

35. حسن برار نيا, بررسی تحليلی انتقال حرارت در صفحه عمودی با محيط متخلخل همراه با توليد حرارت و انتقال جرم ,سال85

 

36. مجيد جاني پور خرقاني, بهينه سازی مصرف سوخت در ايستگاههای تقويت فشار در خط لوله انتقال گاز طبيعی ,سال86

 

37. مهدي كاظمي سنگسرکي, طراحي و بهينه سازي ميکسر و دريچه کنترل گاز براي موتور ديزل سنگين با سوخت گاز ترش, سال86

 

38. محمد نیمافر بهینه سازی سیستم خشککن شالی در بستر عمودی گردشی, سال86

 

39. ميثم حاجي بابائي, بهينه سازي سيستم خشک کن شالي بستر عمودي گردشي و کاهش مصرف سوخت با استفاده از انرژي خورشيدي ,سال86

 

40. حسام الدين نعيمي, تحلیل پارامترهای طراحی در یک اتصال چند راهه پودمانی (منيفولد دود)  ,سال86

 

41. فواد نوري, بهينه سازي ترموديناميکي موتور توربوجت باafterburner با چند تابع هدف توسط الگوريتم ژنتيک ,سال86

 

42. محمد جواد رستماني, بررسي عددي جريان و انتقال حرارت نانوسيال در لوله تحت شار حرارتي ثابت در رژيم درهم    ,سال86

 

43. احسان سورتيجي, تحلیل عددی جریان و انتقال حرارت ترکیبی نانوسیال در یك محفظه با دریچه‌های ورودی و خروجی ,سال86

 

44. سپيده حسين زاده, شبیه سازی اثر ارتفاع بر عملکرد موتور احتراق داخلی دیزل سنگین با استفاده از پوشش بر صفای هوای ورودی به روش دینامیک سیالات محاسباتی ,سال86

 

45. سهيل سليماني كوتنايي, بهينه سازي مكان منابع حرارتي در جريان دوبعدي جابه جايي آزاد در درون يك محفظه بسته بوسيله الگوريتم ژنتيك ,سال86

 

46.    آرش قجرجزي, بررسي جريان آرام در داخل كانال با موانع با ضرايب انسداد و هندسه هاي مختلف به كمك روش عددي مستقل از شبكه ,سال86

 

47. صادق گلچوبی, بررسی علل حوادث و اتفاقات شبکه ی آب شهری آمل به کمک سیستم GIS, سال 87

 

48. علی مطعیی راد, تحلیل جریان سیال غیر نیوتنی در یاتاقان های غیر هم مرکز, سال 87  

 

49. ناصر میانرودی بررسی تجربی انتقال حرارت جابجایی اجباری سمت پوسته مبدل های مارپیچی , سال87

 

50. محمد زادسر, بررسی قابلیت کاردهی دود موتور احتراق داخلی جهت بکارگیری در سامانه سرمایشی ,سال88

 

51. حسن سجادي, تحلیل عددی جریان جابجایی آزاد مغشوش در حفره مربعی با استفاده از روش شبکه بولتزمن, سال88

 

52. غلامرضا كفايتي,تحلیل عددی رفتار انواع نانوسیال در حفره‌های بلند با استفاده از روش شبکه بولتزمن ,سال88

 

53. علي چاوشي, استفاده بهینه از انرژی گرمایی موجود در آب نواحی جنوبی دریای خزر در تولید برق ,سال88

 

54. سيدمصطفي سيدي تاجی, تاثیر جداساز بر انتقال حرارت جابجایی اجباری دو بعدی حول سیلندر مربعی زاویه‌ای با استفاده از روش شبکه بولتزمن ,سال88

 

55. جواد كشاورزيان, انتقال حرارت جابجایی ترکیبی حول سیلندر مربعی زاویه‌ای با آرایش سری دوگانه در رینولدز پایین با استفاده از روش شبکه بولتزمن ,سال88

 

56. محمد علی نیا, تحلیل عددی جریان جابجایی ترکیبی نانو سیال در حفره ی مایل مدل مخلوط دو فازی, سال 88

 

57. امین زاهد تجریشی, بررسی عددی جریان تراکم پذیر میکروکوئت با استفاده از روش شبیه سازی مستقیم مونت کارلو, سال 90

 

58. میرشریف نوربخش آهنگرکلایی , بررسی کمی و کیفی رودخانه ی سیاه رود و عوامل آلوده کننده و راه های کنترل آن, سال 75 (دانشگاه آزاد قائمشهر)

 

59. سید حسین مرادی تپه کلائی, ارزیابی اقتصادی نیروگاه برق آبی کوچک در استان مازندران, سال 78 (دانشگاه علوم و فنون مازندران)

 

60. مهدی مردانی راد, بررسی عوامل تخریب پلها و پایدارسازی آنها در مقابل سیلاب(مطالعه ی موردی در استان گلستان) , سال 81 (دانشگاه علوم و فنون مازندران)


61. حمید رضا شرکت یگانگی, بهینه سازی مصرف انرژی در دپارتمان پخت سیمان , سال 88 (دانشگاه آزاد واحد علوم تقحقیقات)

62. رضا نوری, مدلسازی جریان نانوسیال و بررسی انتقال حرارت در یک کانال موجی شکل تحت میدان مغناطیسی بوسیله OpenFOAM,سال90



 
Research Projects
 
Back to top