Mousa Farhadi

Mousa Farhadi

موسی فرهادي
Email:  mfarhadi[at]nit.ac.ir
Website:  http://mousafarhadi.ir

Professor

Contact

Department of Thermo Fluids, Faculty of Mechanical Engineering

Babol Noshirvani University of Technology, P.O. Box 484, Babol, Iran.

Tel : +98 111 3234205 ( Internal 1325 )  Fax : +98 111 3234205 & +98 111 3212268

Persian CV : http://mec.nit.ac.ir/ms/farhadi/home.aspx

 
Qualifications
2000 - 2005    PhD in Mechanical Engineering - Energy Conversion

Thesis : Investigation and Improvement of selective structure function model (SSF) of large eddy simulation

Supervisor : Prof. M. Rahnama - Advisors : Prof. S. H. Mansouri and Prof. E. Shirani

Faculty of Engineering, Shahid Bahonar University of Kerman, Kerman - Iran.

1996 - 1998    MSc in Mechanical Engineering - Energy Conversion

Dissertation : turbulent natural convection heat transfer flow in the annular region of two horizontal concentric with radial fins

Supervisor : Prof. M. Rahnama

Faculty of Engineering, Shahid Bahonar University of Kerman, Kerman - Iran.

1991 - 1995    BSc in Mechanical Engineering - Mechanical of Powerplant

Faculty of Mechanical and Energy Engineering, Power and Water Institute of Technology (Shahid Abbaspour), Tehran - Iran.

 
Research Interests
  • Computational Fluid Dynamics
  • Fuel Cell
  • Heat Transfer
  • Large Eddy Simulation
  • Lattice Boltzmann Method
  • Nanofluid
  • Turbulence Modeling
 
Honors and Awards

Distinguished Researcher, Babol Noshirvani University Technology, 2011

Distinguished Researcher, Mazandaran Province, 2012

 
Previous and Present Positions

Power Engineering Consultants Co. - Moshanir, 1998 - 1999

Kerman Regional Electric Co., 2000 - 2001

Faculty Member of Babol University of Technology, since 2005

Member of Editorial Board

Reviewer of Journals

  • Chemical Engineering Communications
  • Chemical Industry & Chemical Engineering Quaterly
  • Communication in Nonlinear Science and Numerical Simulation
  • Heat and Mass Transfer
  • International Communications in Heat and Mass Transfer
  • International Journal of Computational Fluid Dynamics
  • International Journal of Engineering
  • International Journal of Heat and Mass Transfer
  • International Journal of Thermal Science
  • Journal of Fluids Engineering ( ASME )
  • Journal of Renewable and Sustainable Energy
  • Numerical Heat Transfer, Part A
  • Proceeding IMechE Part C: J. Mechanical Engineering Science
  • Physics Letters A
  • Thermal Science
  • World Applied Sciences Journal
 
Professional Membership
 
Teaching Experiences
Undergraduate Courses
  • Fluid Mechanics 1
  • Heat Transfer 1, 2
  • Powerplants ( Thermal and Nuclear )
  • Thermodynamics Lab.
Graduate Courses
  • Boundary Layer Theory
  • Convective Heat Transfer
  • Continuum Mechanics
  • Radiation Heat Transfer
  • Turbulence
Weekly Program
 
Publications

BOOKS
  • Fundamentals of Cavitation ( Translate to Persian )
Publisher: Babol Noshirvani University of Technology, ISBN: 978-6-0070-228-5, 2015
M. Farhadi, E. Alizadeh and H. Ebrahimi-Kebria
  • Computational Fluid Dynamics: Theory, Analysis and Applications ( Book Chapter )
Chapter entitled: Lattice Boltzmann Method for Fluid Dynamics, pp: 551-592
Publisher: Nova Science, ISBN: 978-1-61209-276-8, 2011
M. A. Delavar, M. Farhadi and K. Sedighi
  • Fundamental of Compressible Fluid Dynamics ( Translate to Persian )
Publisher: Babol Noshirvani University of Technology, ISBN: 978-964-04-5572-2, 2010.
M. Farhadi and S. Ghanamy.


JOURNAL PAPERS

  1. A Ali Rabienataj Darzi, Mahmoud Jourabian, Mousa Farhadi, Melting and solidification of PCM enhanced by radial conductive fins and nanoparticles in cylindrical annulus, Energy Conversion and Management, 2016

  2. S Morteza Mousavi, Mousa Farhadi, Kurosh Sedighi, Effect of non-uniform magnetic field on biomagnetic fluid flow in a 3D channel, Applied Mathematical Modelling, 2016

  3. Mousa Farhadi, Kurosh Sedighi, Afshin Mohsenzadeh Korayem, Effect of wall proximity of two staggered triangular cylinders on the transport process in a channel, Engineering Science and Technology, an International Journal, 2016

  4. Milad Azarmanesh, Mousa Farhadi, Pooya Azizian, Double emulsion formation through hierarchical flow-focusing microchannel, Physics of Fluids, 2016

  5. A Hasanpour, M Farhadi, K Sedighi, Experimental heat transfer and pressure drop study on typical, perforated, V-cut and U-cut twisted tapes in a helically corrugated heat exchanger, International Communications in Heat and Mass Transfer 71, 126-136, 2016

  6. S Yarmohammadi, M Farhadi, H Hajimiri, MR Salimpour, Multi-Objective Optimization Of R-404A Vapor Condensation In Swirling Flow Using Genetic Algorithms, Heat Transfer Engineering, 00-00, 2016

  7. E Fattahi, HH Afrouzi, M Farhadi, Numerical simulation of droplet detachment from solid walls under gravity force using lattice Boltzmann method SEM Tilehboni, Journal of Molecular Liquids 212, 544-556, 2015

  8. M Valizadeh, MA Delavar, M Farhadi, Numerical simulation of heat and mass transfer during hydrogen desorption in metal hydride storage tank by Lattice Boltzmann method, International Journal of Hydrogen Energy, 2015

  9. M. Jafari, M. Farhadi, K. Sedighi, Convection heat transfer of SWCNT-nanofluid in a corrugated channel under pulsating velocity profile, International Communications in Heat and Mass Transfer, Vol. 67, pp. 137-146, 2015.

  10. H. Hassanzade Afroozi, K. Sedighi, M. Farhadi, A. Moshfegh, Lattice Boltzmann Analysis of Micro-particles Transport in Pulsating Obstructed Channel Flow, Computers and Mathematics with Applications, Vol. 70, pp. 1136-1151, 2015.

  11. Mahmoud Jourabian, Mousa Farhadi, Melting of nanoparticles-enhanced phase change material (NEPCM) in
    vertical semicircle enclosure: numerical study
    , Journal of Mechanical Science and Technology, Vol. 29, Issue 9, pp. 1-12, 2015.

  12. M. Azarmanesh, M. Farhadi, The effect of weak-inertia on droplet formation phenomena in T-junction microchannel, Meccanica, 2015, online first.

  13. Milad Azarmanesh , Mousa Farhadi , Pooya Azizian , Simulation of the double emulsion formation through a hierarchical T-junction microchannel, International Journal of Numerical Methods for Heat & Fluid Flow, Vol. 25 Iss: 7, pp. - (Article in press)2015.

  14. M. Jafari, M. Farhadi, S. Akbarzade, M. Ebrahimi, Lattice Boltzmann simulation of natural convection heat transfer of SWCNT-nanofluid in an open enclosure, Ain Shams Engineering Journal , Vol. 6, pp. 913-927, 2015.

  15. M. Jafari, M. Aghajani-Delavar, M., Farhadi, A. Nay sari,  Wall shape effects on convection heat transfer over a corrugated channel, Heat Transfer - Asian Research (Article in press)

  16. Y. Vazifeshenas, M. Farhadi, K. Sedighi and R. Shafaghat, NUMERICAL SIMULATION OF CAVITATION IN MIXED FLOW PUMP, International Journal of Engineering, Volume 28- 6 - Transactions C: Aspects, pp. 956-963, 2015.

  17. A. Ali Rabienataj Darzi, Mousa Farhadi, Kurosh Sedighi, Experimental Investigation of Convective Heat transfer and Friction Factor of Al2o3/water nanofluid in helically corrugated tube, Experimental Thermal and Fluid Science, Vol. 57, pp. 188-199, 2014.

  18. S. Akbarzade, M. Farhadi, K. Sedighi, M. Ebrahimi, Experimental Investigation on the Thermal Conductivity and Viscosity of ZnO Nanofluid and Development of New, Journal of Transport Phenomena in Nano and Micro Scales (TPNMS), Vol. 2, Issue 2,  pp. 149-160, Summer and Autumn 2014.

  19. A. Hasanpour, M. Farhadi, K. Sedighi, A review study on twisted tape inserts on turbulent flow heat exchangers; The overall enhancement ratio criteria, International Communications in Heat and Mass Transfer, Vol. 55, pp. 53-62, 2014.

  20. Habibollah Heidarzadeh, Mousa Farhadi, Kourosh Sedighi, CONVECTIVE HEAT TRANSFER OVER A WALL MOUNTED CUBE AT DIFFERENT ANGLE OF ATTACK USING LARGE EDDY SIMULATION, Thermal Science (in press)

  21. Mahmoud Jourabian, Mousa Farhadi, Kurosh Sedighi, On the expedited melting of phase change material (PCM)through dispersion of nanoparticles in the thermal storage unit, Computers and Mathematics with Applications, Vol. 67, pp. 1358-1372, 2014.

  22. Mohammad Jafari, Mousa Farhadi, Kurosh Sedighi, Single Walled Carbon Nanotube Effects on Mixed Convection heat Transfer in an Enclosure: a LBM Approach, Journal of Transport Phenomena in Nano and Micro Scales (TPNMS), Vol. 2, Issue 1, pp.14-28, 2014.

  23. A. Ali Rabienataj Darzi, Mousa Farhadi, Kurosh Sedighi, Mahmoud Jourabian and Yousef Vazifeshenas, NATURAL CONVECTION MELTING OF NEPCM IN A CAVITY WITH AN OBSTACLE USING LATTICE BOLTZMANN METHOD, International Journal of Numerical Methods for Heat & Fluid Flow,  Vol. 24 Issue 1, pp.221 – 236, 2014.

  24. M. Ebrahimi, M. Farhadi, K. Sedighi, S. Akbarzade, EXPERIMENTAL INVESTIGATION OF FORCE CONVECTION HEAT TRANSFER IN A CAR RADIATOR FILLED WITH SIO2-WATER NANOFLUID, International Journal of Engineering, Volume 27 - 2 - Transactions B: Applications, pp. 401-409, 2014.

  25. Mohammad Jafari, Mousa Farhadi, Kourosh Sedighi, Heat Transfer Enhancement in a Corrugated Channel using Oscillating flow and Nanoparticles: a LBM Approach, Numerical Heat Transfer, Part A, Vol. 65, Issue 6, pp. 601-626, 2014.

  26. A. Abouei Mehrizi, K. Sedighi, M. Farhadi, M. Sheikholeslami, Lattice Boltzmann simulation of natural convection heat transfer in an elliptical-triangular annulus, International Communications in Heat and Mass Transfer, Vol. 48, pp. 164-177, 2013.

  27. A.A. Rabienataj Darzi, S.M. Moosania, F.L. Tan, M. Farhadi, Numerical investigation of free-cooling system using plate type PCM storage, International Communications in Heat and Mass Transfer, Vol. 48, pp. 155-163, 2013.

  28. A.A Rabienataj Darzi, Mousa Farhadi, Kurosh Sedighi, HEAT TRANSFER AND FLOW CHARACTRISTICS OF AL2O3 –WATER NANOFLUID IN A DOUBLE TUBE HEAT EXCHANGER, International Communications in Heat and Mass Transfer, Vol. 47 , pp.105–112, 2013

  29. Mahmoud Jourabian, Mousa Farhadi, Ahmad Ali Rabienataj Darzi, Outward melting of ice enhanced by Cu nanoparticles inside cylindrical horizontal annulus: lattice Boltzmann approach, Applied Mathematical Modelling, Vol. 37 , pp.8813–8825, 2013.

  30. Mohammad Jafari, Mousa Farhadi, Kourosh Sedighi, Pulsating Flow Effects on Convection Heat Transfer in a Corrugated Channel: a LBM Approach, International Communications in Heat and Mass Transfer, Vol. 45 , pp.146–154, 2013.

  31. A. A. Rabienataj Darzi, Mousa Farhadi, Mahmoud Jourabian, LATTICE BOLTZMANNSIMULATION OF HEAT TRANSFER ENHANCEMENT DURING MELTING BY USING NANOPARTICLES, IJST, Transactions of Mechanical Engineering, Vol. 37, No. M1, pp 23-37, 2013.

  32. E. Alizadeh, M. Farhadi, K. Sedighi, M. Shakeri, Effect of Channel Depth and Cell Temperature on the Performance of a Direct Methanol Fuel Cell, ASME Journal of Fuel Cell Science and Technology, Vol. 10, Issue 3, 031002-031008, 2013.

  33. M. Nourollahi, M. Farhadi, K. Sedighi, Modified Structure Function Model Based on Coherent Structures, International Journal of Engineering ,Volume 26, No. 5, Transactions B: Applications, pp. 523-532, 2013.

  34. S. E. Mousavi Tilehboni, K. Sedighi, M. Farhadi, E. Fttahi, LATTICE BOLTZMANN SIMULATION OF DEFORMATION AND BREAKUP OF A DROPLET UNDER GRAVITY FORCE USING INTERPARTICLE POTENTIAL MODEL, International Journal of Engineering, Volume 26, No. 7, Transactions A: Basics, pp. 821-830, 2013.

  35. Ehsan Fattahi, Mousa Farhadi, Kurosh Sedighi, Natural Convection and Entropy Generation in Γ-Shaped Enclosure Using Lattice Boltzmann Method, Transport Phenomena in Nano and Micro Scales, Vol. 1, No. 1, pp. 1-18, 2013.

  36. Mahmoud Jourabian, Mousa Farhadi, Ahmad Ali Rabienataj Darzi, A. Abouei Mehrizi, LATTICE BOLTZMANN SIMULATION OF MELTING PHENOMENON WITH NATURAL CONVECTION FROM AN ECCENTRIC ANNULUS, Thermal Science, Vol. 17, ISSUE 3, pp. 877 – 890, 2013.

  37. A. Abouei Mehrizi, M. Farhadi, K. Sedighi, Amir Latif Aghili, Lattice Boltzmann Simulation of Heat Transfer Enhancement in a Cold plate Using Porous Medium, Journal of Heat Transfer (ASME), Vol. 135, Issue 11, pp. 111006-111014, 2013.

  38. A. Abouei Mehrizi, Mousa Farhadi, H. Hassanzadeh Afrouzi, S. Shayamehr, Lattice Boltzmann Simulation of Natural Convection Flow around a Horizontal Cylinder Located Beneath an Insulation Plate, Journal of Theoretical and Applied Mechanics, Vol. 51, No. 3, pp., 2013.

  39. A. Abouei Mehrizi, M. Farhadi, K. Sedighi, M. Aghajani Delavar, Effect of fin position and porosity on heat transfer improvement in a plate porous media heat exchanger, Journal of the Taiwan Institute of Chemical Engineers, Volume 44, Issue 3, Pages 420–431, 2013.

  40. Mahmoud Jourabian, Mousa Farhadi, Ahmad Ali Rabienataj Darzi, Convection-dominated melting of phase change material in partially heated cavity: lattice Boltzmann study, Heat and Mass Transfer, Volume 49, Issue 4, pp 555-565, 2013.

  41. P. Pashaie, M. Jafari, H. Baseri, M. Farhadi, Nusselt Number Estimation along a Wavy Wall in an Inclined Lid-driven Cavity using Adaptive Neuro-Fuzzy Inference System (ANFIS), International Journal of Engineering, Volume 26, No. 4, Transactions A: Basics, pp. 383-392, 2013.

  42. H. R. Ashorynejad, Kurosh Sedighi, Mousa Farhadi, Ehsan Fattahi, Lattice Boltzmann Simulation of Magnethydrodynamics natural Convection Flow for Salt Water in a Horizontal Cylindrical Annulus, Iranian Journal of Science & Technology, Transaction B. Engineering, Vol. 37, No. M1, pp 11-22, 2013.

  43. A.A Rabienataj Darzi, Mousa Farhadi, Kurosh Sedighi, Shahriar Aallahyari, Mojtaba Aghajani Delavar, Turbulent Heat Transfer of Al2O3-water Nanofluid inside Helically Corrugated Tubes: Numerical study, International Communications in Heat and Mass Transfer, Volume 41,  Pages 68–75, 2013.

  44. A. Abouei Mehrizi, M. Farhadi, S.Shayamehr, Natural convection flow of Cu-Water nanofluid in horizontal cylindrical annuli with inner triangular cylinder using Lattice Boltzmann method, International Communications in Heat and Mass Transfer, Vol. 44, pp. 147–156, 2013.

  45. H. Hassanzade Afroozi, M. Farhadi, A. Abouei Mehrizi, Numerical Simulation of Micro Particles Transport in a Concentric Annulus by Lattice Boltzmann Method, Advanced Powder Technology, Vol. 24, pp. 575–584, 2013.

  46. N. Jamshidi, Mousa Farhadi, D. D. Ganji, Kurosh Sedighi, Experimental analysis of heat transfer enhancement in shell and helical tube heat exchangers, Applied Thermal Engineering, Vol. 51, Issues 1–2, pp. 644-652,  2013.

  47. Yousef Vazifeshenas, Mousa Farhadi, Kurosh Sedighi, Ruzbeh Shafaghat, Turbulent Flow Analysis and Cavitation Prediction in Axial Cooling Water Pump, International Journal of Multiphysics, Vol. 6, No. 4, pp. 365-377, 2012.

  48. Mahmoud Jourabian, Mousa Farhadi, Ahmad Ali Rabienataj Darzi, Lattice Boltzmann investigation for enhancing the thermal conductivity of ice using AL2O3 porous matrix, International journal of Computational Fluid Dynamics, Vol. 26, Nos. 9–10, 451–462, 2012.

  49. A. Hasanpour, M. Farhadi, K. Sedighi, H. R. Ashorynejad, Numerical Study of Prandtl Effect on MHD Flow at a Lid-Driven Porous Cavity, International Journal for Numerical Methods in Fluids, Vol. 70, Issue 7, pp.886- 898, 2012.

  50. Mahmoud Jourabian, Mousa Farhadi, Kurosh Sedighi, Ahmad Ali Rabienataj Darzi and Yousef Vazifeshenas, Simulation of natural convection melting in a cavity with fin using lattice Boltzmann method, International Journal for Numerical Methods in Fluids, Vol. 70, Issue 3, pp. 313-325, 2012.

  51. A. Abouei Mehrizi, M. Farhadi, K. Sedighi, H. Hassanzade Afroozi, EFFECT OF OBSTACLE POSITION AND POROUS MEDIUM FOR HEAT TRANSFER IN AN OBSTRUCTED VENTILATED CAVITY, (Journal of  Technology) Jurnal Teknologi,  Vol. 58, pp. 59–64, 2012.  

  52. A. A. Rabienataj Darzi, M. Farhadi, K. Sedighi, R. Shafaghat, K. Zabihi, Experimental Investigation of Turbulent Heat Transfer and Flow characteristics of SiO2/water Nanofluid within Helically Corrugated Tubes, International Communications in Heat and Mass Transfer, Vol. 39, Issue 9, pp. 1425–1434, 2012.

  53. M. Jafari, M. Farhadi, K. Sedighi, A. Abouei Mehrizi, Lattice Boltzmann Simulation of Mixed Convection Heat Transfer in a Corrugated Wall Cavity Utilizing Water-based Nanofluids, Heat Transfer- Asian Research, Vol. 41, Issue 8, pp. 649-665, 2012.

  54.  Habibollah Heidarzadeh, Mousa Farhadi, Kurosh Sedighi, Convective Heat Transfer over a Wall Mounted Cube Using Large Eddy Simulation, CFD letter, Vol. 4, Issue 2, pp. 80-92, 2012.

  55. N. Jamshidi, Mousa Farhadi, D. D. Ganji, Kurosh Sedighi, Experimental investigation on the viscosity of nanofluids, International Journal of Engineering, TRANSACTIONS B: Applications Vol. 25, No. 3, pp. 201-209, 2012.

  56. H. Hassanzadeh, K. Sedighi, M. Farhadi, H. Fattahi, Dispersion and Deposition of Micro Particles over Two square Obstacles in a Channel via Hybrid Lattice Boltzmann Method and Discrete Phase model, International Journal of Engineering, Vol. 25 - 3 - Transactions C: Aspects, pp. 257-266, 2012.

  57. Mahmoud Jourabian, Mousa Farhadi, Ahmad Ali Rabienataj Darzi, Simulation of natural convection melting in an inclined cavity using lattice Boltzmann method, Scientia Iranica, Vol. 19, Issue 4, pp. 1066–1073, 2012.

  58. A. Abouei Mehrizi, M. Farhadi, K. Sedighi, H. Hassanzade Afroozi, A. A. Rabienataj Darz, Mixed convection heat transfer in a ventilated cavity with hot obstacle: Effect of nanofluid and outlet port location, International Communications in Heat and Mass Transfer, Vol. 39, Issue 7, pp. 1000–1008, 2012.

  59. Mahmoud Jourabian, Mousa Farhadi, Kurosh Sedighi, Ahmad Ali Rabienataj Darzi and Yousef Vazifeshenas, MELTING OF NEPCM WITHIN CYLINDRICAL TUBE: NUMERICAL STUDY USING LATTICE BOLTZMANN METHOD, Numerical Heat Transfer, Part A: Applications, Vol. 61, Issue: 12, pp. 929 – 948, 2012.

  60. Moustafa Nooroullahi, Mousa Farhadi, Kurosh Sedighi, Large Eddy Simulation of Flow over a Wall-Mounted Cube: Comparison of Different Semi Dynamic Subgrid Scale Models, International Journal of Multiphysics, Vol. 6, No. 1, pp. 43-59, 2012.

  61. H. Nemati, M. Farhadi, K. Sedighi, H. R. Ashorynejad, E. Fattahi, Magnetic field effects on natural convection flow of a nanofluid in Rectangular cavity using Lattice Boltzmann model, Scientia Iranica, Volume 19, Issue 2, pp. 303–310, 2012.

  62. H. A. Ashorynejad, K. Sedighi, M. Farhadi, SIMULATING OF MAGNETOHYDRODYNAMIC NATURAL CONVECTION FLOW IN A HORIZONTAL CYLINDRICAL ANNULUS USING LATTICE BOLTZMANN METHOD, Heat Transfer- Asian Research, Vol. 41, Issue 6, pp. 468–483, 2012.

  63. M. Jafari, M. Farhadi, K. Sedighi, E. Fattahi, Effect of Wavy Wall on Convection Heat Transfer of Water-Al2O3 Nanofluid in a Lid-driven Cavity Using Lattice Boltzmann Method, International Journal of Engineering, Vol. 25, No. 2, pp. 165-175, 2012.

  64. M. Jafari, M. Farhadi, K. Sedighi, E. Fattahi, Lattice Boltzmann Simulation of Mixed Convection in an Inclined Cavity with a Wavy Wall, Heat Transfer- Asian Research ,Vol.  41, Issue 5, pp. 371-387, 2012.

  65. S. M. Hashemian, M. Rahnama, M. Farhadi, Large Eddy Simulation of Turbulent Heat Transfer in a Channel with a Square Cylinder, Heat Transfer Engineering, Vol. 33, Issue 12, pp. 1052-1062, 2012.

  66. N. Jamshidi, Mousa Farhadi, Kurosh Sedighi, D. D. Ganji, Optimization of design parameters for nanofluids flowing inside helical coils, International Communications in Heat and Mass Transfer, Vol. 39, Issue 2, , pp. 311–317, 2012.

  67. Hasan Nemati, Mousa Farhadi, Kurosh Sedighi, Mohammad Mohammadi Pirouz, Nima Niksefat Abatari, Convective Heat transfer from two rotating circular cylinders in tandem arrangement using Lattice Boltzmann Method, Applied Mathematics and Mechanics, Vol. 33(4), pp. 427–444, 2012.

  68. Ehsan Fattahi, Mousa Farhadi, Kurosh Sedighi, Hasan Nemati, Lattice Boltzmann simulation of natural convection heat transfer in nanofluids, International Journal of Thermal Sciences, Volume 52, pp. 137-144, February 2012.

  69. A. A. Rabienataj Darzi, M. Farhadi, K. Sedighi, Numerical study of melting inside concentric and eccentric horizontal Annulus, Applied Mathematical Modelling, Volume 36, Issue 9, pp. 4080–4086, September 2012.

  70. H. A. Ashorynejad, M. Farhadi, K. Sedighi, A. Hasanpour, Natural Convection in a Porous Medium Cavity with an Applied Vertical Magnetic Field using Lattice Boltzmann Method, Applied Mechanics and Materials Vols. 110-116, pp 839-846, 2012.

  71. Masome Heidari, Mousa Farhadi, Kurosh Sedighi, Mostafa Nourollahi, Numerical Investigation of Flow around Two Semi-Circular Cylinders with Splitter Plate, Heat Transfer Research, Volume 42 / Issue 7, pp. 595-612, 2011.

  72. A. Hasanpour, M. Farhadi, K. Sedighi, H. R. Ashorinejad, Numerical Study of Variable Porosity Porous layer in a Channel with Insulation Walls, Computational Thermal Science, Vol. 3, Issue 5, pp. 397-405, 2011.

  73. Arman Hasanpour, Kurosh Sedighi, Mousa Farhadi, Effect of Porous Screen on Flow Stabilization and Heat Transfer in a Channel with Variable Porosity Model by Lattice Boltzmann Method, Turkish Journal of Engineering and Environmental Science, Vol. 35, pp. 1-14, 2011.

  74. Mojtaba Parvizi Omran, Mousa Farhadi, Kurosh Sedighi, The Effect of Cell temperature and Channel Geometry on the Performance of a Direct Methanol Fuel Cell, ASME Journal of Fuel Cell Science and Technology, Vol. 8 , pp. 061004-1- 061004-8, 2011.

  75. E. Fattahi, M. Farhadi, K. Sedighi, Lattice Boltzmann simulation of mixed convection heat transfer in eccentric annulus, International Communications in Heat and Mass Transfer, Vol. 38, Issue 8, pp. 1135-1141, 2011.

  76. M. M. Pirouz, M. Farhadi, K. Sedighi, H. Nemati, E. Fattahi, Lattice Boltzmann Simulation of Conjugate heat transfer in a rectangular Channel with wall-mounted obstacles, Scientia Iranica, Section B, Vol. 18, No: 2, pp. 213-221, 2011.

  77. H. Nemati, M. Farhadi, K. Sedighi, E. Fattahi, MULTI-RELAXATION-TIM LATTICE BOLTZMAN MODEL FOR UNIFORM-SHEAR FLOW OVER A ROTATING CIRCULAR CYLINDER, THERMAL SCIENCE, Vol. 15, No. 3, pp. 863-882, 2011.

  78. M. Aghajani Dalavar, M. Farhadi, K., Sedighi, EFFECT OF DISCERET HEATER AT THE VERTICAL WALL OF THE CAVITY OVER THE HEAT TRANSFER AND ENTROPY GENERATION USING LBM, THERMAL SCIENCE, Vol. 15, ISSUE 2, pp. 423-435, 2011.

  79. A. A. Rabienataj Darzi, M. Farhadi, K. Sedighi, E. Fattahi & H. Nemati, Mixed convection simulation of inclined lid driven cavity using lattice Boltzmann method, Iranian Journal of Science and Technology Transaction B: Engineering, Vol. 35, No. M1, pp. 209-219, 2011.

  80. H. A. Ashorynejad, M. Farhadi, K. Sedighi, A. Hasanpour, Free Convection in a MHD Porous Cavity with using Lattice Boltzmann Method, World Academy of Science, Engineering and Technology, Issue 73, pp. 735-740, 2011.

  81. A. Hasanpour, M. Farhadi and H. R. Ashorynejad, Hole Configuration Effect On Turbine Blade Cooling, World Academy of Science, Engineering and Technology, Vol. 73, Issue 73, pp. 375-379, 2011.

  82. A. A. R. Darzi, M. Farhadi, K. Sedighi, Numerical study of the fins effect on mixed convection heat transfer in a lid-driven cavity, Journal of Mechanical Engineering Science (Proceeding of the Institution of Mechanical Engineers (IMECH e) Part C), Vol. 225, Number 2 , pp. 397-406, 2011.

  83. Moshfegh, Abouzar, Farhadi, Mousa and Shams, Mehrzad, Numerical Simulation of Particle Dispersion and Deposition in Channel Flow Over Two Square Cylinders in Tandem, Journal of Dispersion Science and Technology, Volume 31 Number 6, pp. 852 — 859, 2010.

  84. Arman Hasanpour, Mousa Farhadi, Kurosh Sedighi and Hamid Reza Ashorynejad, Lattice Boltzmann Simulation for Magnetohydrodynamic Mixed Convective Flow in a Porous Medium, World Applied Sciences Journal, Volume 11 Number 9,  pp. 1124-1132, 2010

  85. H. Nemati, M. Farhadi, K. Sedighi, E. Fattahi, A.A.R. Darzi, Lattice Boltzmann simulation of nanofluid in lid-driven cavity, International Communications in Heat and Mass Transfer, Vol. 37, Issue 10, pp. 1528-1534, 2010.

  86. E. Alizadeh, K. Sedighi, M. Farhadi, M. Shakeri, Effect of Methanol Concentration and Channel Depth on Performance of Direct Methanol Fuel Cell, Majlesi Journal of Mechanical Engineering, Vol. 4, Number 12, pp. 19-26, 2010 (Farsi).

  87. E. Fattahi, M. Farhadi, K. Sedighi, Lattice Boltzmann simulation of natural convection heat transfer in eccentric annulus, International Journal of Thermal Sciences, Vol. 49, Issue 12 , pp. 2353-2362, 2010.

  88. H. Nemati, K. Sedighi, M. Farhadi, M. M. Pirouz, E. Fattahi, Numerical simulation of fluid flow of two rotating side by side circular cylinder by Lattice Boltzmann Method, International journal of Computational Fluid Dynamics, Vol. 24, No. 3, 83-94, 2010.

  89. M. Aghajani Dalavar, M. Farhadi, K., Sedighi, Numerical Simulation Of Direct Methanol Fuel Cells Using Lattice Boltzmann Method, International Journal of Hydrogen Energy,  Vol. 35, Issue 17, pp. 9306-9317, 2010.

  90. Ghayor, R., Shakeri, M., Sedighi, K., Farhadi, M., Experimental and numerical investigation on passive and active μDMFC, International Journal of Hydrogen Energy, Vol. 35, Issue 17, pp. 9329-9337, 2010.

  91. N. Jamshidi, M. Farhadi, K. Sedighi, Flow structure in the downstream of a square cylinder with different angles of incidence, International Journal of Multiphysics, Vol. 4, No 1, pp11-20, 2010.

  92. Farhadi, M., Sedighi, K., Fattahi, E., Effect of a splitter plate on flow over a semi-circular cylinder, Journal of Aerospace Engineering( Proceeding of the Institution of Mechanical Engineers Part G), Vol. 224(3), pp. 321-330, 2010.

  93. M. Farhadi, K. Sedighi, A. Mohsenzadeh Korayem, Effect of wall proximity on forced convection in a plane channel with a built-in triangular cylinder, International Journal of Thermal Science, Vol. 49, Issue 6, pp. 1010-1018, 2010.

  94. A. Mohsenzadeh, M. Farhadi, K. Sedighi, Convective Cooling of Tandem Heated triangular cylinders confirm in a channel, Thermal Science, Vol. 14, No. 1, pp. 183-197, 2010.

  95. E. Alizadeh, M. Farhadi, K., Sedighi, M. Shakeri, Effects of Operating Parameters on Performance of a single Direct Methanol Fuel Cell, Thermal Science,  Vol. 14, No. 2, pp. 469 - 477, 2010.

  96. M. Nourollahi, M. Farhadi, K., Sedighi, Numerical Study of mixed convection and Entropy Generation in the Poiseulle–Benard Channel in Different Angles, Thermal Science,  Vol. 14, No. 2, pp. 329-340, 2010.

  97. A. A.  Ranjbar, K. Sedighi, M. Farhadi, and M. Pourfallah, COMPUTATIONAL STUDY OF THE EFFECT OF DIFFERENTINJECTION ANGLE ON HEAVY DUTY DIESEL ENGINECOMBUSTION, Thermal Science,  Vol. 13, No. 3, pp. 9-21, 2009

  98. M. Aghajani Dalavar, M. Farhadi, K., Sedighi, Effect of the Heater Location on Heat Transfer and Entropy Generation in the Cavity Using the Lattice Boltzmann Method, Heat Transfer Research, Vol. 40, Issue 6, pp. 521-536, 2009.  

  99. E. Alizadeh, M. Farhadi, K., Sedighi, H.R. Ebrahimi-Kebria, A. Ghafourian,  Solution of the Falkner-Skan Equation for Wedge by Adomian Decomposition Method, Communications in Nonlinear Science and Numerical Simulation, Vol. 14,Issue 3,  pp. 724–733, 2009.

  100. E. Alizadeh, K. Sedighi, M. Farhadi, H.R. Ebrahimi-Kebria, Analytical approximate solution of the cooling problem by Adomian decomposition method, Communications in Nonlinear Science and Numerical Simulation, Vol. 14, Issue 2, pp.462-472, 2009.

  101. Farhadi, M., Sedighi, K, Madani, M. M., Convective Cooling of Tandem Heated Squares in a Channel, Journal of Mechanical Engineering Science (Proceeding of the Institution of Mechanical Engineers (IMECH e) Part C), Vol. 223, No. 4, pp. 965-978, 2009.

  102. Mohammad Javad Hosseini, Mousa Farhadi, Kurosh Sedighi, Effect of wall-mounted obstacles on convective heat transfer in the Poiseulle-Benard channel, FACTA UNIVERSITATIS Series: Mechanical Engineering Vol. 6, No 1, pp. 25 – 36, 2008.

  103. M. Farhadi, K. Sedighi, Flow over two tandem wall-mounted cubes using LES, Journal of Mechanical Engineering Science (Proceeding of the Institution of Mechanical Engineers (IMECH e) Part C), Vol. 222, No. 8, pp. 1465-1475, 2008.

  104. M. Farhadi, H. Hadimoghaddam, Numerical Study of Forced Convective Heat Transfer from a Square Cylinder in a Channel, Journal of Numerical Simulation in Engineering, Vol. 1, No. 3, pp. 199-205, 2008.

  105. S. M. Hashemian, M. Rahnama, M. Farhadi, Turbulent heat transfer in a channel with a built-in square cylinder: effect of Reynolds number, International Journal of Science and Technology (SCIENTIA IRANICA) Vol. 15(1), pp. 57-64, 2008.

  106. K. Sedighi, M. Farhadi, M. Liaghi, Exergy analysis: Parametric study on lithium bromide-water absorption refrigeration systems, Journal of Mechanical Engineering Science (Proceeding of the Institution of Mechanical Engineers (IMECH e) Part C), 2007, Vol. 221, No. 11, pp. 1345-1351.

  107. M. Farhadi, K. Sedighi, Numerical study of Inlet Velocity Profile Effects on Flow over a Wall-Mounted Cube in a Channel Using LES, Journal of Numerical Simulation in Engineering,Vol.1, No. 1, pp. 30-38, 2007.(Farsi)

  108. K. Sedighi, M. Farhadi, Three-dimensional study of vertical structure around a cubic bluff body in a channel, Scientific Journal FACTA UNIVERSITATIS  Series: Mechanical Engineering Vol. 4, No 1, pp. 1 - 16, 2006.

  109. M. Farhadi, K. Sedighi, LES Numerical study of Reynolds number effects on flow over a wall-mounted cube in a channel, Journal of Aerospace Science and Technology (JAST), Vol. 3(1), pp. 51-60, 2006.

  110. M. Farhadi, M. Rahnama, Large Eddy Simulation of Separated Flow over a Wall-Mounted Cube, International Journal of Science and Technology (SCIENTIA IRANICA), Vol. 13(2), pp. 124-133, 2006.

  111. M. Farhadi, S. R. Esmailian, M. Rahnama, Numerical Investigation of laminar flow over Confined rectangular obstacle: Effect of blockage and aspect ratios, Journal of Engineering, Vol. 3, No 3 ,Mechanical Engineering, 2005, pp. 27-33.(Farsi)

  112. M. Farhadi, M. Rahnama, Three-dimensional Study of Separated Flow over a Square Cylinder by Large Eddy Simulation, Journal of Aerospace Engineering( Proceeding of the Institution of Mechanical Engineers Part G), Vol. 219(3), pp. 225-234, 2005.

  113. Rahnama, M. and Farhadi, M., Effect of Radial fins on Two-Dimensional turbulent natural convection in a horizontal annulus, International Journal of Thermal Science, Vol.43 (3), pp.255-264, 2004.

  114. Farhadi, M., Rahnama, M., Large eddy simulation of flow over a wall-mounted cube at moderate Reynolds number, Journal of Engineering, Vol. 2, No 3&4, pp. 193-202, 2003.


CONFERENCE PAPERS

  1. S. Akbarzade,  M. Ebrahimi, M. Farhadi, and N. Jamshidi , Experimental investigation of Temperature and Volume Concentration on Viscosity of TiO2 Nanofluid, 1st Iranian Conference on Heat and Mass Transfer, University of Sistan and Baluchestan, Zahedan, 15-17 September, 2012.

  2. M. Ebrahimi, S. Akbarzade, M. Farhadi, and N. Jamshidi , Experimental investigation of Effect of surfactants on Stability of SiO2 Nanofluid, 20th Annual International Conference on Mechanical Engineering-ISME2012, School of Mechanical Eng., Shiraz University, Shiraz, Iran, 16-18 May, 2012.

  3. M. Jafari, M. Farhadi, E. Fattahi, A. Abouei, Lattice Boltzmann Simulation of Mixed Convection Heat Transfer of Water-Al2O3 Nanofluid in a Corrugated-Wall Cavity, 20th Annual International Conference on Mechanical Engineering-ISME2012, School of Mechanical Eng., Shiraz University, Shiraz, Iran, 16-18 May, 2012.

  4. M. Jafari, M. Farhadi, K. Sedighi, A. Abouei Mehrizi, Lattice Boltzmann simulation of convective heat transfer of water-Cu nanofluid in a wavy walled lid driven cavity, 14th Conference of Fluid Dynamics, the University of Birjand, Iran, 1-3 May, 2012.

  5. A. Abouei Mehrizi, M. Farhadi, K. Sedighi, H. Hassanzade, M. Jafari, NONO-PARTICLE EFFECT ON HEAT TRANSFER IN VENTILATED CAVITY INCLUDE HOT OBSTRUCTION USING LATTICE BOLTZMANN METHOD, 14th Conference of Fluid Dynamics, the University of Birjand, Iran, 1-3 May, 2012.

  6. A. Abouei Mehrizi, M. Farhadi, H. Hassanzade, K. Sedighi, Effect of fin position and porosity on enhancement heat transfer in porous media heat exchanger, 14th Conference of Fluid Dynamics, the University of Birjand, Iran, 1-3 May, 2012.

  7. H. Hassanzade, M. Farhadi, K. Sedighi, A. Abouei Mehrizi, Investigation of Particle Dispersion and Deposition in ans obstructed channels with Pulsating inlet flow, 14th Conference of Fluid Dynamics, the University of Birjand, Iran, 1-3 May, 2012.

  8. M. A. Delavar, K. Sedighi, M. Farhadi, Investigation of heat generation and thermal field in fuel cell using lattice Boltzmann method, The 2nd Conference on Hydrogen and Fuel Cell, K. N. Toosi University of Technology, May 2 - 3, 2012

  9. H. Hassanzade, M. Farhadi, K. Sedighi, A. Abouei Mehrizi, H. Fazeli, M. Shateri, Numerical Study of Particle Deposition Over Two Square Cylinders Using LBM, 11th  Conference of Iranian Aerospace Society, Shahid Sattari Aeronautical Univ. Sci. and Tech., Tehran, Iran, 19-21 February, 2012.

  10. Abbas Ali Abouei, Mousa Farhadi, Kurosh Sedighi, Lattice Boltzmann Simulation of Heat Exchanger Filled by Porous Mediume, 7th International Chemical Engineering Congress and Exhibition- IChEC 2011, Kish Island,  21 to 24 November 2011.

  11. Ebrahim Alizadeh, Mohsen Shakeri, Mousa Farhadi, Kurosh Sedighi, Javad Iman and Mayam Enayati, Investigation the effect of Methanol Concentration and channel depth on Fuel cell Efficiency, 19th Annual International Conference on Mechanical Engineering-ISME2011, 10-12 May, 2011, University of Birjand, Birjand, Iran.(Farsi)

  12. F. Eskandrinia, K. Sedighi, M. Farhadi, N. Niksefat Abatari ,Numerical study of Heat Transfer in plate fin tubes heat exchanger and analyzing with filed synergy technique,19thAnnual International Conference on Mechanical Engineering-ISME2011, 10-12 May, 2011, University of Birjand, Birjand, Iran.(Farsi)

  13. F. Eskandrinia, K. Sedighi, M. Farhadi, N. Niksefat Abatari ,Numerical Study of turbulent flow in plate heat exchanger with wavy fins,19th Annual International Conference on Mechanical Engineering-ISME2011, 10-12 May, 2011, University of Birjand, Birjand, Iran.(Farsi)

  14. A. A. Rabienataj Darzi, G. A. Sheikzadeh, A. Arefmanesh, M. Farhadi ,Effect of surface roughness of stator on turbulent Flow and heat transfer at the rotor-stator system, 19th Annual International Conference on Mechanical Engineering-ISME2011, 10-12 May, 2011, University of Birjand, Birjand, Iran.(Farsi)

  15. A. A. Rabienataj Darzi, M. Farhadi, K. Sedighi, H. Hassanzadeh Afrouzi, Numerical heat transfer over a rotating disk with axial flow and thin PCM, 19thAnnual International Conference on Mechanical Engineering-ISME2011, 10-12 May, 2011, University of Birjand, Birjand, Iran.(Farsi)

  16. A. A. Rabienataj Darzi, M. Farhadi, K. Sedighi, H. Hassanzadeh Afrouzi, Effect of nanoparticles on mixed convection heat transfer in square cavity with hot obstacle, 19th Annual International Conference on Mechanical Engineering-ISME2011, 10-12 May, 2011, University of Birjand, Birjand, Iran.(Farsi)

  17. Afsane Alizadeh, Mousa Farhadi, Kurosh Sedighi, Simulation of Particle Distribution in house, 2th National Industrial Ventilation and Hygiene Conference, Sharif University of Technology, 2011(Farsi).

  18. Mahmoud Jourabian, Mousa Farhadi, Kurosh Sedighi, Ahmad Ali Rabienataj Darzi, Lattice Boltzmann Simulation Of Natural Convection Melting In A Cavity With Fin, The International Meeting on Advances in Thermofluids (IMAT 2011), 2011.

  19. M. Jafari, M. Farhadi, K. Sedighi, E. Fattahi, Mixed Convection Heat Transfer in Open Ended Cavity Using LBM, The International Meeting on Advances in Thermofluids (IMAT 2011), 2011.

  20. A. Abouei Mehrizi, K. Sedighi, M. Farhadi, H. Hassanzade, Numerical Simulation of forced convection in porous media cavity with inlet and outlet port and hot obstacle by Lattice Boltzmann Method, The International Meeting on Advances in Thermofluids (IMAT 2011), 2011.

  21. M. Nourollahi, M. Farhadi, K. Sedighi, New Selective Structure Function model for Large Eddy Simulation,13th International Conference on Wind Engineering, ICWE 13, 2011.

  22. Ahmad Ali Rabienataj Darzi, Mousa Farhadi, Kurosh Sedighi, Hamid Hassanzadeh Afrouzi, Mahmoud Jourabian, Cooling of Hot Chip in Rectangular Channel Using Phase Change Materials as a Heat Sink, International Conference on Advanced Research and Applications in Mechanical Engineering (ICARAME’11), pp. 385-390, 2011.

  23. Farid Eskandarinia, Mousa Farhadi, Kurosh Sedighi, Nima Niksefat, Turbulent Heat Transfer in Fin and Tube Heat Exchangers, International Conference on Advanced Research and Applications in Mechanical Engineering (ICARAME’11), pp. 127-131, 2011.

  24. Hamid Reza Ashorynejad, Mousa Farhadi, Kurosh Sedighi and Arman Hasanpour, Natural convection in a Porous Medium Rectangular Cavity with an applied Vertical Magnetic Field Using Lattice Boltzmann Method, 2nd International Conference on Mechanical, Industrial, and Manufacturing Technologies (MIMT 2011).

  25. Mostafa Nourollahi, Mousa Farhadi, Kurosh Sedighi, The Effect of Synthetic Inflow Boundary Condition On Large Eddy Simulation, 10th Iranian Aerospace Society Conference March. 1-3/2011 at Tarbiat Modares University.

  26. Mostafa Nourollahi, Mousa Farhadi, Kurosh Sedighi, A New SGS Model Based on Selective Structure Function and WALE Models,10th Iranian Aerospace Society Conference March. 1-3/2011 at Tarbiat Modares University.

  27. Nemati H., Farhadi M., Sedighi K. , Pirouz M. M., Investigation of Flow and Heat transfer over the Rotating Cylinders Using LBM,18th Annual International Conference on Mechanical Engineering-ISME2010, 11-13 May, 2010, Sharif University of Technology, Tehran, Iran.(Farsi)

  28. Fattahi E., Farhadi M., Sedighi K., Effect of Eccentricity on Natural convection in Horizontal Cylindrical Annulus using LBM, 18th Annual International Conference on Mechanical Engineering-ISME2010, 11-13 May, 2010, Sharif University of Technology, Tehran, Iran.(Farsi)

  29. Pirouz M. M., Farhadi M., Sedighi K. and Nemati H, Lattice Boltzmann Simulation of Conjugate Heat Transfer in a Rectangular Channel with Wall-mounted Obstacles, 18thAnnual International Conference on Mechanical Engineering-ISME2010, 11-13 May, 2010, Sharif University of Technology, Tehran, Iran.

  30. Fattahi E., Sedighi K., Farhadi M., Nemati, H., Effect of Eccentricity in Horizontal Annulus Using LBM, 7th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT 2010), 19-21 July, Antalya, Turkey, pp. 1557-1562, 2010.

  31. Nemati H., Farhadi M., Sedighi K. ,Pirouz M. M. and Fattahi E, Lattice Boltzmann simulations of flow and heat transfer past two rotating circular cylinders, 7th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT 2010), 19-21 July, Antalya, Turkey, pp. 931-936, 2010.

  32. Pirouz M. M., Farhadi M., Sedighi K. and Nemati H, Implementation of Lattice Boltzmann method to simulate conjugate heat transfer through heated obstacles,7th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics(HEFAT 2010), 19-21 July, Antalya, Turkey, pp. 901-906, 2010.

  33. Mostafa Nourollahi, Mousa Farhadi, Kurosh Sedighi, Simulation Flow over a Low Aspect Ratio Square Cylinder Confined in a Channel Using a Local SGS Model Based on Coherent Structures, The 9th Iranian Aerospace Society Conference, Feb. 8-10/2010, Islamic Azad University, Science and Research Branch, Tehran, Iran

  34. M. A. Delavar, M. Farhadi, K. Sedighi, A three dimensional two phase flow study of Carbon dioxide generation in the anode side of a DMFC, Alternative Energy Applications, option or necessity?, November 2nd –6th, 2009, KUWAIT

  35. M. A. Delavar, M. Farhadi, M. Shakeri, K. Sedighi, Investigation of the influence of cross section geometry in a DMFC with a three dimensional two phase flow model, Alternative Energy Applications, option or necessity?, November 2nd –6th, 2009, KUWAIT

  36. A. O. Ebrahimnejad, M. Farhadi, K. Sedighi, A 80 W DMFC Experimental data Exergy analysis, Alternative Energy Applications, option or necessity?, November 2nd –6th, 2009, KUWAIT

  37. A. A. Rabinataj Darzi, M. Farhadi, M. Nourollahi, Effect of fin over the flow and mixed heat transfer at the square cavity,17th. Annual (International) Conference on Mechanical Engineering-ISME2009 May, 2009, University of Tehran, Iran.

  38. Rahimi, M., Farhadi, M., Ranjbar, A. A., Sedighi, K, M. J. Hosseini, The Effect of Blockage Ratio with inlet pulsating flow on Convective Heat Transfer and Entropy Generation over Parallel Plates, 12th Fluid Dynamics Conference, April 28-30, 2009, Babol Noshirvani University of Technology, Faculty of Mechanical Engineering, Babol, Iran.(Farsi)

  39. M. J. Hosseini, M. Farhadi, K. Sedighi, M. Nourollahi, Investigation the effect of the shape and arrangement of the wall-mounted obstacles over mixed convection heat transfer in Poiseulle–Benard Channel,12th Fluid Dynamics Conference, April 28-30, 2009, Babol Noshirvani University of Technology, Faculty of Mechanical Engineering, Babol, Iran.(Farsi)

  40. H. Heidary, M. Farhadi, K. Sedighi, M. Nourollahi, the Effect of a Splitter Plate on Flow and Heat Transfer over a Semi Circular cylinder, 12th Fluid Dynamics Conference, April 28-30, 2009, Babol Noshirvani University of Technology, Faculty of Mechanical Engineering, Babol, Iran.(Farsi)

  41. M. M. Pirouz, M. Farhadi, K. Sedighi, H. Nemati,Conjugated heat transfer for a wall-mounted obstacle in a channel using Lattice Boltzmann method, 12th Fluid Dynamics Conference, April 28-30, 2009, Babol Noshirvani University of Technology, Faculty of Mechanical Engineering, Babol, Iran.(Farsi)

  42. M. A. Delavar, M. Farhadi, K. Sedighi, Natural convection and entropy generation in cavity: effect of heater part placement, 12thFluid Dynamics Conference, April 28-30, 2009, Babol Noshirvani University of Technology, Faculty of Mechanical Engineering, Babol, Iran.(Farsi)

  43. R. Gayor, M. Shakeri, K. Sedighi, M. Farhadi, Experimental and numerical study of micro-DMFC, The First National Conference on Hydrogen & Fuel Cell January 20-21, 2009,IUST, Tehran, Iran.

  44. M. Aghajani Delavar, M. Farhadi, K. Sedighi, Numerical Investigation of 3D and unsteady of two phase flow formation of the CO2 in Anode channel of DMFC, The First National Conference on Hydrogen & Fuel Cell January 20-21, 2009, IUST, Tehran, Iran.

  45. Nourollahi, M., Farhadi, M., Sedighi, K, Numerical Study of Heat Transfer in the Poiseulle–Benard Channel in Different Angles, 11th Fluid Dynamics Conference, May 27-29, 2008 K. N. Toosi University of Technology, Faculty of Mechanical Engineering, Tehran, Iran.(Farsi)

  46. Jamshidi Alashti, N., Sedighi, K, Farhadi, M., Numerical Study of Turbulent Flow over a Square ‍Cylinder with Different Angle of Incidence, 11th Fluid Dynamics Conference, May 27-29, 2008 K. N. Toosi University of Technology, Faculty of Mechanical Engineering, Tehran, Iran.(Farsi)

  47. Rahimi, M., Ranjbar, A. A., Sedighi, K, Farhadi, M., The Effect of Blockage Ratio on Convective Heat Transfer and Entropy Generation over Parallel Plates, 16th Annual (International) Conference of Mechanical Engineering ISME 2008, May 13-15, 2008, Shahid Bahonar University of Kerman, Kerman, Iran.(Farsi)

  48. Hosseini, S. J., Farhadi, M., Sedighi, K, Effect of wall-mounted obstacles on mixed convective heat transfer and entropy generation on in the Poiseulle–Benard Channel, 16th Annual (International) Conference of Mechanical Engineering ISME 2008, May 13-15, 2008, Shahid Bahonar University of Kerman, Kerman, Iran.(Farsi)

  49. Fattahi, E., Sedighi, K, Farhadi, M., Effect of Splitter Plate on Convective Heat Transfer Over Semi-Circular Cylinder, 16th Annual (International) Conference of Mechanical Engineering ISME 2008, May 13-15, 2008, Shahid Bahonar University of Kerman, Kerman, Iran.(Farsi)

  50. Fattahi, E.,Farhadi, M., Sedighi, K., Heidari, M., Effect of Splitter Plate on Flow Over Semi-Circular Cylinder, The 7th Iranian Aerospace Society Conference Feb. 19-21/2008, Sharif University of Technology, Tehran, Iran.(Farsi)

  51. Moshfegh, A., Farhadi, M., Numerical Simulation of Particles Dispersion and Deposition in Flow over Two Tandem Square Cylinders in a Channel , 15th Annual (International) Conference of Mechanical Engineering ISME 2007, May 15-17, 2007, Amirkabir University of Technology, Tehran, Iran.

  52. Sedighi, K, Farhadi, M., Ravanbakhsh,Numerical simulation of Anode and cathode of DMFC, 15th Annual (International) Conference of Mechanical Engineering ISME 2007, May 15-17, 2007, Amirkabir University of Technology, Tehran, Iran.(Farsi)

  53. Sedighi, K, Farhadi, M., Ehsanifard, H, 2D numerical investigation of laminar convective heat transfer of flow over heated wall-mounted cubes, 15th Annual (International) Conference of Mechanical Engineering ISME 2007, May 15-17, 2007, Amirkabir University of Technology, Tehran, Iran.(Farsi)

  54. Farhadi, M., Sedighi, K,Ehsanifard, H., Numerical investigation of laminar convective heat transfer of flow over heated wall-mounted cubes, The First Regional Conference on Mechanical Engineering(RCME 2006), December 13, Islamic Azad University, Majlessi Branch, Isfahan, Iran.(Farsi)

  55. Sedighi, K, Farhadi, M., Ravanbakhsh, H., One-dimensional modeling of mass transfer in Anode and electrolyte of Direct Methanol Fuel Cells (DMFC), The First Regional Conference on Mechanical Engineering(RCME 2006), December 13, Islamic Azad University, Majlessi Branch, Isfahan, Iran.(Farsi)

  56. Farhadi, M., Sedighi, K,Madani, M. M., Convective Cooling of Tandem Heated Squares in a Channel, Proceedings of the 3rd BSME-ASME International Conference on Thermal Engineering,20-22 December, Dhaka, Bangladesh, 2006.

  57. Farhadi, M., Sedighi, K, Madani, M., M., Numerical study of laminar convective heat transfer over two square cylinders in the channel, 10th National Conference of Fluid Dynamics, Yazd University, October 31-2 November, 2006, Yazd, Iran.(Farsi)

  58. Farhadi, M., Sedighi, K, Flow over Bluff Bodies using LES, The Fourth International Symposium on computational Wind Engineering (CWE 2006), Yokohama, Japan, pp 621-624, 2006. view pdf version

  59. Hashemian, S. M.,Rahnama, M., Farhadi, M., Turbulent heat transfer in a channel with a built-in square cylinder,The Fourth International Symposium on computational Wind Engineering (CWE 2006), Yokohama, Japan, pp 641-644, 2006.

  60. Farhadi, M., Sedighi, K., Effect of Reynolds number on vortex structure over a cube bluff body, 14th Annual (International) Conference of Mechanical Engineering ISME 2006, Isfahan University of Technology, May 16-18, 2006, Isfahan, Iran.

  61. Farhadi, M., Rahnama, M., Effects of Blockage Ratio on Flow over a Square Cylinder Confined in a Channel Using LES, Proceeding of 13thAnnual Conference and Workshop on Computational Fluid Dynamics (CFD-2005), July 31-August 5, 2005, St. John's, Canada.

  62. Farhadi, M., Rahnama, M., Turbulent flow over a square cylinder confined in a channel at moderate and high Reynolds numbers Using LES,4th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT2005),September 18-22, 2005, Cairo, Egypt.

  63. Rahnama, M., Hashemian, S. M., Farhadi, M., Forced convection heat transfer from a rectangular cylinder: effect of aspect ratio, 16thInternational Symposium on Transport phenomena (ISTP-16), August 29 – September 1, 2005, Prague, Czech Republic. view pdf version

  64. Farhadi, M., Rahnama, M., Study of Turbulent Flow over a Square Cylinder by large Eddy Simulation, 13th Annual (International) Conference of Mechanical Engineering ISME 2005, Isfahan University of Technology, May 17-19, 2005, Isfahan, Iran.

  65. Hashemian, S. M., Rahnama, M., Farhadi, M., 2D Study of Force Convective Heat Transfer of Flow over a Square Cylinder Confined in a Channel, 13th Annual (International) Conference of Mechanical Engineering ISME 2005, Isfahan University of Technology, May 17-19, 2005, Isfahan, Iran.(Farsi)

  66. Farhadi, M., Rahnama, M., Effect of Inlet Velocity Profile on Turbulent Flow over a Wall-Mounted Cube Using LES, 9th National Conference of Fluid Dynamics, Shiraz University, March 8-10, 2005, Shiraz, Iran.(Farsi)

  67. Farhadi, M., Rahnama, M, Large Eddy Simulation of Flow Over a Wall-Mounted Cube (Re=3200), Proceedings of IMECE 2004 Iinternational Mechanical Engineering Conference, Dec. 5-8, 2004, Kuwait.

  68. Salmanzadeh, M., Mansouri, S. H., Farhadi, M., Numerical study of flow and thermal fields in an axisymmetric turbulent jet impinging on a flat plate, Proceedings of IMECE 2004 International Mechanical Engineering Conference, Dec. 5-8, 2004, Kuwait.

  69. Farhadi, M., Rahnama, M., Hashemian, S. M., Large Eddy Simulation of Flow Over a Wall-Mounted Cube (Re=1000), Proceedings of 12thinternational Conference of Iranian Society of Mechanical Engineering, May 18-20, 2004, Tehran, Iran.

  70. Rahnama, M.,Farhadi, M., Large Eddy Simulation of Flow Over a Wall-Mounted Cube (Re=40000), Proceeding of 12th Annual Conference of Computational Fluid Dynamics, May 9-12, 2004, Ottawa, Canada.

  71. Mehrabian, M. A., Farhadi, M., Study of hydroelectric power plant from Energy, Environment, Economy, Renewable sources, Tourism and Employment points of view, proceeding of 3rdinternational conference on fuel conservation in building, Feb. 17-18, 2004, Tehran, Iran. (Farsi)

  72. Rahnama, M., Esmailian, S. R. and Farhadi, M., Numerical Investigation of laminar flow over a square rib: effect of rib length, Proceedings of 11thinternational Conference of Iranian Society of Mechanical Engineering, May 13-15, 2003, Mashhad, Iran.

  73. Rahnama, M.and Farhadi M., Effect of fin height on turbulent natural convection heat transfer in a horizontal annulus, Progress in Transport Phenomena,Elsevier Science Pub. pp 345-350, 2002. (13th International Symposium on Transport Phenomena, 14-18 July, 2002, Victoria BC, Canada).

  74. Rahnama, M.,Farhadi, M., M. A. Mehrabian, Effect of inner cylinder radius on natural convection in a horizontal annulus with two radial fins, Proceedings of 9thAsian Congress of Fluid Mechanics, May 27-31, 2002, Isfahan, Iran.

  75. Rahnama, M.and Farhadi M., Effect of fin height on natural convection heat transfer in a horizontal annulus, Proceedings of 10thinternational Mechanical conference, Tehran, Iran, pp 346-351, 2002.

  76. Rahnama, M.and Farhadi M., Effect of radial fins on turbulent natural convection in a two-dimensional horizontal annulus, ASME-ESDA 2000, July 10-13, 2000, Montreux, Switzerland.

  77. Rahnama, M., S. H. Mansouri, M. Farhadi, and A. Yaghoubi, Turbulent natural convection in a two-dimensional horizontal annulus, Proceedings of 8th Asian Congress of Fluid Mechanics, pp 616-619, 1999. (Dec. 6-10, Shenzhen, China)

  78. Rahnama, M.,M. Farhadi, S. H. Mansouri and A. Sinai, Turbulent Natural Convection in a Horizontal Annulus, Proceedings of 7th Annual meeting of Iranian Society of Mechanical Engineering (ISME) Conference, Sistan and Baluchestan, Iran, 1999, pp 535-545 (Apr. 1999). (Farsi)

  79. Rahnama, M., B. Godrat, S. H. Mansouri, A. Sinai and M. Farhadi, Numerical Investigation of Laminar Flow in Channel with Gradual Expansion, Proceedings of 7th Annual meeting of Iranian Society of Mechanical Engineering (ISME) Conference, Sistan and Baluchestan, Iran, 1999, pp 535-545 (Apr. 1999). (Farsi)

 
Supervised Dissertations and Theses
Supervisor of more than 40 MSc and PhD Student

PhD Theses

      2010      Ebrahim Alizadeh
      2010      Offering quasi-two-dimensional model in order to predict the behavior of methanol fuel cell.
      2010      Supervisors: Kurosh Sedighi and Mousa Farhadi  -  Advisor: Mohsen Shakeri

      2010      Mojtaba Aghajani Delavar ( Assistan Professor at Babol Noshirvani University of Technology )
      2010      Numerical Simulation of direct Methanol fuel cell using Lattice Boltzmann Method.
      2010      Supervisors: Mousa Farhadi and
Kurosh Sedighi

      2013      Naghmeh Jamshidi Alashti ( Assistant Professor at Payame Noor University of Sari )
      2013      Experimental and Numerical Investigation of Nanofluids in a Coiled Tube Heat Exchanger.
      2010      Supervisors: Mousa Farhadi and Davood Domiri Ganji  -  Advisor:
Kurosh Sedighi

      2013      Mostafa Nourollahi
      2013      Modification Structure Function of Large Eddy Simulation Methods.
      2013      Supervisors: Mousa Farhadi and Kurosh Sedighi

      2013      Ahmad Ali Rabienataj Darzi ( Assistan Professor at University of Mazandaran )
      2013      Experimental investigation of heat transfer enhancement in a heat exchanger using helically corrugated tube and Nano-particles
      2013      simultaneously.
      2013      Supervisors: Mousa Farhadi and Kurosh Sedighi  -  Advisor: Rouzbeh Shafaghat


2009 to 2013 Ehsan Fattahi
2009 to 2013 Simulation of multiphase non-Newtonian fluid flow in T-shaped microchannel using LBM.
2009 to 2013 Supervisors: Mousa Farhadi and Kurosh Sedighi

      2016      Arman Hasanpour, . . . .
      2016      Supervisors: Mousa Farhadi and Kurosh Sedighi

Current Stu.  Hamid Hassanzadeh Afrouzi, . . . .
since 9/2012 Supervisors: Mousa Farhadi and Kurosh Sedighi

Current Stu.  Mohammad Jafary, . . . .
since 9/2012 Supervisors: Mousa Farhadi and Kurosh Sedighi

Current Stu.  Sina Yarmohammadi, . . . .
since 9/2012 Supervisor: Mousa Farhadi
 
Research Projects
Selected Research Projects
  • Feasibility of replacing Dry Cooling Tower with Wet Cooling Tower of Zarand Powerplant

  • Construction of 50kw Wind Turbine

  • Injection of Steam at G5 Gas Turbines

  • Simulation of CO2 bubbles in the channels of methanol fuel cell


 
Back to top