Gholamreza Bakeri

Gholamreza Bakeri

Gholamreza Bakeri

غلامرضا باکری
Email:  bakeri[at]nit.ac.ir

Assistant Professor

Gholamreza Bakeri

Assistant Professor

Date of Birth: 3 Feb. 1973

Marital status: Married

Address: Chemical Engineering Faculty, Babol Noshirvani University of Technology, Babol, Iran.

P.O. Box: 484, Babol, Iran.

Tel/Mob: +98 11 323 34 204 / +98 (912) 526 5739

Fax: +98 11 323 34 204

E-mail: bakeri@nit.ac.ir; ghr_bakeri@yahoo.com

 
Qualifications

Sep. 2006 – Nov. 2010

PhD, Chemical Engineering Faculty, Tehran University, Tehran-Iran.

Major: Chemical Engineering

Thesis: Application of Nano-Structure Membranes in Membrane Contactors for Gas Separation.

Supervisors: Professor Takeshi Matsuura (Ottawa University, Canada), Professor Ahmad Fauzi Ismail (UTM University, Malaysia)

 

Sep. 1996 – Dec. 1999

Master of Science, Chemical Engineering Faculty, Amirkabir University of Technology, Tehran-Iran.

Major: Chemical Engineering

Thesis: Bench Scale Preparation of Chemical Blowing Agent Used for Production of Foamed Polymer (Azodicarbonamide)

Supervisor: Professor Mohammad Edrisi

 

Sep. 1991 – Jul. 1996

Bachelor of Science, Chemical Engineering Department, Shiraz University, Shiraz-Iran.

Major: Chemical Engineering, Petrochemical Processes

Project: Preparation of Multivariable Linear Curve Fitting Software, Using Least Squares Method (Programming with Turbo C++).

Supervisor: Professor Abdolmohammad Alamdari

Teaching Assistant (TA) for the Course "Application of Mathematics in Chemical Engineering", Shiraz University, Shiraz-Iran, 1995-1996.

Trainee in Iranian Research Organization for Science and Technology (Fars Center), Shiraz, Iran, 1994.

Visiting Scholar, Advanced Membrane Technology Research Centre (AMTEC), Faculty of Petroleum & Renewable Energy Engineering, Universiti Teknologi Malaysia (UTM), Malaysia, 2009.

Visiting Researcher, Advanced Membrane Technology Research Centre (AMTEC), Faculty of Petroleum & Renewable Energy Engineering, Universiti Teknologi Malaysia (UTM), Malaysia, 2012.

Visiting Researcher, Advanced Membrane Technology Research Centre (AMTEC), Faculty of Petroleum & Renewable Energy Engineering, Universiti Teknologi Malaysia (UTM), Malaysia, 2013.

 
Research Interests
 
Honors and Awards

[1] Ranked 1st among more than 400 participants in PhD entrance exam, Chemical Engineering Faculty, Tehran University, Tehran, Iran, 2006.

[2] Ranked 1st among the people participated in nation-wide university entrance exam for B.Sc. degree in chemical engineering, 1991.

[3] Ranked 146th among more than 300,000 participants in nation-wide university entrance exam for B.Sc. degree, 1991.

[4] Accepted in the first step of national-wide Mathematic Olympiad among the Iranian students participated, 1990.

 
Previous and Present Positions
 
Professional Membership
 
Teaching Experiences

[1] Optimization of Chemical Processes (PhD).

[2] Chemical Process Equipment Design (M.Sc.).

[3] Advanced Mass Transfer (M.Sc.).

[4] Optimization of Chemical Processes (M.Sc.).

[5] Thermodynamics (B.Sc.).

[6] Plant Design and Economics for Chemical Engineering (B.Sc.).

[7] Petrochemical Processes (B.Sc.).

[8] Basic Principles and Calculations in Chemical Engineering (B.Sc.).

[9] Chemical Engineering Software (B.Sc.).

[10] Application of Mathematics in Chemical Engineering, (B.Sc.).

[11] Industrial Chemistry (B.Sc.).
 
Publications

- Book

Gh. Bakeri, H. Aliverdilou, E. Aminnia, Powder Paints Application Principles.

[1]




- Journal  Paper / Book Chapter

غلامرضا باکری، مصطفی رحیم نژاد، زینب فلاح نژاد، کاربرد تکنولوژی غشایی در تصفیه پساب های نفتی و بررسی عملکرد غشا نانوساختار الیاف توخالی پلی اتر سولفون در تصفیه پساب های نفتی، ارسال به فصلنامه علوم و تکنولوژی محیط زیست (در حال داوری).

 

[31]

غلامرضا باکری، زینب فلاح نژاد، تصفیه پساب­های نفتی با استفاده از غشا الیاف توخالی پلی­اترسولفون و بررسی عملکرد غشاهای مختلف، ارسال به فصلنامه علمی-پژوهشی آب و فاضلاب (در حال داوری).

 

[30]

غلامرضا باکری، مصطفی رحیم نژاد، زینب فلاح نژاد، مروری بر تصفیه پساب­های­نفتی توسط تکنولوژی­غشایی و مطالعه تجربی تصفیه پساب ­نفتی با استفاده از غشا نانوساختار پلی­اترسولفون، ارسال به فصلنامه علمی ترویجی فرآیند نو (در حال داوری).

 

[29]

Gh. Bakeri, S. Naeimifard, A.F. Ismail, T. Matsuura, Porous PES hollow fiber membrane in membrane contactor for gas humidification process, submitted to Chemical Engineering Journal.

 

[28]

Seyed Abdollatif Hashemifard, Takeshi Matsuura, Ahmad Fauzi Ismail, Masoud Rezaei DashtArzhandi, Dipak Rana, Gholamreza Bakeri, Characterization of partial pore wetting in hollow fiber gas absorption membrane contactors: An EDX analysis approach, submitted to Chemical Engineering Journal (under review).

 

[27]

Masood Rezaei, Ahmad Fauzi Ismail, Gholamreza Bakeri, Takeshi Matsuura, Seyed Abdollatif Hashemifard, Development of enhanced thermal properties mixed matrix PVDF/ montmorillonite hollow fiber membranes for efficient CO2 stripping via membrane contactor, submitted to Chemical Engineering Journal (under review).

 

[26]

Mostafa Rahimnejad, Gholamreza Bakeri, Mostafa Ghasemi, Alireza Zirepour, A review on the role of Proton Exchange Membrane on the performance of Microbial Fuel cell, Polymers for Advanced Technologies DOI: 10.1002/pat.3383.

 

[25]

Gh. Bakeri, A. Kazemi Joujili, M. Rahimnejad, A.F. Ismail, S.M. Imeni, T. Matsuura, Separation of olefins from paraffins by membrane contactor - A Review, as a chapter in Membrane Technology for Water and Wastewater Treatment, Energy and Environment, CRC Press, Taylor & Francis Group (under progress).

 

[24]

Gh. Bakeri, A.F. Ismail, M. Rezaei DashtArzhandi, T. Matsuura, Porous PES and PEI hollow fiber membranes in gas-liquid contacting process - A comparative study, Journal of Membrane Science 475 (2015) 57–64.

 

[23]

M. Rezaei, A.F. Ismail, Gh. Bakeri, S.A. Hashemifard, T. Matsuura, Effect of general Montmorillonite and Cloisite 15A on structural parameters and performance of mixed matrix membranes contactor for CO2 absorption, Chemical Engineering Journal 260 (2015) 875-885.

 

[22]

Gh. Bakeri, A.F. Ismail, T. Matsuura, M.S. Abdullah, B.C. Ng,  Effect of PVDF blending on the structure and performance of PEI hollow fiber membrane in CO2 separation process, submitted to International Journal of Greenhouse Gas Control (under review).

 

[21]

M. Rezaei, A.F. Ismail, S.A. Hashemifard, Gh. Bakeri, T. Matsuura, Experimental study on the performance and long-term stability of PVDF/Montmorillonite hollow fiber mixed matrix membranes for CO2 separation process, International Journal of Greenhouse Gas Control 26 (2014) 147-157.

 

[20]

Mostafa Rahimnejad, Ghasem. D. Najafpour, A.A Ghoreyshi, Gholamreza Bakeri, Farid Talebnia, Sang-Eun Oh, Investigation of different mediators in microbial fuel cell with cyclic voltammeter, Pakistan Journal of Biotechnology 10(2) (2013) 37-51.

 

[19]

M. Rahimnejad, Gh. Bakeri, Gh. Najafpour, M. Ghasemi, S.E. Oh, A review on the effect of proton exchange membranes in microbial fuel cells, Biofuel Research Journal 1 (2014) 7-15.

 

[18]

Gh. Bakeri, A.F. Ismail, M. Rahimnejad, T. Matsuura, Analysis of Polyetherimide / N-Methyl-2-Pyrrolidone / nonsolvent phase separation behavior, Journal of polymer Research (2014) 21:386.

 

[17]

Gh. Bakeri, A.F. Ismail, M. Rahimnejad, T. Matsuura, Porous polyethersulfone hollow fiber membrane in gas–liquid contacting processes, accepted in Chemical Engineering Research and Design.

 

[16]

A. Tardast, M. Rahimnejad, Gh. Najafpour, G.C. Premier, Gh. Bakeri, S.E. Oh, A. Ghoreyshi, Use of artificial neural network for the prediction of bioelectricity production in a membrane less microbial fuel cell, Fuel 117 (2014) 697-703.

 

[15]

F. Nasrollahi, Gh. Bakeri, A.F. Ismail, M. Rahimnejad, M. Imanian, Development of a model for DME non-adiabatic reactors to improve the methanol conversion, Korean Journal of Chemical Engineering 30(10) (2013) 1867-1875.

 

[14]

Gh. Bakeri, M. Rahimnejad, Kinetics study of hydrazodicarbonamide synthesis reaction, Chemical Industry & Chemical Engineering Quarterly 19 (2) 273-279 (2013).

 

[13]

Mostafa Rahimnejad, Mostafa Ghasemi, Ghasem Najafpour, Ali Ghoreyshi, Gholamreza Bakeri, Seyed Karim Hassani Nejad, Farid Talebnia, Acetone removal and bioelectricity generation in dual chamber microbial fuel cell, American Journal of Biochemistry and Biotechnology 8(4) (2012) 304-310.

 

[12]

Mostafa Rahimnejad, Ghasem Darzi Najafpour, Ali Asghar Ghoreyshi, Farid Talebnia, Giuliano C. Premier, Gholamreza Bakeri, Jung Rae Kim, Sang-Eun Oh, Thionine increases electricity generation from microbial fuel cell using Saccharomyces cerevisiae and exoelectrogenic mixed culture, The Journal of Microbiology 50(4) (2012) 575-580.

 

[11]

Mostafa Rahimnejad, Ghasem Najafpour, Gholamreza Bakeri, Investigation and modeling of effective parameters influencing the size of BSA protein nanoparticles as colloidal carrier, Colloids and Surfaces A: Physicochemical and Engineering Aspects 412 (2012) 96-100.

 

[10]

Gh. Bakeri, A.F. Ismail, M. Rahimnejad, T. Matsuura, D. Rana, The effect of bore fluid type on the structure and performance of polyetherimide hollow fiber membrane in gas-liquid contacting processes, Separation and Purification Technology 98 )2012) 262-269.

 

[9]

G. Bakeri, D. Rana, A.F. Ismail, T. Matsuura, A. Ghaee, Performance of surface-modified poly(etherimide) hollow-fiber membranes in a membrane gas-liquid contacting process with response surface methodology, Journal of Applied Polymer Science 128(2) (2013) 1313-1325.

 

[8]

Gh. Bakeri, A.F. Ismail, D. Rana, T. Matsuura, Development of high performance surface modified polyetherimide hollow fiber membrane for gas-liquid contacting processes, Chemical Engineering Journal 198-199 (2012) 327-337.

 

[7]

Gh. Bakeri, T. Matsuura, A.F. Ismail, D. Rana, A novel surface modified polyetherimide hollow fiber membrane for gas-liquid contacting processes, Separation and Purification Technology 89 (2012) 160-170.

 

[6]

Gh. Bakeri, T. Matsuura, A.F. Ismail, The effect of phase inversion promoters on the structure and performance of polyetherimide hollow fiber membrane using in gas-liquid contacting process, Journal of Membrane Science 383 (2011) 159-169.

 

[5]

Gh. Bakeri, A.F. Ismail, D. Rana, T. Matsuura, Investigation on the effects of fabrication parameters on the structure and properties of surface modified membranes using response surface methodology, Journal of Applied Polymer Science 123 (2012) 2812-2827.

 

[4]

Gh. Bakeri, A.F. Ismail, T. Matsuura, Effect of polymer concentration on the structure and performance of polyetherimide hollow fiber membranes, Journal of Membrane Science 363 (2010) 103-111.

 

[3]

M. Fazlollahnejad, M. Taghizadeh, A. Eliassi, Gh. Bakeri, Experimental study and modeling of an adiabatic fixed-bed reactor for methanol dehydration to dimethyl ether, Catalysis, Kinetics and Reactors, Chinese Journal of Chemical Engineering 17(4) (2009) 630-634.

 

[2]

Maryam Mohagheghi, Gholamreza Bakeri, Maryam Saeedizad, Study of the effects of external and internal diffusion on the propane dehydrogenation reaction over Pt-Sn/Al2O3 catalyst, Chemical Engineering & Technology Journal 30(12) (2007) 1721-1725.

 

[1]


- Conference Paper

حسين روئين تن، غلامرضا باكري، شيما عزيزي، بررسي آزمايشگاهي سينتيك جذب گاز پروپان و پروپيلن در حلال حاوي كاتيون فلزي، اولين همايش ملي توسعه دانش بنيان صنايع نفت، گاز و پتروشيمي، 1392.

 

[19]

سرور نعیمی فرد، غلامرضا باکری، ابراهیم صادقی، مدلسازی رطوبت زن غشایی و بررسی پارامترهای تاثیرگذار بر عملکرد آن برای کنترل رطوبت پیل سوختی غشا پلیمری، اولین همایش ملی مدیریت انرژی های نو و پاک، شهریور 1393.

 

[18]

غلامرضا باکری، زینب فلاح نژاد، مروری بر تصفیه پساب های نفتی با استفاده از تکنولوژی غشا، هشتمين كنگره ملّي مهندسي عمران، دانشكده مهندسي عمران، بابل، 17 و 18 ارديبهشت ماه 1393.

 

[17]

پانیذ ایزدی، مصطفی رحیم نژاد، حسین امانی، غلامرضا باکری، سید کریم حسنی نژاد، فرید طالب نیا، تصفيه پساب حاوی سولفيد با استفاده از تکنولوژی جديد پيل سوختی ميکروبی و توليد انرژی پاک بصورت همزمان، هشتمين كنگره ملّي مهندسي عمران، دانشكده مهندسي عمران، بابل، 17 و 18 ارديبهشت ماه 1393.

 

[16]

حسين اماني، علي خدام، مصطفي رحيم نژاد، غلامرضا باكري، بهينه سازي توليد ماده فعال سطحي بيولوژيكي به منظور حذف نفت خام از روي آب، هشتمين كنگره ملّي مهندسي عمران، دانشكده مهندسي عمران، بابل، 17 و 18 ارديبهشت ماه 1393.

 

[15]

A. Kazemi Joujili, Gh. Bakeri, M. Rahimnejad, A.F. Ismail, S.M. Imeni , Separation of olefins from paraffins by membrane contactor - A review, Membrane Science and Technology 2013 (MST 2013), Kuala Lumpur, Malaysia.

 

[14]

حسين اماني، غلامرضا باكري، رقيه سيفي، الهه مهرورز، بررسي مقدار امولسيون شوندگي نفت خام با استفاده از روش هاي بيولوژيكي، سومين همايش مديريت پساب و پسماند صنعت در صنايع نفت و انرژي، تهران، 7 دي 1391.

 

[13]

مستعان شاعری، مصطفي رحيم نژاد، غلامرضا باكري، داريوش عليپور، بررسي فرآيندهاي توليد بيوديزل و نقش كاتاليزورهاي مختلف جهت توليد سوختي پاك، سومین همایش بیوانرژی ایران (بیوماس و بیوگاز).

 

[12]

Mostafa Rahimnejad, Ghasem Najafpour, Ali asghar Ghoreyshi, Farid Talebnia, Gholamreza Bakeri, Sang-Eun Oh, Effect of Thionine as electron shuttle for production of bioelectricity in microbial fuel cell, 5th Iranian Fuel Cell Seminar, Tarbiat Modares University, Iran, Feb. 2012.

 

[11]

Gh. Bakeri, F. Nasrollahi, Modeling of Non-adiabatic Reactors, Used in Di-Methyl Ether (DME) Synthesis, 6th International Chemical Engineering Congress & exhibition (IChEC 2009), Kish Island, Iran, 2009.

 

[10]

M. Fazlollahnejad, M Taghizadeh, A Eliassi, G. Bakeri, One-Dimensional Heterogeneous Plug Flow Model was Employed to Model an Adiabatic Fixed Bed Reactor, 6th International Chemical Engineering Congress & exhibition (IChEC 2009), Kish Island, Iran, 2009.

 

[9]

M. Fazlollahnejad, M. Taghizadeh, A. Elyasi, Gh. Bakeri, Modeling and Simulation of Fixed Bed Adiabatic Reactor for Di-Methyl Ether (DME) Synthesis Using g-Al2O3 Catalyst, The 12th Iranian Chemical Engineering Congress, Sahand University of Technology, 20-23 October, 2008.

 

[8]

Maryam Mohagheghi, Gholamreza Bakeri, Kinetic Studies of Propane Dehydrogenation Over Pt-Sn/Al2O3 Catalyst, XVIII International Conference on Chemical Reactors [CHEMREACTOR-18], Malta, September 29-October 3, 2008.

 

[7]

Gh. Bakeri, M. Edrisi, Kinetics Study of Hydrazodicarbonamide Synthesis Reaction, 5th International Chemical Engineering Congress & exhibition (IChEC 2008), Kish Island, Iran, 2008.

 

[6]

M. Mohagheghi, Gh. Bakeri, M. Saeedizad, M. Soltani, Kinetic Studies of Propane Dehydrogenation over Pt-Sn/Al2O3 Catalyst, 5th International Chemical Engineering Congress & exhibition (IChEC 2008), Kish Island, Iran, 2008.

 

[5]

M. Mohagheghi, Gh. Bakeri, M. Saeedizad, Study of external and internal diffusion effects on propane dehydrogenation reaction over Pt-Sn/Al2O3 catalyst, 11th Iranian Chemical Engineering Congress, Tarbiat Modares University, Iran, Nov. 2006.

 

[4]

H. Aliverdilou, V. Behjat, E. Aminnia, Gh. Bakeri, Measurement of technology level of enameled wire production industries in Iran, using technological capabilities model, 21th International Power System Conference, Tehran, Iran, Nov. 2006, pp 1084-1092.

 

[3]

Gh. Bakeri, H. Aliverdilou, E. Aminnia, Feasibility Study on Using Powder Paints for Coating of Power Transformers in IranTransfo Company, 7th Power System Conference, Power and Water University of Technology, Tehran, Iran, Nov. 2006.

 

[2]

H. Aliverdilou, E. Aminnia, Gh. Bakeri, An Study on Amorphous Materials, Used in the Core of Distribution Transformers, 7th Power System Conference, Power and Water University of Technology, Tehran, Iran, Nov. 2006.

 

[1]


 
Supervised Dissertations and Theses
 
Research Projects

Research Projects

[Project Manager]: "Modeling and Simulation of Isothermal DME Synthesis Reactor", Tehran, Iran.

[Project Manager]: "An Investigation on DME Market with Focus on its Trend in the Future", Tehran, Iran.

[Project Engineer]: "Kinetic Studies of Propane Dehydrogenation over Pt-Sn/Al2O3 Catalyst", Tehran, Iran, 2007.

[Project Manager]: "Optimization of Coating Systems Which are Using for Surface Protection of Transformer Power Box and its Accessories in IranTransfo Company", Tehran, Iran, 2005-2006.

[Project Engineer]: "A Study on Current Situation and Future Trends of Enameled Wire Industry in Iran and in the World and Propose of Appropriate Solutions to Achieving a Suitable Position", Tehran, Iran, 2005.

[Project Manager]: "Feasibility Study for Replacement of Liquid Paints with Powder Paints in IranTransfo Company", Tehran, Iran, 2003-2004.

[Project Manager]: "Technology Assessment and Selection for Askarel Oils and PCB Contaminated Oils Destruction", Tehran, Iran, 2001-2003.

[Project Manager]: "An Exhaustive Study on the Production Methods of Bisphenol A (BPA) by Resin Based Catalysts", Tehran, Iran, 2003.

[Project Manager]: "Formulation Achievement and Production of Slipping Agent Compound, Used in Polyethylene and Polypropylene Film Production Process", Tehran, Iran, 2002.

[Project Manager]: "Potassium Iodate Pilot Scale Production and Optimization of Operating Conditions", Parchin Chemical Industries, Tehran, Iran, 2002.

[Project Engineer]: "Feasibility Study for Cast Resin Transformer Production in IranTransfo Company", Tehran, Iran, 2001.

[Project Manager]: "Technology Assessment for Transformer Oil Manufacturing", Tehran, Iran, 2001.

[Project Engineer]: "Bench Scale Production of AlF3", Chemical Research Center, Iranian Research Organization for Science and Technology, Tehran, Iran, 1999-2000.

[Project Engineer]: "A New Method for Bench-scale Production of HF", Chemical Research Center, Iranian Research Organization for Science and Technology, Tehran, Iran, 1999-2000.

[Project Engineer]: "Beneficiation of Iranian Ocher", Chemical Research Center, Iranian Research Organization for Science and Technology, Tehran, Iran, 1999.

[Project Engineer]: "Extraction of Cobalt & Cadmium from Zinc Plant Waste", Chemical Research Center, Iranian Research Organization for Science and Technology, Tehran, Iran, 1999.

[Project Engineer]: "Production of Cut Flower Preservative", Laleh Mahallat Company, Mahallat, Iran, 1999.

[Project Manager]: "Bench Scale Preparation of Polymer Chemical Blowing Agent (Azodicarbonamide)", Tehran, Iran, 1998-1999.

[Project Manager]: "Hydrazine Synthesis", Tehran, Iran, 1998.

[Project Engineer]: "Investigation on Parameters, Affecting on Barberry Drying Process", Amirkabir University, Tehran, Iran, 1998.

[Project Manager]: "Determination and Optimization of CO2 and O2 Contents in Water, Used for Trout Production", Fisheries Office (Fars Center), Shiraz, Iran, 1995-1996.

[Project Engineer]: "Bench Scale Production of Gelatin and Animal Glue from Animal Wastes", Trainee Project, Iranian Research Organization for Science and Technology (Fars Center), Shiraz, Iran, 1994.

 

Executive and Engineering Projects

[Project Manager]: "Pre-commissioning, commissioning and startup of Di-Methyl Ether pilot plant with a capacity of 1.5 ton per day", Tehran, Iran.

[Project Manager]: "Pre-Feasibility Study of South Pars Condensate Refinery (120,000 BPD)", Hirbodan Engineering Co., Tehran, Iran, 2009.

[Project Engineer]: "Pre-Feasibility Study of Revamping Aromatic Plant via Changing HDA Unit to TDP Unit", Bandar Imam Petrochemical Complex (BIPC), Mahshar, Iran, 2008.

[Project Manager]: "Characterization of Packing, Used in Separation Towers of Di-Methyl Ether (DME) Pilot Plant", Tehran, Iran, 2007.

[Project Engineer]: "Know-how Achievement and Basic Design of Propane Dehydrogenation (PDH) Pilot Plant", Tehran, Iran, 2006.

[Project Engineer]: "Basic Design of Di-Methyl Ether (DME) Commercial Plant with a Capacity of 800,000 tons/year", Tehran, Iran, 2004.

[Project Engineer]: "Resident Engineer in Haldor Topose A/S Company (During Implementation of DME Plant Basic Design)", 2004.

[Project Engineer]: "Preliminary Design of Chloroalkali Pilot Plant for Arvand Petrochemical Company", , Tehran, Iran, 2004.

[Project Manager]: "Basic Design & Feasibility Survey of Sufflower Oil Extraction Plant", Industrial Development & Renovation Organization of Iran (IDRO), Tehran, Iran, 2003.

[Project Manager]: "Design of Pilot Plant for Acetophenone Production", Chemical Research Center, Iranian Research Organization for Science and Technology, Tehran, Iran, 2002.

[Project Manager]: "Design of Pilot Plant for Ethylene Diamine Production", Chemical Research Center, Iranian Research Organization for Science and Technology, Tehran, Iran, 2002.

[Project Manager]: "Preliminary Design & Feasibility Study of Acetophenone Plant", Chemical Research Center, Iranian Research Organization for Science and Technology, Tehran, Iran, 2002.

[Project Manager]: "Preliminary Design & Feasibility Study of Ethylene Diamine Plant", Chemical Research Center, Iranian Research Organization for Science and Technology, Tehran, Iran, 2002.

[Project Manager]: "Preliminary Design & Feasibility Study of Tannin & Animal Feed Production from Pistachio Wastes", Biotechnology Research Center, Iranian Research Organization for Science and Technology, Tehran, Iran, 2001.

[Project Manager]: "Preliminary Design & Feasibility Study of Agar & Biofertilizer Plant from Persian Gulf Seaweeds", Biotechnology Research Center, Iranian Research Organization for Science and Technology, Tehran, Iran 2001.

[Project Manager]: "Preliminary Design & Feasibility Study of Pectin & Animal Feed Production from Citrus Wastes", Biotechnology Research Center, Iranian Research Organization for Science and Technology, Tehran, Iran, 2001.

[Project Engineer]: "Preliminary Design & Feasibility Study of Bacilus Thuringiensis Plant", Biotechnology Research Center, Iranian Research Organization for Science and Technology, Tehran, Iran, 2000.

[Project Engineer]: "Basic Design of Zinc Sulfate Plant from Zinc Ash", Aria Chemistry Company, Tehran, Iran, 2000.

[Project Manager]: "Design of Pilot Plant for Production of a polymer Blowing Agent", Chemical Research Center, Iranian Research Organization for Science and Technology, Tehran, Iran, 1999.

[Project Engineer]: "Preliminary Design & Feasibility Study of Iron Fertilizer (Fe-EDDHA) Plant", Chemical Research Center, Iranian Research Organization for Science and Technology, Tehran, Iran, 1999.

[Project Manager]: "Production of Biocide for Poultry Houses", Aria Chemistry Company, Tehran, Iran (1997-1999).

[Project Engineer]: "Basic Design of Sodium Silicofluoride Production unit from Dicalcium Phoshphate production plant waste", Chemical Research Center, Iranian Research Organization for Science and Technology, Tehran, Iran, 1998.

 

Supervision on Research Projects

[1] "Fabrication of Flat Sheet and Hollow Fiber Membranes for Separation of Ethylene from Purge Gases", Tehran, Iran.

[2] "Application of Membrane Technology in Petrochemical Company", Tehran, Iran, 2007.

[3] "Investigation of Biofouling Reduction in Reverse Osmosis Membrane Used for Treatment of Ion Exchange Regeneration Wastewater", Tehran, Iran, 2007.

[4] "Preliminary Technical and Economical Feasibility Study on Aluminum Fluoride Production Plant", Tehran, Iran, 2006.

[5] "Preparation of Pure BPA by Crystallization of Raw BPA or BPA-Adduct in a Solvent", Tehran, Iran, 2005-2006.

[6] "The Effect of Impurities on Kinetics of BPA Adductive Crystallization", Tehran, Iran, 2005-2006.

[7] "Kinetics of Recrystallization of BAP-Phenol Adduct", Tehran, Iran, 2005-2006.

[8] "Preparation and Characterization of BPA by Ion Exchange Resin, Used in Khozestane Petrochemical Company as Catalyst and Study of Effective Parameters on Reaction Yield", Tehran, Iran, 2005-2006.

[9] "Recovery of Styrene and o-Xylene from Pyrolysis Gasoline, Using Crystallization Process", Tehran, Iran, 2005.

[10] "Preparation of Operator Training Simulator Software for Di-Methyl Ether (DME) Plant", Tehran, Iran, 2004-2005.

[11] "Pilot Scale Study on Cyclohexane Production by Benzene Hydrogenation", Tehran, Iran, 2004.

[12] "Technical and Economical Feasibility Study on Replacement Ceramic Bushings with Polymeric Bushings in IranTransfo Company", Tehran, Iran, 2001-2002.

 
Back to top